What is the appropriate range for tire pressure?

2 Answers
MacGarrett
07/25/25 3:59pm
Tire pressure is generally appropriate around 2.2 to 2.5 bar, slightly lower in summer and relatively higher in winter. Additionally, since the front wheels bear the engine's weight long-term, their pressure should be about 0.1 bar higher than the rear wheels. Spare tires, which are rarely used, should maintain higher pressure to avoid losing their emergency function due to low pressure; typically, it should be above 2.5 bar, adjusted to the proper level when in use, and reinflated to high pressure afterward. Cold and hot tires have different pressures, with a difference of about 0.2 bar, so measurement should be noted accordingly. To determine the optimal tire pressure, refer to the data provided by the vehicle manufacturer, as it is derived from comprehensive considerations and is highly suitable.
Was this review help?
2
4
Share
DeMartin
08/11/25 9:39pm
What is the appropriate tire pressure range? I think it depends on your vehicle type and daily usage. I've been driving a sedan for many years and always follow the recommendation on the door pillar sticker, keeping it around 32 to 35 PSI, which is quite universal and suitable for sedans. For SUVs or pickup trucks, it should be higher, around 35 to 40 PSI, and can be adjusted even higher when carrying heavy loads. I make it a habit to check the pressure with the free gauge at the gas station every time I refuel, especially when the tires are cold—that means measuring after the car has been parked for several hours. Too low pressure increases the risk of a blowout and causes uneven wear, while too high pressure affects comfort, making the ride bumpy. Regular checks also save fuel and extend tire life. Don't underestimate this small detail—it really impacts driving safety.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Can the antenna of Volkswagen Polo be removed?

Volkswagen Polo's antenna can be removed. Radio Antenna: The radio antenna is used to receive or enhance signal reception. In remote areas with unstable signals, the role of the antenna becomes evident. GPS Antenna: The GPS antenna is usually a small black block, attached to areas such as the car's dashboard. Some car models even use printed metal traces as antennas, hidden behind the rear windshield, side windshield, or front windshield. However, due to the limited surface area of the antenna design, built-in antennas often have slightly lower sensitivity compared to external antennas. Although cars with built-in antennas may perform slightly worse in signal reception compared to those with external antennas, in terms of visual appeal and certain safety and anti-theft features, built-in antennas have the upper hand.
7
2
Share

Where is the rear towing hook located on the Buick Excelle?

Buick Excelle rear towing hook is located at the lower left corner of the rear bumper. The era connotation of Buick Excelle: Perfectly interprets the innate spirited temperament, sharp and tough lines, and driving experience; it also reflects the "talent and wisdom" and the "daring to think and act, decisive and straightforward work style" of the new generation of striving youth. Power configuration of Buick Excelle: Equipped with a 1.6T turbocharged engine, it can unleash a maximum power of 135kW, with a power-to-displacement ratio of 84.4kW/L, featuring super torque, and continuously delivers a maximum torque of 235Nm within an ultra-wide speed range of 1980-5400rpm.
17
4
Share

What happens when the clutch pressure plate of a Volkswagen Santana fails?

The clutch pressure plate of a Volkswagen Santana fails, the clutch disc will experience slipping. Specific symptoms: A portion of the engine's output power will be wasted, and the car may also experience insufficient power. Once the pressure plate is damaged, it needs to be replaced immediately; otherwise, it will affect the normal operation of the vehicle. Clutch disc: The clutch is part of the car's transmission system. When the clutch pedal is depressed, the clutch disengages. When the clutch pedal is released, the clutch engages. The clutch is mounted on the engine flywheel, with the clutch pressure plate fixed to the flywheel. Between the flywheel and the pressure plate is the clutch disc. The clutch disc has splines in the center, which secure a transmission shaft. This transmission shaft is the power input shaft of the gearbox.
3
2
Share

What is the fuel consumption of the Sagitar?

Sagitar fuel consumption ranges from 5.6L to 9.6L. Driving at low speeds without using air conditioning: Minimize the use of air conditioning, especially during traffic jams or when idling; whenever the temperature is moderate, try to utilize the car's ventilation system and fans, or open windows instead of using air conditioning; when air conditioning is necessary, set it to an appropriate temperature, avoiding extremes, and keep the air circulation system on the recirculation mode. You can temporarily turn off the air conditioning once the interior temperature is comfortable. Regularly clean the trunk: Unnecessary items increase the car's weight, which in turn increases fuel consumption. To save fuel, car owners should avoid being lazy or messy and remember to clean the trunk frequently, removing all useless items.
5
3
Share

What Systems Make Up an Engine?

An engine consists of two major mechanisms and five systems, namely the crank-connecting rod mechanism, valve train, fuel supply system, lubrication system, cooling system, ignition system, and starting system. The crank-connecting rod mechanism is the main moving component that enables the engine to complete its working cycle and achieve energy conversion. It is composed of the cylinder block group, piston-connecting rod group, and crankshaft-flywheel group. The function of the valve train is to open and close the intake and exhaust valves according to the engine's working sequence and process, allowing the combustible mixture or air to enter the cylinder and exhaust gases to be expelled from the cylinder, thereby achieving the gas exchange process. An engine is a machine capable of converting other forms of energy into mechanical energy. It can refer to either the power generation device or the entire machine including the power unit.
6
0
Share

Why Does the BMW Body Shake When Pressing the Accelerator While Stationary?

BMW body shaking when pressing the accelerator while stationary may be caused by engine mechanical failure, engine management system failure, or fuel supply system failure. Engine Mechanical Failure: Such as uneven cylinder pressure in each cylinder; intake system failure: such as excessive dirt inside the intake pipe, etc. Engine Management System Failure: Such as incorrect coolant temperature or intake air temperature signals, wiring faults, etc.; ignition system faults: such as excessive spark plug carbon buildup or incorrect gap, high-voltage wire or distributor cap leakage, damaged ignition coil, etc. Fuel Supply System Failure: Such as injector nozzle not sealing properly or clogging due to excessive internal carbon buildup in the fuel injector, etc.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.