What is the appropriate mileage for the first maintenance?

1 Answers
JaceRose
07/30/25 12:52am
5000 kilometers is the appropriate mileage for the first maintenance. The first maintenance for a new car should be done either after six months or upon reaching 5000 kilometers. From the time a new car leaves the factory until it is delivered to the owner, there is always a period of time involved. Therefore, the oil change cycle should be calculated based on the factory date. Although new cars undergo pre-break-in, the engine may still shed some metal particles that were not completely worn off during initial use, which can affect the lifespan of the engine oil. Owners should perform maintenance at six months or 5000 kilometers, whichever comes first. Routine maintenance items include replacing the oil filter and air filter, which are beneficial for the vehicle.
Was this review help?
6
4
Share
More Forum Discussions

Does Applying a Matte Car Wrap Require Registration?

Applying a matte car wrap requires registration due to the significant change in appearance. Below are the details: Reasons for registration: According to current vehicle registration regulations, if the area of color change does not exceed 30% of the vehicle's surface, registration for modification is not required. However, if the color change exceeds 30%, registration at the vehicle management office is mandatory. Although a matte car wrap is not a color-changing film, its semi-transparent and semi-matte appearance significantly alters the vehicle's look, thus requiring registration. Of course, if a glossy car wrap is applied, registration is not needed. Registration considerations: When registering, you must bring the original and a copy of the vehicle owner's ID, the vehicle registration certificate, and the vehicle license. It is essential to apply the wrap first and then register—drive the matte-wrapped vehicle to the registration office. This is because the registration process involves taking on-site photos of the vehicle's altered appearance for documentation; without the wrap applied, registration cannot be completed. Registration must be completed within 10 days (note: not 10 working days) after applying the matte car wrap to obtain the new certificate.
5
5
Share

What Causes Abnormal Noise from Car Wheels?

Inaccurate four-wheel alignment of the vehicle can lead to significant tire wear during long-distance driving, resulting in uneven tire wear and abnormal noise; this phenomenon can also occur when a wheel bearing is damaged; or when stones are lodged in the tire treads or nails, glass, and other debris puncture the tire. Below is relevant information: Automotive Tires: Automotive tires are one of the essential components of a vehicle. They directly contact the road surface and, together with the vehicle's suspension, help mitigate the shocks encountered during driving, ensuring good ride comfort and smooth operation. They also ensure excellent adhesion between the wheels and the road surface, improve the vehicle's traction, braking, and off-road capabilities, and bear the vehicle's weight. The critical role tires play in automobiles is increasingly being recognized. Functions: They prevent severe vibrations and premature damage to vehicle components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure safety, handling stability, comfort, and fuel efficiency. They support the vehicle's entire weight, bear the load, and transmit forces and moments in other directions.
10
2
Share

What is the tutorial for changing transmission oil in BMW 5 Series?

BMW 5 Series transmission oil change steps are as follows: 1. First, manually remove the transmission oil pan drain plug to drain approximately 4L (collect with a measuring cup). 2. Remove the original transmission oil pan and clean the contact surface thoroughly for reinstallation. 3. After cleaning the oil stains, install the transmission oil pan. Note that the most proper way to tighten the oil pan screws is to use a torque wrench and tighten them in three stages. 4. Manually refill the transmission with nearly 4L of new transmission oil (drain how much, add how much) to ensure the proper oil level in the transmission. 5. Pour the remaining new oil into the transmission oil circulation machine, and connect the oil outlet and return pipes using the ZF 8-speed dedicated adapter. After connection, ensure that the connections are secure. Since the circulation machine operates under pressure, checking is necessary to avoid waste or accidents caused by loose pipes. If oil spills on the ground, it can easily cause slips and falls. 6. Finally, the most crucial step is to check for any oil leaks or seepage from the oil pan, and use BMW's dedicated diagnostic computer to verify that the transmission oil reaches operating temperature and measure the oil level. If no abnormalities are found, the process is complete.
15
3
Share

How to Adjust the Headlight Height of the Orlando?

The method for adjusting the headlight height of the Orlando involves using a roller switch marked with numerical gears. The numbers indicate the height level of the headlights, with higher numbers corresponding to a higher headlight position. The most suitable gear should be selected based on the actual situation of the vehicle owner, as the vehicle's load can cause variations. Below are the instructions for using the lights on the Chevrolet Orlando: 1. Turn Signals and Parking Lights: Simply rotate the knob on the light control lever to switch between different light modes, but this operation must be performed with the ignition on. 2. Instant High Beam Function (also known as high-low beam alternation): Pull the light control lever toward the driver once to alternate between high and low beams. The high beam indicator light will illuminate on the instrument panel. 3. Fog Light Activation: The rear fog light switch is located in the middle of the light knob; press it to turn on the fog lights. 4. Automatic Headlights, Low Beams, and Position Lights: Rotating the control lever to the AUTO position activates the automatic headlights. Rotating the knob sequentially will turn on the position lights, automatic headlights, and low beams in order. 5. Headlight Washer (available on certain models): With the headlights on, activating the windshield washer switch will also wash the headlights. To clean only the windshield without washing the headlights, turn off the headlights first. 6. Adaptive Headlights (available on certain models): Press the button on the light control lever to activate the adaptive headlights.
5
5
Share

What car is the Taurus?

Taurus is the Ford Taurus. Here are the specific details about the Taurus: 1. Body dimensions: The Taurus is a mid-size sedan with a length of 4996 mm, width of 1878 mm, height of 1503 mm, and a wheelbase of 2949 mm. 2. Powertrain configuration: The Taurus is equipped with three engines: a 1.5-liter turbocharged engine, a 2.0-liter turbocharged engine, and a 2.7-liter turbocharged engine. The Taurus features a MacPherson independent front suspension and a multi-link independent rear suspension. The multi-link suspension enhances the car's handling.
5
3
Share

Does the Dongfeng Honda XR-V have tire pressure monitoring?

Dongfeng Honda XR-V does not come with a tire pressure monitoring function as standard. Owners who need this feature can purchase and install it separately. Common tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data for each tire is displayed. The system will automatically alert when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the air pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between tires, the purpose of monitoring tire pressure is achieved. Indirect tire pressure alert systems actually rely on calculating the rolling radius of the tires to monitor air pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low air pressure. However, it still cannot provide real-time data of the actual pressure in all four tires like a direct system can.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.