What is the appropriate tire pressure?

2 Answers
DiWilliam
07/24/25 6:58am
There are two scenarios for appropriate car tire pressure: 1. The front tire pressure should be 2.2 to 2.3 bar when unloaded and 2.4 to 2.5 bar when fully loaded. 2. The rear tire pressure should be 2.4 to 2.5 bar when unloaded and 2.6 to 2.8 bar when fully loaded. The recommended tire pressure range may vary depending on the tire model, and the standard tire pressure is usually indicated by the manufacturer at the time of production. Tire pressure can also be affected by temperature changes. In high temperatures or during summer, it is advisable to reduce the tire pressure by 0.1 to 0.2 bar. Conversely, in extremely low temperatures, such as during winter, it is recommended to increase the tire pressure by 0.1 to 0.2 bar.
Was this review help?
12
3
Share
PaigeAnn
08/11/25 2:45am
I think tire pressure is quite important. The reference values are usually found on the label inside the door frame or in the owner's manual. For small cars, it's typically around 30-35 PSI, while SUVs may require a slightly higher pressure of 35-40. If the pressure is too high, the tire's grip decreases, making the ride bumpy, and it can also lead to excessive wear in the center. On the other hand, if the pressure is too low, fuel consumption increases and there's a risk of a blowout. I make it a habit to check the pressure once a month using a home pressure gauge when the tires are cold for the most accurate reading. Temperature changes can significantly affect tire pressure. In summer, prolonged downhill driving can cause heat expansion and overpressure, while in winter, cold contraction may lead to lower pressure, so remember to adjust it when seasons change. Maintaining the correct tire pressure not only ensures safety and fuel efficiency but also extends tire life. Don't overlook this small detail, as driving hazards often stem from negligence.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How to Use the Headlight Switch in Volkswagen Cars?

Introduction to using the headlight switch in Volkswagen cars: On the left side of the dashboard, there is a rotary switch which is the headlight switch for Volkswagen cars. Turning it one notch activates the parking lights, and another notch turns on the headlights. When the headlights or parking lights are on, pulling the switch out one notch activates the front fog lights, and pulling it out another notch turns on both front and rear fog lights simultaneously. Below is an introduction to the classification of car lights: 1. Headlights, combined headlights located at the front of the car, primarily serve the purpose of illumination and signaling. The light emitted by the headlights illuminates the road ahead, enabling the driver to drive safely at night; 2. Combined taillights, located at the rear of the car, mainly serve the purpose of illumination and signaling; 3. Turn signals, used to indicate left or right turns to other road users. Regulations require them to be amber in color; 4. License plate lights, primarily used to illuminate the license plate, allowing people to identify the vehicle's license plate at night.
9
4
Share

Should I Service My Car When the Date is Due but the Mileage Hasn't Been Reached?

Yes, you should service your car when the date is due even if the mileage hasn't been reached. Car maintenance cycles are determined by two criteria: time and mileage, whichever comes first. Car maintenance, also known as vehicle upkeep, refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car. Here are some details about car maintenance: 1. Car maintenance mainly includes servicing the engine system, transmission system, air conditioning system, etc. The purpose is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, and extend the service life. 2. Minor maintenance generally refers to the routine maintenance items performed at the manufacturer's specified time or mileage to ensure vehicle performance. It mainly includes changing the engine oil and oil filter. 3. Major maintenance refers to the routine maintenance performed at the manufacturer's specified time or mileage, which includes changing the engine oil, oil filter, air filter, and fuel filter.
12
0
Share

Can the headlight cover be replaced?

The headlight cover can be replaced. Here is a tutorial on how to replace the car headlight cover: 1. Remove the headlight assembly. The headlight assembly is usually secured with clips or screws. After removing the clips or screws, the headlight can be taken off. Be careful to protect the wiring harness on the headlight during removal. 2. Use a heat gun to warm the area around the cover to soften the adhesive, then gently pry off the cover. If a heat gun is not available, a high-power hair dryer can be used, or the cover can be soaked in hot water. 3. Remove the headlight cover, clean out the old adhesive from the groove, apply new sealant, place the new cover, press it firmly, and wipe off any excess sealant. 4. After the sealant dries, reinstall the headlight assembly. Additional information on car headlight covers: If the headlight cover is cracked, it should be replaced promptly. Failure to do so can compromise the seal of the headlight, leading to moisture inside the headlight, which can affect lighting performance. Water ingress during rainy conditions may cause a short circuit, damaging the headlight.
13
5
Share

What does the yellow exclamation mark on the right dashboard of a Volkswagen mean?

When a yellow exclamation mark appears on the car dashboard, there are four possible scenarios: general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Faults: A triangle with an exclamation mark inside indicates that the car's general performance or components and functions have malfunctioned. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that the transmission has a fault or the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Abnormal Tire Pressure: A horizontal line under a bracket with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling that a car light has malfunctioned. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem. There is also a red exclamation mark inside a circle with parentheses, which represents a warning for the braking system. This mainly indicates a braking system malfunction or low brake fluid level. The braking system should be inspected immediately to avoid accidents.
16
1
Share

What does turbocharging in cars mean?

Turbocharging, abbreviated as Turbo, is indicated by the presence of 'Turbo' or 'T' on the rear of a car, signifying that the vehicle is equipped with a turbocharged engine. A turbocharger is essentially an air compressor that increases the intake air volume by compressing air. It utilizes the inertial force of the exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller then compresses the air delivered through the air filter pipeline, pressurizing it before it enters the cylinders. The following points should be noted during use: 1. Do not drive immediately after starting: After starting the engine, allow it to idle for a period to ensure that the lubricating oil fully lubricates the bearings before the turbocharger rotor operates at high speed. Avoid revving the engine aggressively right after starting to prevent damage to the turbocharger oil seal. 2. Do not shut off the engine immediately: After prolonged high-speed operation, the engine should not be turned off immediately. During operation, part of the engine oil is supplied to the turbocharger rotor bearings for lubrication and cooling. If the engine is suddenly stopped while running, the oil pressure drops rapidly to zero, and the high temperature from the turbocharger turbine transfers to the middle, while the heat in the bearing support housing cannot dissipate quickly. Meanwhile, the turbocharger rotor continues to spin at high speed due to inertia. Therefore, after heavy or prolonged operation, the engine should idle before shutting off. 3. Reduce RPM before shutting off: Allow the turbocharger rotor speed to decrease before turning off the engine. Special care should be taken to avoid shutting off the engine suddenly after revving it aggressively. 4. Regular cleaning: Since the turbocharger often operates at high temperatures, the lubricating oil lines are prone to coking due to the heat. Regular cleaning is necessary.
3
5
Share

Which car has a logo resembling a fork?

The car with a logo resembling a fork is Maserati, whose models include: Levante, GranCabrio, GranCabrio Sport, GranCabrio MC, and Ghibli. Taking the Maserati 2021 Ghibli Trofeo as an example, its body dimensions are: length 4974mm, width 1945mm, height 1484mm, wheelbase 2998mm, and fuel tank capacity 80L. The Maserati 2021 Ghibli Trofeo is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum horsepower of 330ps, maximum power of 243kw, and maximum power speed of 5750 rpm.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.