What is the appropriate tire pressure for cars in winter?

2 Answers
McFelicity
07/24/25 6:46am
Winter tire pressure should be around 2.6-2.7bar. According to the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5bar. Based on the principle of thermal expansion and contraction, winter tire pressure should be adjusted slightly higher than the standard tire pressure by about 0.2bar. Additional information: Other factors to consider for car tire pressure: 1. Seasonal factors: In winter, adjust the tire pressure slightly higher than the standard by about 0.2bar. In summer, use the lower limit of the standard tire pressure. If the car is parked outdoors in summer, the pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures. 2. Tire condition: For new tires, the pressure can be set slightly higher than the standard by about 0.2bar. For old tires, adjust the pressure slightly lower according to the standard. If the tires are severely worn, use the lower limit of the standard tire pressure.
Was this review help?
12
3
Share
McStella
08/11/25 2:31am
I see many people neglecting tire pressure in winter, which is unacceptable. Low tire pressure makes it easy to skid on snow, lose grip on the road, and lose control when braking. Having driven for decades, I know that tire pressure naturally drops a bit in winter due to the rapid temperature drop, but never add air randomly. The standard label in the car is usually located on the driver's door edge or glove compartment, showing the normal tire pressure range, such as between 32 and 35 psi. Checking it when the car is cold in the morning before heading out is the most accurate—just press with your finger or buy a small tire pressure gauge. Overinflating makes the ride uncomfortably bumpy, while underinflation wears out the tires faster and shortens their lifespan. Once, I forgot to check and had a blowout on the highway—how dangerous! I remind everyone to check once a month for safety.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

What documents are required for motorcycles to access highways?

To ride a motorcycle on the highway, you need a motorcycle driver's license. Here are several additional conditions that must be met for motorcycles on highways: 1. Wear a safety helmet: Due to the high speed on highways and the relatively lower safety performance of motorcycles, wearing a helmet that complies with traffic regulations is necessary to ensure driving safety. 2. Drive in the rightmost lane: High-speed driving is no joke. When riding on the highway, motorcycles must stay in the rightmost lane and are prohibited from changing lanes. Zigzagging through traffic on the highway is not allowed. 3. No passengers: Motorcycles are not allowed to carry passengers on highways. Given the high speed, carrying passengers poses significant safety risks. 4. Speed control: According to relevant traffic regulations, the speed of motorcycles on highways must be maintained between 60km/h and 80km/h.
13
3
Share

Do You Need to Press AC When Turning on the Air Conditioner in Winter?

You do not need to press the AC button when turning on the air conditioner in winter. The AC button controls the car's air conditioning compressor, which is only necessary when cooling in the summer. Pressing the AC button activates the compressor to provide cooling. Warm air, on the other hand, utilizes the car's internal heat circulation principle and does not require the air conditioning compressor. The heating system uses the heat generated by the engine to warm the air. After the engine's cooling system dissipates heat, a fan directs this heat into the car's cabin to produce warm air. Even if the heating is not turned on, the heat generated by the engine's operation is expelled outside the car. Car heating is a form of waste heat recycling. Using the heating system in winter does not affect the car's performance or increase fuel consumption.
18
2
Share

How many cylinders does the Honda Lingpai have?

Honda Lingpai has pure gasoline models and hybrid models. The pure gasoline models use a three-cylinder engine, while the hybrid models use a four-cylinder engine. Here is more information about the Honda Lingpai: 1. Overview: The Honda Lingpai is a compact sedan under the Honda brand, with a wheelbase of 2730 mm, and dimensions of 4756 mm in length, 1804 mm in width, and 1509 mm in height. 2. Configuration: The hybrid version of the Honda Lingpai uses a 1.5-liter naturally aspirated four-cylinder engine, while the pure gasoline version uses a 1.0-liter turbocharged three-cylinder engine.
2
3
Share

What is the wheel size of the Civic?

Ten generations of Civic wheels come in two sizes: 16 inches and 17 inches. Here is detailed information about car wheels: Overview: The wheel hub is the rotating part of the wheel steel inside the tire connected by columns to the wheel core, that is, the metal component that supports the center of the tire mounted on the axle. It is also called the rim, steel ring, or wheel. There are many types of wheel hubs based on diameter, width, forming method, and material. Development: In the past, the wheel bearings of cars were mostly used in pairs with single-row tapered roller or ball bearings. With technological advancements, cars have widely adopted car wheel hub units. The use and scope of wheel bearing units are increasing and have now developed to the third generation.
6
1
Share

What Causes Steering Wheel Vibration During Vehicle Startup?

Vehicle startup steering wheel vibration may be caused by: 1. Throttle malfunction; 2. Spark plug failure leading to multiple cylinders not working; 3. Abnormal fuel pump pressure, incorrect intake pressure sensor readings, or poor performance; 4. Substandard fuel quality resulting in unqualified injector atomization and incomplete combustion of air-fuel mixture in cylinders. Solutions for steering wheel vibration during startup include: 1. Removing engine carbon deposits; 2. Replacing air filter, oil filter, and fuel filter. The steering wheel is a rotational device for controlling driving direction, which converts the driver's force applied to its rim into torque transmitted to the steering shaft.
20
1
Share

Car Film Outside or Inside?

Car window film should be applied to the inside of the car glass, not the outside. If applied to the outside, it is easily eroded by wind and frost, leading to faster aging and a shortened lifespan. The functions of window film are as follows: 1. UV Protection: It primarily blocks ultraviolet rays, reduces heat, and prevents injuries caused by sudden glass shattering. Additionally, the one-way visibility feature of solar film helps protect personal privacy. 2. Reduced Air Conditioning Consumption: Applying heat-insulating film can compensate for the loss of air conditioning cooling capacity, instantly lowering the interior temperature and achieving a certain degree of fuel savings. 3. Enhanced Aesthetics: Based on personal preferences, applying film can personalize and beautify your car. 4. Anti-Glare: Reduces accidents caused by glare factors.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.