What is the anti-theft fuel system of the Excelle?

1 Answers
KatherineDella
07/30/25 6:26am
The anti-theft fuel system of the Excelle is a security feature designed to prevent vehicle theft. Below is an introduction to the Excelle's anti-theft fuel system: 1. Function of the Excelle's anti-theft fuel system: It effectively protects the vehicle from theft. When the anti-theft fuel system is activated, the vehicle's engine cannot start. If tested, the engine will have high-voltage sparks, but the fuel injectors will not receive any trigger signals, meaning no fuel is injected. As a result, the engine cannot start, thereby achieving the anti-theft effect. 2. Applicable scenarios: The anti-theft fuel function of the Excelle is suitable for parking in remote areas or in third- or fourth-tier cities. Activating this function can effectively achieve the purpose of vehicle theft prevention.
Was this review help?
7
4
Share
More Forum Discussions

How to turn off the auto start-stop in A4?

A4 turns off the auto start-stop by: 1. Pressing the brake pedal hard to shut off the engine; 2. Releasing the brake pedal to start the engine automatically. The auto start-stop button in A4 is located on the left side of the gear shift. This function is turned on by default and can be turned off by pressing the button, with the corresponding indicator light illuminating to indicate the deactivation. In terms of power, the A4 is equipped with a 2.0TFSI engine, delivering a maximum power of 252PS and a peak torque of 370NM. For transmission, the A4 comes with a 7-speed Stronic dual-clutch transmission, paired with the quattro all-wheel-drive system, ensuring a more convenient driving experience.
20
1
Share

Where is the engine number located on the Baojun 510?

The engine number of the Baojun 510 is located on the engine block. Open the engine hood, and the engine number can be found at the lower right front of the engine block. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. The engine model is an identification code assigned by the engine manufacturer in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. It is used to represent information such as the manufacturer, specifications, performance, features, technology, purpose, and production batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose passenger vehicles must be marked with the professional manufacturer, model, and production number of the engine as required. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's lineup, and multiple engines can share the same model. The engine number, however, refers to the unique production number of the engine. Each engine can only have one engine number, and the number is unique to each engine. Composition of the vehicle engine number: Front section: Includes the product series code, generation symbol, and regional or corporate code. Manufacturers can choose the appropriate letters as needed, but they must be approved and filed by the industry standardization authority. Middle section: Consists of symbols for the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Rear section: Composed of symbols for structural features and usage characteristics. Tail section: Distinguishing symbol. When differentiation is needed due to improvements or other reasons within the same product series, the manufacturer selects an appropriate symbol. The rear and tail sections can be separated by a hyphen (-).
6
5
Share

How to operate the cruise control on the Trumpchi GM8?

The operation method of the cruise control on the Trumpchi GM8 is: 1. Press the adjustment switch to activate the cruise control standby mode; 2. To accelerate, push the adjustment lever upward or step on the accelerator. To cancel the cruise control, lift the adjustment lever upward; 3. Turn off the cruise control master switch, step on the accelerator pedal, or lightly tap the brake; 4. After pressing the cruise control master switch, the cruise control indicator will appear on the instrument panel to show the standby status; 5. Lightly stepping on the brake will cancel the cruise control mode. The Trumpchi GM8 is an MPV model with a body length of 5066 mm, width of 1884 mm, height of 1832 mm, and a wheelbase of 3000 mm. The Trumpchi GM8 is equipped with a 2.0-liter turbocharged engine across all variants, delivering a maximum power of 185 kW and a maximum torque of 390 Nm.
11
3
Share

How to Replace the Rear Brake Pads on an Atenza?

The method for replacing the rear brake pads on an Atenza is as follows: 1. First, remove the wheel and take off the dust cover; 2. Remove the caliper fixing bolts and take off the brake caliper; 3. Then, remove one of the fixing bolts on the brake caliper, apply force to the caliper with a flat-head screwdriver to automatically retract the brake cylinder piston, and then take out the brake pads; 4. Alternatively, you can use a piston adjustment tool to retract the brake cylinder piston, then remove and insert the new brake pads. The Atenza is a mid-size sedan under Mazda, with a body length of 4870 mm, width of 1840 mm, height of 1445 mm, and a wheelbase of 2830 mm. The Atenza uses a 6AT transmission and is equipped with two engines: a 2.0L naturally aspirated engine and a 2.5L naturally aspirated engine.
13
5
Share

How to Use the Paddle Shifters on the Corolla Hybrid?

The method to use the paddle shifters on the Corolla Hybrid is: 1. When operating the paddle shifters, simply shift the gear into D, S, or manual mode. Pulling the paddle toward the driver with the index and middle fingers upshifts the gear; 2. Pushing the paddle toward the steering wheel with the thumb downshifts the gear. The Corolla is a compact car with body dimensions of 4630mm in length, 1775mm in width, and 1480mm in height. The Corolla offers engine options including 1.2T, 1.6L, 1.8L, and 2.0L, equipped with a new engine featuring dual VVTi. The Corolla's 2.0L naturally aspirated four-cylinder engine delivers a maximum power output of 125kW and a peak torque of 210Nm, paired with either a CVT transmission or a 6-speed manual transmission.
1
1
Share

How to Use the Electronic Parking Brake in a Car?

To use the electronic parking brake in a car: 1. Press the brake pedal and pull up the electronic parking brake switch until the indicator light on the dashboard illuminates to activate it; 2. While pressing the brake pedal, push the electronic parking brake switch, and the indicator lights on both the dashboard and the switch will turn off to deactivate it. The electronic parking brake, also known as the Electronic Parking Brake (EPB), is primarily used for long-term braking after parking, similar to traditional mechanical handbrakes. With the advancement of electronic parking brake systems, its functionality has expanded from basic parking to include automatic parking features, eliminating the need for drivers to hold the brake pedal for extended periods when the vehicle is stationary.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.