What is the appropriate tire pressure for a Volvo XC60?

1 Answers
Beatrix
07/29/25 11:46am
Volvo XC60 tire pressure should be: 2.4-2.5 bar. Hazards of excessive tire pressure: Tire friction and adhesion will decrease, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern of the tire, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Reduces puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more easily punctured, and impacts can cause internal cracks and blowouts, leading to tire bursts. Hazards of insufficient tire pressure: Increases friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, posing safety risks; Increases movement of various tire parts, causing abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, leading to delamination or cord breakage, and excessive friction with the rim causing damage and abnormal wear at the bead area; Multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in tire bursts; Increases tire deformation, making the sidewalls prone to cracks and causing flexing movements, leading to excessive heat, rubber aging, cord fatigue, and breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
Was this review help?
16
3
Share
More Forum Discussions

How to Replace the Front Brake Pads of a Magotan?

First, inspect the wheel where the front brake pads are located, then use a wrench with a socket to remove the bolts securing the brake pads, and proceed to take out the old brake pads. After installing the new brake pads, tighten the guide bolts and perform a brake reset.
18
5
Share

How to Start and Park an Audi A6?

Press the one-button start, depress the brake pedal on the left side, hold the side button with your hand, and shift the lever to D/S gear to start. When parking, shift to P or N gear. With the engine running, simply depress the brake pedal and lightly press the one-button start to turn off the engine.
18
1
Share

How to Reset the Polo Maintenance Reminder?

First, do not turn the key. Firmly press and hold the trip reset button located below the speedometer. Continue holding it for the next step. While holding the reset button, turn the key to the self-test position (do not start the engine), keeping the button pressed. Hold the reset button for more than 10 seconds, then release it to successfully clear the reminder.
17
4
Share

What are the steps to defog the interior of a Geely car?

You can set the fan speed to maximum, turn on the A/C air conditioning switch, adjust the temperature to the lowest setting, and press the front window defogging button to disperse the fog on the door windows. Simply turn on the automatic air conditioning switch, adjust the temperature to the lowest setting, and press the front window defogging button. Turn on the car's fan and cooling switch, and direct cold air to the front windshield. The fog will disappear quickly, with a very direct effect.
6
1
Share

How to Program a Nissan Tiida Car Key?

Enter the NATS system menu under OFF-KEY. Select "Steering-Lock-Release" to deactivate the steering column lock. Turn on the ignition key, exit the Consult-II system and re-enter to initialize the NATS system. Proceed with key registration. After initializing the ignition key, turn it off and then turn it on again. The security indicator light will flash 5 times, indicating successful key registration.
17
2
Share

How to Remove the Airbag on a Kia K3?

Wear fire-resistant gloves and protective goggles. Remove the covers on both sides of the steering wheel and unscrew the 4 fixing bolts on both sides. Carefully remove the airbag assembly, use a small flat-head screwdriver to push the black plastic locking piece outward, then remove the generator-sensor from the steering wheel interface. Mark the relative position between the steering wheel and the steering column, then remove the steering wheel fixing nut, take out the nut and flat washer, and finally remove the steering wheel.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.