What is the appropriate size for a USB drive in the Baojun 310?

1 Answers
DelClara
07/30/25 10:47am
Baojun 310 USB drive 64g is appropriate. The following is an introduction to the car USB interface: 1. Main functions: Use the standard power supply in the car to charge electrical appliances with USB as the interface, or as a fixed power interface for electrical appliances. 2. Advantages of car USB interface: It is a car transmission line, with the advantages of fast transmission speed, convenient use, support for hot plugging, flexible connection, and independent power supply. It is generally a universal interface for plugging USB devices such as USB drives and MP3. Precautions for using USB interface: 1. It can only be used after the engine is started: You must charge when the car engine is started to avoid burning the electrical appliances due to unstable car power supply. 2. Do not use in a humid environment: It is easy to cause short circuit of electrical appliances and damage to the USB interface.
Was this review help?
10
1
Share
More Forum Discussions

What are the penalties for not wearing seat belts in the back seat?

Generally, not wearing seat belts in the back seat will not be penalized, but there are exceptions in certain cities, such as Shenzhen. When a motor vehicle is in motion, the driver and passengers must use seat belts as required, and motorcycle drivers and passengers must wear safety helmets as required.
12
1
Share

How to Remove Residual Crystal Coating?

Use a damp towel to wipe; moistening it with warm water yields better results. Applying polishing wax is highly effective for removal. Using tar remover provides similar effectiveness as removing tar stains. Automotive crystal coating transforms the paint surface into a continuous layer through traditional polishing techniques, increasing the overall density of the paint surface.
4
4
Share

How to Open the Lexus Hood?

Located at the lower left corner of the driver's seat, lift the hood, remove the engine compartment cover support rod, and hang the engine compartment cover support rod into the groove of the engine compartment cover. Located on the left panel of the center console, reach into the front end of the engine compartment cover and lift the cover upwards; take out the cover support rod and place one end of the support rod into the slot.
1
2
Share

How to Start in Second Gear Without Stalling?

After starting the car in neutral, quickly press the clutch pedal and shift into first gear. Then slowly release the clutch pedal until you feel the vehicle begin to move forward. Once you feel the wheels moving, hold the clutch steady and gently press the accelerator. Do not release the clutch too quickly, or the car will jerk.
9
0
Share

How to Connect Jumper Cables?

Open the engine hood and locate the battery. Connect one end of the red jumper cable to the positive terminal of the working vehicle's battery. Connect one end of the black jumper cable to the negative terminal of the working vehicle's battery, and the other end to an unpainted metal part of the engine on the dead vehicle. Start the working vehicle, then attempt to start the dead vehicle.
9
3
Share

What to Do If Walnut Shell Grit Enters the Combustion Chamber?

Clean the throttle body by removing it, using carburetor cleaner for cleaning, and then drying it with a cotton cloth before reinstalling. To clean internal engine carbon deposits, open the oil cap, pour in the entire can of cleaner, let the engine idle for 10-15 minutes, and then turn it off. Cleaning carbon deposits in the fuel system includes cleaning the fuel injectors, combustion chamber, spark plugs, and other components.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.