What is the appropriate height for the car seat?

What is the content of the Motorcycle Subject 3 test?

Motorcycle test Subject 3, also known as the road test, includes the single-plank bridge, slope starting, right-angle turns, and designated parking. Below are the relevant details: Field test and road test: Data for the pole-weaving field: The distance between the pole and the sideline is the vehicle width plus 30 cm (generally, the pole is about 1 meter away from the sideline); Distance between poles: For ordinary and light two-wheel motorcycles, it is the vehicle length plus 50 cm; for regular three-wheel motorcycles, it is the vehicle length plus 40 cm; for sidecar motorcycles, it is the vehicle length plus 80 cm; the finish line is three times the vehicle length away from the last pole. Requirements: Weave through 5 poles in an S-shape with a spacing of 2.5 m, the white lines on both sides are over 1 m wide—touching the line, hitting a pole, or stalling means failure; after weaving, go around a circle and weave back; two single-plank bridges, each about 3 m long, over 10 cm wide, and about 125 px high, spaced 2 m apart front and back, one on the left and one on the right, with a 2 m lateral distance—both front and rear wheels must not fall off, and the engine must not stall; right-angle turn on a 1 m wide path, must not touch the line; undulating road surface with three cement pits about 125 px deep, must not stall; S-curve, two S-shaped paths, must not touch the line; slope starting on a roughly 30-degree slope with a white line in the middle—stop when the front wheel touches the line, then restart, requiring a single successful start without stalling and no backward movement exceeding 750 px; designated parking with a white line near the traffic officer—the front wheel must stop on the white line.

20

5

Share

What are the common causes of a starter failing to start the engine?

There are several reasons why a starter may fail to start the engine: Severe wear of starter carbon brushes: When the starter carbon brushes are severely worn, the symptom during startup is weak starting power, and the crankshaft can be clearly seen turning very slowly through the belt and pulley. If the wear is extremely severe, the starter may not be able to rotate the crankshaft at all, producing only a buzzing sound of electric current. Fault in the starter control mechanism: In addition to the starter motor, the starter assembly also includes an electromagnetic control mechanism. The function of the electromagnetic control mechanism is to push the small pinion gear installed on the starter motor rotor outward to engage with the large ring gear on the flywheel, thereby allowing the starter motor to rotate the flywheel. When the control mechanism fails, the small pinion gear cannot engage with the large ring gear, naturally preventing the engine from starting. The symptom is that when turning the key to start, only the sound of the starter spinning at high speed is heard, without the sound of the engine crankshaft and flywheel operating. Damage to the starter clutch: There is also a clutch between the starter rotor and the gear. Generally, the starter operates at a speed of 120r/min, while the engine idles at around 900r/min after starting. The role of the clutch is to prevent the engine from driving the starter after startup, which could happen if the driver does not release the key in time, causing the small pinion gear and large ring gear to remain engaged, leading to the starter burning out. After the clutch is burned out, the rotor and small pinion gear will slip relative to each other, causing the engine crankshaft and flywheel to turn very slowly or not at all.

4

0

Share

Is there a voice prompt for gear shifting in Subject 3?

There is no voice prompt for gear shifting in Subject 3. During the test, the voice system will only announce "Please complete the gear shifting project." Upon hearing this, the examinee must smoothly shift from second gear to fourth gear and then back down to second gear in sequence. There are no voice prompts during the gear shifting process, but it must be completed within a limited distance. For example, when using first and second gears, the driving distance cannot exceed 500 meters. Items in Subject 3 without voice prompts: It is understood that in Subject 3, there are no voice announcements for passing pedestrian crossings, school intersections, or public transportation stops. Examinees must apply the brakes themselves and handle these sections independently. Therefore, it is essential to remember the route clearly during the subsequent test and not rely solely on voice announcements. During the test, it is advisable to drive slowly, stay observant, and prepare in advance for entering intersections to minimize unexpected situations. Notes: Additionally, other items in Subject 3, such as vehicle preparation, starting, driving straight, changing lanes, turning left, turning right, meeting oncoming vehicles, overtaking, making a U-turn, simulating nighttime driving, and parking by the roadside, all have voice announcements. Examinees only need to complete the corresponding operations based on the prompts. However, it is worth noting that driving test requirements may vary slightly between regions, and voice announcements may differ accordingly. It is best to clarify these details with the local driving school instructor.

10

5

Share

Can the vehicle owner be absent during the annual inspection?

Annual vehicle inspection can be conducted without the owner's presence by authorizing another person to handle it. The authorized agent needs to present the proxy certification materials and relevant vehicle documents to complete the annual inspection process. The vehicle annual inspection procedure refers to the mandatory process that every motor vehicle must undergo each year, serving as a health check-up for the vehicle to promptly eliminate potential safety hazards and reduce traffic accidents. The frequency of vehicle inspections varies depending on the following circumstances: 1. For passenger transport vehicles: inspection once a year within 5 years; inspection every 6 months after exceeding 5 years; 2. For cargo vehicles and large/medium-sized non-operational passenger vehicles: inspection once a year within 10 years; inspection every 6 months after exceeding 10 years; 3. For small/mini non-operational passenger vehicles: inspection once every 2 years within 6 years; inspection once a year after exceeding 6 years; inspection every 6 months after exceeding 15 years.

19

1

Share

Can You Guarantee Passing the Driving Test by Knowing Someone at the Vehicle Management Office?

Knowing someone at the Vehicle Management Office cannot guarantee passing the driving test (Subject 3), as colluding with examiners to cheat is illegal. Below are the relevant regulations: Regulations: According to Article 88 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' applicants who conceal information or provide false materials to apply for a driving license are prohibited from reapplying within one year. If an applicant is found to have engaged in bribery or cheating during the exam, their test qualifications will be canceled, and any previously passed subjects will be invalidated. The following actions constitute a crime: Signing off on passing scores or issuing driving licenses to individuals who do not meet the requirements, have not taken the test, or have failed; reducing test items, lowering evaluation standards, or participating in, assisting, or condoning cheating; issuing learning permits or special driving practice identifiers to unqualified applicants; colluding with illegal intermediaries for financial gain.

14

3

Share

What Does Total Loss Mean?

Total loss refers to a situation where total loss is inevitable, or when the residual value of the damaged vehicle plus the costs of rescue, sorting, repair, and continued transportation to the destination exceed a certain value, it is considered a total loss. Actual total loss of vehicle: Actual total loss of a vehicle, also known as absolute total loss, refers to the loss where the damaged vehicle is completely destroyed in physical form or economic value. For example, after a severe collision that causes significant damage to the engine and the passenger compartment, the vehicle can be defined as an actual total loss. Constructive total loss: Constructive total loss refers to a situation where the insured vehicle is not completely destroyed after damage and can be repaired or recovered, but the cost involved would exceed the value of the insured vehicle after rescue, making it not worthwhile. In such cases, the insurance company abandons further efforts and compensates the insured with the full insured amount, which is considered a constructive total loss.

19

2

Share

What is the appropriate height for the car seat?

What is the content of the Motorcycle Subject 3 test?

What are the common causes of a starter failing to start the engine?

Is there a voice prompt for gear shifting in Subject 3?

Can the vehicle owner be absent during the annual inspection?

Can You Guarantee Passing the Driving Test by Knowing Someone at the Vehicle Management Office?

What Does Total Loss Mean?

Will the engine definitely be damaged if it is started a second time after water ingress?

Is it better not to replace the front fender of a car?

At What RPM Should You Release the Foot Brake During Hill Start?

Is It Serious to Jump-Start a Car with Reverse Battery Connections?