What is the appropriate temperature inside a car?

2 Answers
StJulianna
07/24/25 5:11am
The appropriate temperature inside a car is between 20°C and 27°C. If it exceeds 28°C, people will feel hot, and if it drops below 14°C, people will feel cold. It is necessary to regularly switch between the internal and external air circulation modes in the car. If the car remains in internal air circulation mode for a long time, the oxygen level inside the car will gradually decrease, and carbon monoxide produced by the engine may accumulate inside, which can easily lead to poisoning. Regularly activating the external air circulation mode can bring fresh air into the car. In summer, a car parked under the scorching sun may reach temperatures as high as 60-70°C inside. In such cases, it is advisable to first open the doors and windows, wait for two to three minutes to let the hot air escape before entering and starting the car. Do not close the windows immediately; instead, turn on the external air circulation of the air conditioner first. Once the temperature inside and outside the car becomes similar, you can then close the windows and switch to internal air circulation.
Was this review help?
7
0
Share
StLucia
08/11/25 12:51am
I find maintaining the car interior temperature around 22°C most comfortable - neither too high nor too low, preventing sweating from heat or shivering from cold while driving. As a frequent commuter, I've observed this temperature helps maintain focus and avoid fatigued driving. In summer, higher temperatures induce drowsiness, while winter's lower settings cause shivering, both impairing reaction times. Additionally, set fan speed to moderate, preferably in auto mode, coupled with air recirculation to minimize external pollutant intake. Humidity control matters too - increase ventilation when too dry, activate AC dehumidification when too damp. Remember, temperature preferences vary - elderly and children may need slightly higher settings, but generally 20-23°C is safe. Make seasonal micro-adjustments: maintain 22°C in spring/autumn, shift toward 21°C or 23°C in winter/summer to optimize AC efficiency and reduce fuel consumption.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

Where to Check the Tire Pressure Monitoring in the Tayron?

The tire pressure monitoring in the Tayron can be viewed on the car's dashboard. The tire pressure monitoring system can automatically monitor various conditions of the tires in real-time by recording the rotation speed of the tires or through electronic sensors installed in the tires, providing effective safety protection for driving. Taking the 2020 Tayron as an example, its body dimensions are: length 4589 mm, width 1860 mm, height 1660 mm, with a wheelbase of 2731 mm and a fuel tank capacity of 60 liters. The 2020 Tayron is equipped with a 1.4T turbocharged inline 4-cylinder engine, with a maximum power of 110 kW and a maximum power speed of 5000 to 6000 rpm. It uses a McPherson type independent suspension for the front suspension and a multi-link independent suspension for the rear suspension.
15
4
Share

What does the BMW M package mean?

BMW M package refers to the modification and upgrade of the car, specifically including: sport rims, wide tires, high-brightness exhaust pipes, sport body kits, reinforced suspension, enhanced brake pads and discs, and external M-series sport logos. Taking the 2020 BMW M2 as an example, its body dimensions are: length 4476 mm, width 1854 mm, height 1423 mm, wheelbase 2693 mm, and fuel tank capacity is 52 liters. The 2020 BMW M2 is equipped with a 3.0L twin-turbocharged engine, with a maximum power of 302 kW, and the maximum power speed is 5230 to 7000 rpm. The front suspension type is a double-ball-joint spring strut front axle, and the rear suspension type is a multi-link independent suspension.
9
1
Share

How to reset the tire pressure indicator light on the Bora?

The method to reset the tire pressure indicator light on the Bora is: 1. Press and hold the right-hand zero reset button on the instrument panel while turning on the ignition; 2. Release the zero reset button once the maintenance light enters the reset mode; 3. Press the left-hand menu button to confirm. The Bora's body dimensions are: length 4663 mm, width 1815 mm, height 1462 mm, wheelbase 2688 mm, fuel tank capacity 50 liters, trunk capacity 506 liters, and curb weight 1320 kg. The 2021 Bora is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116 PS and a maximum power of 85 kW, paired with a 7-speed dual-clutch transmission.
4
4
Share

Where is the car fire extinguisher placed?

The car fire extinguisher is placed in: 1. the glove box inside the car; 2. next to the seat; 3. the trunk. The storage environment temperature of the car fire extinguisher should be within the range of -10 to 45 degrees Celsius, and the place where it is placed should be kept dry and ventilated to prevent the fire extinguisher from getting damp and corroding. Precautions for using the car fire extinguisher: 1. Do not cover the fire extinguisher with items, it should be within easy reach for quick access; 2. Check the pressure of the fire extinguisher once a month; 3. Use the fire extinguisher correctly; 4. The fire extinguisher can only be used to put out primary fires; 5. The fire extinguisher has an expiration date, so it should be configured and replaced as required.
1
3
Share

What to Do If You Paid the Fine Twice for One Traffic Violation?

After paying the fine twice for one traffic violation, you can take both payment receipts to the manual service window of the traffic police department to apply for a refund. The following is an introduction to the violation codes: 1. Overview: The traffic violation code table includes 337 types of violations, categorized as follows: 175 for motor vehicle traffic, 55 for non-motor vehicle traffic, 30 for pedestrians and passengers, 28 for highway traffic, and 49 for other regulations. 2. Composition: Traffic violation codes consist of four digits, classified according to the principles in the traffic law. The sequence from left to right is: one digit for the behavior classification code, one digit for the penalty point classification code, and the last two digits are the sequential number code.
12
3
Share

What are the classifications of clutch operating mechanisms?

The classifications of clutch operating mechanisms are: 1. Mechanical operating mechanism; 2. Hydraulic operating mechanism; 3. Pneumatic-assisted hydraulic operating mechanism. The functions of an automotive clutch are: 1. Ensuring smooth vehicle starting; 2. Facilitating gear shifting; 3. Preventing overload of the transmission system; 4. Reducing torsional vibration impact. The maintenance methods for the clutch master cylinder are: 1. Inject hydraulic oil into the cylinder; 2. Loosen the bleeder bolt and push the piston to allow air inside the cylinder to escape; 3. Tighten the bleeder bolt. The working principle of an automotive clutch is that the torque generated by the engine is transmitted to the driven plate through the friction between the flywheel, pressure plate, and the contact surface of the driven plate. When the driver depresses the clutch pedal, the diaphragm spring's large end moves the pressure plate backward via mechanical transmission, causing the driven part to separate from the driving part.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.