
Tire inflation pressure is generally appropriate between 2.3 to 2.5 bar, which is the standard tire pressure range. If the vehicle frequently carries many passengers, the tire inflation pressure can be increased to 2.5 bar. The hazards of incorrect tire pressure are as follows: Low tire pressure can easily damage the wheels: Tires are an important component of vehicle wheels, consisting of the tire surface and internal steel rim. If the tire pressure is too low, it can directly lead to a flat tire. If the driver continues to drive under such conditions, it can cause direct damage to the internal steel rim of the tire. High tire pressure can easily lead to tire blowouts: If the tire pressure is too high and the vehicle is overloaded with passengers or heavy cargo, it can directly cause a tire blowout during driving. Additionally, during summer when temperatures rise, excessively high pressure can also easily lead to tire blowouts. Therefore, it is essential to maintain the tire pressure at an appropriate level. Incorrect tire pressure can lead to safety accidents: Tire pressure should not be too low or too high, as both extremes can cause tire damage. Once the tire is damaged, it is highly likely to result in a safety accident.

I always check my tire pressure when driving myself, believing safety is the top priority. If the pressure is too low, the tires can overheat and deform, making a blowout very dangerous, especially during high-speed driving or long trips. If the pressure is too high, the ride becomes uncomfortable, with excessive bouncing, and uneven wear is more likely. The standard values are usually found on the label inside the door frame or in the owner's manual, with most cars ranging around 28 to 32 psi. Remember to check when the tires are cold—meaning after the car has been parked overnight—for more accurate readings. I make it a habit to use a portable tire pressure gauge once a month; it's quick and easy. Additionally, tire pressure varies significantly with the seasons—slightly higher in winter and lower in summer—but the difference should not exceed 5 psi. Neglecting this detail could lead to accidents, so developing a regular checking routine is essential.

From a cost-saving perspective, tire pressure significantly impacts fuel consumption and lifespan. I've observed that for every 10% decrease in pressure, fuel consumption increases by about 2%. Over time, this can save a considerable amount on fuel costs. Underinflation also accelerates tire wear, potentially leading to premature replacement and additional expenses. Recommended pressure can be found on the door sticker, typically between 28-32 psi, or in the new car manual. Purchasing a tire pressure gauge to check monthly is economical. Don't just focus on the average; ensure all four tires are balanced to avoid uneven wear and greater losses. Tires are consumables, and maintaining proper pressure extends their lifespan, with around 30 psi being ideal. Also, be mindful of temperature effects—avoid setting pressure too high in hot weather to save costs while ensuring performance.

I usually drive for convenience, and managing tire pressure is simple. Before driving, quickly check the label on the door frame; the pressure value is indicated, and for most cars, 28 to 32 psi is sufficient. Keep a portable tire pressure gauge handy and measure it once a month—it only takes a minute or two. If the pressure is too low, the car feels sluggish; if it's too high, the ride becomes bumpy. Adjusting it to the right level ensures a smooth drive. Pay attention to seasonal changes—inflate slightly more in winter to prevent pressure drops and reduce a bit in summer to avoid overheating. Once you develop the habit, safety improves, and you won’t need to spend extra money at the repair shop frequently.


