What is the app called for BMW 5 Series dash cam?

Where is the maintenance reset button for Volkswagen cars?

Volkswagen car maintenance reset buttons are the two buttons located at the lower center of the instrument panel. Hold down the left button, turn the key to the on position, and press the right button three times consecutively to reset the maintenance. Scope of maintenance: Car maintenance mainly includes a series of maintenance areas such as the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. Purpose of maintenance: The purpose of car maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.

8

3

Share

What is the difference between Comfort mode and Auto mode in Audi A4L?

Audi A4L's Comfort mode and Auto mode differ in throttle sensitivity and driving behavior. Comfort mode: Comfort mode maintains driving pleasure while minimizing fuel consumption. In this mode, the transmission shifts gears when engine speed is below 2000 rpm, achieving optimal fuel efficiency. The throttle response is less sensitive, delivering power more gradually. Even with hard acceleration, the push-back feeling is barely noticeable. Auto mode: Auto mode adjusts engine speed and gear shifts according to actual road conditions, featuring flexible steering control and higher throttle sensitivity. The throttle response becomes noticeably sharper, delivering power that's neither too gentle nor too aggressive, making it easier to control. When fully depressing the accelerator, some push-back feeling can be experienced.

16

3

Share

What is the curb weight of the Yuhu 7?

The curb weight of the Yuhu 7 is 2.89 tons. Introduction to the Yuhu 7 brand: As one of the few brands that ventured into high-end pickup trucks early on, Yuhu was established as early as 2012. Its subsequent models have been involved in various fields such as military applications, public infrastructure construction, and household use, accumulating extensive experience in vehicle manufacturing. The Jiangling Yuhu 7, as its high-end model, incorporates numerous advanced technologies and experiences, making it highly reliable. Yuhu 7 vehicle information: Its suspension adopts a rare domestic two-longitudinal and eight-transverse high-strength structure, with a maximum load capacity reaching 904 kg. Paired with a professional part-time four-wheel-drive system and the Maxxis professional off-road tires equipped outside the vehicle, it is more than capable of handling extreme off-road conditions. The configuration of the ABS+EBD system, along with the dual-tone Lear leather seats and theater-style rear seat design, provides a sedan-like comfort. Combined with the in-vehicle telematics system, large central control screen, and direct tire pressure monitoring, it offers a convenient and user-friendly experience.

5

3

Share

Can the Corolla continue to drive if the water pump makes abnormal noises?

Corolla cannot continue to drive if the water pump makes abnormal noises. If you continue driving, it will affect the water pump's operation, causing the coolant to stop circulating, which will lead to the engine overheating and potentially result in engine damage. Reasons for abnormal noises in the water pump: The noises generally come from the belt or bearings. If the belt is too tight, it can cause noise. If it's a bearing issue, minor problems may include lack of lubrication or corrosion due to coolant leakage, while severe cases could involve bearing breakage. Solutions: If the belt is too tight, adjust it. For bearing issues, remove the pump to clean off rust and apply lubricant. If the bearing is severely damaged, replace it with a new one.

5

Share

What Causes the Engine RPM to Increase but the Vehicle Speed Not to Rise When Accelerating?

The reason why the engine RPM increases but the vehicle speed does not rise when accelerating depends on whether the engine is paired with a manual transmission or an automatic transmission. The fact that the RPM increases when the accelerator is pressed indicates that the engine's power operation is functioning properly. The inability to increase speed suggests that there is damage in the components transmitting power to the transmission. If a manual transmission is used, the common main causes are issues with the clutch or the transmission itself. The clutch acts as an intermediary for power transfer between the engine and the transmission. If the clutch friction plate is slipping, it can lead to a loss of power. Manual transmissions have high transmission efficiency. If the clutch is functioning correctly, possible faults could be related to the output shaft or the engagement gears of the selected gear. For automatic transmissions, a common main reason is the torque converter not locking up. Normally, when the engine RPM, vehicle speed, and throttle depth reach certain levels, the torque converter locks up. If it fails to lock up, it can result in the engine revving without the vehicle accelerating. This phenomenon is mainly observed in vehicles equipped with torque converters, such as all ATs and some CVTs. In this regard, dual-clutch transmissions perform much better. Solutions for high RPM without an increase in vehicle speed: First, check the level of the transmission hydraulic fluid. If the fluid level is too low or too high, it should be adjusted accordingly. Then, observe whether the transmission continues to slip. If slipping persists, inspect the quality of the hydraulic fluid. If the fluid appears dark brown or has a burnt smell, it indicates that the friction plates of the clutch or brake, or the brake bands, are burnt. In such cases, the transmission needs to be disassembled for repair. Additionally, a road test can be conducted to determine if the automatic transmission is faulty. Shift the gear lever into different positions and drive the vehicle. If the engine RPM suddenly increases when the automatic transmission shifts to a certain gear, but the vehicle speed does not rise accordingly, it indicates that the gear is slipping. The easier it is for the engine RPM to increase during slipping, the more severe the slipping is.

19

5

Share

Where is the Nissan Tiida washer motor fuse located?

Nissan Tiida washer motor fuse is located at the front left of the engine compartment. There is a black box inside, and opening the black box will reveal the washer motor fuse. Checking windshield washer operation: First, check if there is water in the windshield washer fluid reservoir, which is located on the right side of the engine compartment. When facing the front of the car, it's at the lower left side of the engine compartment, next to the engine generator. How to use the windshield washer: After filling the washer fluid, with the vehicle's electrical system fully powered (ignition in ON position) or with the engine running, pull the wiper control lever upward (toward the driver) for front windshield washing, or push it downward (toward the front of the car) for rear windshield washing.

3

0

Share

What is the app called for BMW 5 Series dash cam?

Where is the maintenance reset button for Volkswagen cars?

What is the difference between Comfort mode and Auto mode in Audi A4L?

What is the curb weight of the Yuhu 7?

Can the Corolla continue to drive if the water pump makes abnormal noises?

What Causes the Engine RPM to Increase but the Vehicle Speed Not to Rise When Accelerating?

Where is the Nissan Tiida washer motor fuse located?

Does Water in the Exhaust Pipe Affect the Car?

What does Geely M1 and M2 mean?

Why can't the automatic transmission of the new BenBen engage?

Why Can't My Phone Find the Civic's Car Bluetooth?