What is the appropriate tire pressure for a Mazda CX-5?

2 Answers
LaBrandon
07/28/25 10:58pm
The recommended tire pressure for the Mazda CX-5 ranges from 2.4 to 2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Mazda CX-5 does not display specific tire pressure monitoring values but is equipped with a tire pressure monitoring function. The tires have built-in tire pressure sensors, and when abnormal tire pressure is detected, a warning light will illuminate on the dashboard. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a tire pressure below 2.0 bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates uneven wear of the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of the cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, the tires need to be checked and the pressure adjusted. Tire pressure monitoring not reset: After inflating the tires, the tire pressure monitoring system was not reset in time, causing it to retain the previous data, which triggers the warning light. Simply reset the tire pressure monitoring to resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the tire inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. In such cases, the only solution is to replace the sensor with a new one.
Was this review help?
2
0
Share
Karl
08/12/25 3:24am
As a loyal owner of the Mazda CX-5, I've been driving this car for two years and always pay close attention to tire pressure details. The small label on the door frame recommends maintaining tire pressure around 33 PSI, and I usually keep it between 32 and 35, which feels particularly stable when driving. If the tire pressure is too low, you'll notice the steering wheel becomes heavier and fuel consumption increases significantly; if it's too high, the car rides more roughly, accelerates wear on the center of the tires, and becomes more prone to slipping in rain or snow. I recommend investing in a good digital tire pressure gauge and checking every month or two, especially during seasons with large temperature variations, as thermal expansion and contraction can alter tire pressure values. By the way, when going on long trips with a full load of luggage or passengers, adjusting to 35 PSI is safer to avoid tire damage. Remembering these small details can enhance safety and extend tire lifespan.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What does Lavida 280tsi mean?

Lavida 280tsi represents the engine power level of the vehicle. The number 280 indicates that the car's torque is 280 Nm, while TSI stands for Twincharged Stratified Injection technology, where T represents Twincharging, S stands for Stratified, and I denotes Injection. Generally, the higher this value, the better. The Lavida 280 is a compact car with body dimensions of 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm. In terms of power, the Lavida 280's 1.4-liter turbocharged engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5000 rpm and the maximum torque available between 1750 to 3000 rpm.
11
3
Share

Is Rolls-Royce a Sports Car?

Rolls-Royce does have sports cars in its lineup, with the Wraith and Dawn being two of them. Here are more details: 1. Rolls-Royce Wraith: The Rolls-Royce Wraith is a two-door sports car powered by a 6.6-liter twin-turbocharged engine. This engine, codenamed n74b66a, delivers a maximum power of 465 kW and a peak torque of 820 Nm. It reaches its maximum power at 5,600 rpm and peak torque between 1,500 and 5,500 rpm. The engine features direct fuel injection and an aluminum cylinder head and block. It is paired with an 8-speed automatic transmission. The car uses a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. 2. Rolls-Royce Dawn: The Dawn is a two-door, four-seat convertible sports car. It comes with two engine options: a high-power version and a low-power version, both 6.6-liter twin-turbocharged engines. The low-power variant produces 420 kW of maximum power and 820 Nm of torque, achieving peak power at 5,000 rpm and peak torque at 1,600 rpm. The high-power version generates 442 kW and 840 Nm, with maximum power at 5,250 rpm and peak torque at 1,650 rpm. Both engines feature direct fuel injection and aluminum cylinder heads and blocks. The suspension setup of the Dawn is identical to that of the Wraith.
5
2
Share

What Transmission Does the Langdong Use?

The Langdong is equipped with a 6-speed manual transmission and a 6-speed automatic manual transmission. The currently available Hyundai Langdong is powered by a 1.6L naturally aspirated engine. In terms of exterior design, the Langdong features a mesh-style front grille. Although the area is not large, the simple style gives it a more sporty appearance. The dimensions of the Langdong are 4570mm in length, 1775mm in width, and 1445mm in height, with a wheelbase of 2700mm. The front face of the Langdong still retains the typical family look, with fewer sharp lines but more fullness, making it appear more harmonious and balanced. Additionally, the designer has given the car's grille a full chrome treatment to make it look more stylish and upscale.
15
2
Share

What model of engine oil is used in the Hyundai Elantra?

Hyundai Elantra uses 5W30 engine oil. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties; additives can compensate for and improve the shortcomings of the base oil's performance, giving it certain new properties, making them an important part of lubricating oil. The Hyundai Elantra is a global model of Hyundai that was first launched overseas. The car has a length, width, and height of 4570 mm, 1775 mm, and 1445 mm respectively, with a wheelbase of 2700 mm. In terms of appearance, the Hyundai Elantra still features the typical family face, with lines that are less sharp but more full, making it look more harmonious and moderate. The intake grille is treated with full chrome plating, making it look more fashionable and high-end.
9
5
Share

Where to Add Transmission Fluid for the Langdong?

Langdong transmission fluid is added through the screw removal point. Lift the vehicle and you'll find only one screw on the transmission oil pan, which serves as both the filling hole and the draining hole. Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. The Langdong is a model under Beijing Hyundai, with dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, and a wheelbase of 2700mm. In terms of power, this vehicle is equipped with either a 1.6L naturally aspirated engine or a 1.8L naturally aspirated engine.
5
1
Share

What are the consequences of a broken car timing belt?

Here are the impacts of a broken car timing belt: 1. A broken timing belt will cause loss of power in the car. 2. Weak acceleration and unstable idle speed. 3. Abnormal noises from the engine. When the timing belt breaks, due to inertia, the crankshaft continues to drive the pistons up and down, while the valves remain stationary as the camshaft stops rotating. This results in bent valve stems and dented piston tops. In severe cases, the engine may require major repairs or even be completely scrapped. Additional information: Generally, vehicles need to replace the timing belt after driving 30,000 to 80,000 kilometers. If the timing belt shows signs of hardening, wear, fiber breakage, cracks, or fissures, it indicates that the belt is damaged and should no longer be used.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.