···
Log in / Register

What is the appropriate idle speed for a small car?

1 Answers
Declan
09/06/25 5:56am

Small cars typically have a normal idle speed of 700 to 800 RPM. Below is an introduction to related content: 1. Low RPM: Low RPM can cause engine shaking, and the idle speed is relatively high during cold starts. 2. Reason: This is because working at low temperatures can cause wear on the engine. Below is extended information on the hazards of car idling: 1. Carbon buildup: If the car's idle speed is too high, check whether the intake manifold is loose or leaking, as this can significantly increase fuel consumption and lead to more carbon buildup in the engine. 2. Car idle speed too low: While driving, there is a safety risk of stalling at any time. 3. Unstable idle speed: If the car's idle speed fluctuates, it may be due to spark plugs or ignition coils not working properly, causing engine pistons to malfunction and resulting in severe shaking.

Was this review help?
6
5
Share
More Forum Discussions

What Causes Hybrid System Malfunctions?

Hybrid system malfunction issues occur when the vehicle fails to start (system ready light not illuminated), with the dashboard displaying "Hybrid System Malfunction". It is recommended to wait for 10 minutes. Refrigeration unit pipeline leakage: For units that use refrigerant, this issue is relatively common. Since Freon circulates in a nearly sealed pipeline, there should be no natural loss. If leakage occurs during Freon refilling, methods such as pressure testing should be employed for detection or immediate repair. Refrigeration unit compressor failure: Overheating of the refrigeration unit compressor can cause the protector to fail. If the unit itself is functioning properly, the compressor may already be damaged. The causes of refrigeration unit pipeline blockage include incomplete vacuum extraction or moisture-induced ice blockage.
17
1
Share

What to Do with Tire Pressure Monitoring When Changing Wheels?

For direct tire pressure monitoring systems (TPMS) when changing wheels, the pressure sensors need to be removed and reinstalled on the new wheels; indirect TPMS can have the wheels replaced directly without any impact; hybrid TPMS is similar to direct systems, requiring the corresponding components to be removed from the wheels. The functions of tire pressure monitoring are: 1. It alerts promptly in case of rapid or slow air leakage when a tire is punctured by a nail; 2. It warns to prevent blowouts when tire loosening causes uneven friction, leading to high tire temperatures reaching 70 degrees Celsius; 3. It alerts when the tire pressure is below the vehicle's set limit due to prolonged lack of inflation, preventing low pressure from causing tire temperature rise and blowouts.
1
5
Share

What is the first letter of Wuhan license plate?

Wuhan license plate's first letter is A. License plate refers to the vehicle number plate, which is respectively hung on the front and rear plates of the vehicle. The materials used are aluminum, iron sheet, plastic or paper, with the vehicle's registration number, registration area or other relevant information engraved on it. The license plate is the numbering of each vehicle, and its main function is to know the province, city, and county to which the vehicle belongs through the license plate. The vehicle management office can check the owner of the vehicle according to the license plate. The operation process of vehicle registration is: 1. Obtain the vehicle certificate; 2. Keep the triplicate invoice of the car purchase; 3. Pay the vehicle purchase tax and get the main and auxiliary tax books; 4. Register and inspect the vehicle at the vehicle management office; 5. Select the vehicle license plate number; 6. After payment, get the license plate and install it.
8
1
Share

What are the reasons for the instability of Wuling Hongguang S at high speeds?

Wuling Hongguang S is unstable at high speeds because: the car has a relatively high chassis, and more air passes under the chassis, creating turbulence beneath the chassis, which reduces stability. Taking the 2020 Wuling Hongguang S as an example, it is a microvan with body dimensions of: length 4390mm, width 1660mm, height 1750mm, a wheelbase of 2720mm, a fuel tank capacity of 50l, and a curb weight of 1185kg. The 2020 Wuling Hongguang S features a MacPherson strut front suspension and a leaf spring non-independent rear suspension. It is equipped with a 1.2L naturally aspirated engine, producing a maximum horsepower of 76ps, a maximum power of 56kw, and a maximum torque of 110nm, paired with a 5-speed manual transmission.
7
2
Share

What to Do When a Car's Exhaust Fails to Meet Standards?

The solutions for a car's exhaust failing to meet standards are: 1. Replace the spark plugs; 2. Adjust the ignition timing; 3. Clean the throttle body with a cleaning agent; 4. Switch to 97-octane gasoline or 97-octane ethanol gasoline; 5. Use an automobile exhaust purifier; 6. Clean the distributor contacts and the rotor contacts; 7. Clean the air filter; 8. Clean the three-way catalytic converter and oxygen sensor. The methods to check the vehicle's emission standard are: 1. Check the motor vehicle conformity certificate: The vehicle conformity certificate clearly states the vehicle's emission standard; 2. Look for the vehicle's packing list: Find the vehicle's emission standard in the vehicle information section; 3. Check the certificate of conformity: It indicates the corresponding emission standard; 4. Inspect the vehicle's environmental protection label: There is a clear mark on the back of the environmental protection label on the car's front windshield, indicating the vehicle's emission standard.
6
4
Share

What is the difference between front windshield defogging and rear windshield defogging?

The differences between front windshield defogging and rear windshield defogging: 1. Different defogging methods: Front windshield defogging is achieved by blowing air, and the compressor will activate when front windshield defogging is turned on; Rear windshield defogging uses heating wires for defogging. 2. Different symbols: The defogging symbol for the front windshield is fan-shaped with airflow markings inside; The defogging symbol for the rear windshield is square with airflow markings inside. Windshield fogging occurs due to a significant temperature difference between the inside and outside of the vehicle. When the outside temperature is lower than the inside temperature, the air inside the car cabin cools and forms condensation on the inner side of the windshield; When the inside temperature is lower than the outside temperature, water vapor in the atmosphere condenses on the outer side of the windshield.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.