What is the appropriate tire pressure for a Cayenne?

1 Answers
KiraLee
07/30/25 4:22am
The standard tire pressure for a Cayenne is around 2.5 bar. In hot weather, it can be slightly lower than 2.5, while in cold weather, it can be slightly higher than 2.5. Cool tire pressure: measured after the vehicle has been parked for at least three hours or the tires have traveled no more than 2 kilometers. It is recommended to inflate the tires with nitrogen, as nitrogen inflation offers the following benefits: 1. Nitrogen is an inert gas that does not oxidize the tires or corrode the rims, thereby extending the service life of both the tires and rims; 2. It helps maintain stable tire pressure over the long term; 3. Reduces the risk of tire blowouts and enhances safety; 4. Decreases rolling resistance, reduces fuel consumption, and minimizes wear; 5. Low sound transmission rate, resulting in reduced noise.
Was this review help?
4
1
Share
More Forum Discussions

What brand is Glede tire?

Glede is a Fangxing tire, produced by Dongying Fangxing Rubber Co., Ltd., with its headquarters located in Guangrao County, Dongying City, Shandong Province. Tires of any brand require timely maintenance and care. The basic maintenance operation for tires involves regular inspection and adjustment of tire pressure, along with checking the overall condition of the tires. Tire inspection includes measuring the remaining tread depth, checking for any cracks in the rubber, and identifying abnormal wear on the tread. When necessary, tire dynamic balancing adjustments can also be performed. These maintenance measures effectively ensure driving safety and extend the service life of the tires.
15
3
Share

Where is the fuel tank cap switch on the Cruze?

The fuel tank cap switch on the Cruze is located on the right side, which is the direction of the passenger seat. To open the fuel tank cap, first turn off the engine, then approach the fuel tank cap. Press the rear part of the fuel tank cap, which is the side facing the rear of the car, with a gentle push. If it doesn't open, try pressing a few more times. If the fuel tank cap is damaged, you can use the emergency manual switch located on the right side of the trunk to open it. The Chevrolet Cruze is a compact car designed by General Motors to set benchmarks in design and performance. In terms of body dimensions, the Chevrolet Cruze measures 4666mm in length, 1807mm in width, and 1460mm in height.
6
1
Share

What Causes Jerking During Low-Speed Acceleration?

Jerking during low-speed acceleration is caused by the engine. The engine's ignition, air intake, and fuel injectors collectively determine fuel combustion, which is also the power source of the engine. If the air intake decreases, ignition weakens, or fuel injection reduces, the power output becomes insufficient, resulting in a jerking sensation. Jerking during the initial acceleration of an automatic transmission vehicle is normal. If you want to accelerate quickly while driving, you need to press the accelerator pedal deeply. At this point, the automatic transmission will downshift to increase the engine speed. When the speed reaches a certain level, the transmission will upshift. After upshifting, there will be a noticeable drop in engine speed, leading to a relatively obvious jerking sensation.
2
0
Share

Which company produces Hanteng?

Hanteng is produced by Hanteng Automobile Co., Ltd., located in Shangrao Economic and Technological Development Zone, Jiangxi Province. It is a new private vehicle manufacturing enterprise focusing on the R&D, production, and sales of traditional power vehicles, new energy vehicles, and key automotive components. Hanteng's product lineup includes models such as the Hanteng X7 and Hanteng PHEV. The Hanteng X7 is the first model launched by Hanteng Automobile, positioned as a compact SUV. In terms of powertrain, the Hanteng X7 offers two turbocharged engine options: a 1.5T and a 2.0T, paired with a 5-speed manual transmission and a 6-speed dual-clutch transmission respectively. The 1.5T engine delivers a maximum power of 109.8 kW and a peak torque of 215 Nm, while the 2.0T engine produces a maximum power of 140 kW and a peak torque of 250 Nm.
9
0
Share

Why is the dash cam not recording?

Possible reasons why the dash cam is not recording: 1. Motion detection is enabled: If motion detection is turned on, the dash cam will not record when the scene is static. Try disabling this feature. 2. Memory card issues: The memory card may have insufficient speed, encounter errors while saving video files, or have other inherent problems. It is recommended to reset the dash cam to its factory settings. 3. Loop recording is disabled: Loop recording divides videos into segments of a certain duration and saves them to the memory card. Once the memory card is full, the oldest video segments are automatically deleted. If this feature is turned off, videos will not be automatically deleted and will continue to fill up the dash cam's storage, eventually causing it to stop recording. Enable loop recording and set the duration to 3 or 5 minutes to resolve this issue.
8
5
Share

How to adjust the date on Nissan Teana?

Nissan Teana date adjustment method: After turning on, the CLK button displays and sets the time. Press and hold CLK for about 5 seconds until the time display flashes on the screen. Use the adjustment buttons (left turn decreases, right turn increases) to set the time, then press CLK again to confirm. The Nissan Teana is a flagship mid-to-high-end luxury sedan under the NISSAN brand, built on Nissan's FFL platform. It features a MacPherson strut front suspension system and a newly designed multi-link rear suspension. In terms of body dimensions, the Teana measures 4850mm in length, 1795mm in width, and 1475mm in height.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.