What is the amount of antifreeze required?

[VanAlexandra]

The amount of antifreeze required is 6L to 7L. The method for adding antifreeze is as follows: 1. Unscrew the radiator cap, open the radiator drain valve, and drain the antifreeze; 2. Insert a rubber tube into the radiator filler neck, turn on the tap to flush the engine cooling system; 3. After draining the water from the cooling system, close the radiator drain valve; 4. Unscrew the reservoir cap and add antifreeze until the liquid level reaches the MAX mark; 5. Tighten the reservoir cap; 6. Start the engine and let it idle for 2 to 3 minutes, then unscrew the radiator cap to allow the cooling system to expel some air. The antifreeze level will drop, so refill it to the MAX mark again.

[MacChloe]

The amount of antifreeze really varies—it entirely depends on the model of your car. When I first started driving, I was confused too, but a mechanic later taught me to check the owner's manual. The manual specifies the cooling system capacity, usually around 5 to 10 liters. When adding antifreeze, make sure the car is parked and has cooled for several hours, then open the hood to check the coolant reservoir. The tank will have min and max level marks—just keep the fluid between those lines and avoid overfilling to prevent leaks and engine damage at high temperatures. Antifreeze isn't just for winter freeze protection; it also prevents boiling and corrosion in summer. Insufficient levels can cause the engine to overheat and fail. So, check the level once or twice a year, and if it's low, top it up with the original brand—don't cut corners by mixing in water.

[VonOlive]

Let's talk about the amount of antifreeze. I've dealt with this on several cars. The capacity varies quite a bit between different models. For example, compact cars may need around 6 liters, while SUVs or high-displacement vehicles can require up to 12 liters. After buying a car, first check the owner's manual for the exact amount or look up your model's specifications online. The key to adding antifreeze is monitoring the fluid level—when the engine is cool, the coolant level in the reservoir should be between the min and max marks. Overfilling can cause leaks due to thermal expansion. Antifreeze protects the engine from rust and prevents freezing/boiling, so using the correct amount is crucial for safety. I personally check it every few months, and if the level drops quickly, I consider potential leaks—don't push your luck driving with low levels, as repairs can be much more expensive.

[Ian]

The amount of antifreeze actually depends on the vehicle's condition. For most cars, the cooling system holds about 5 to 10 liters. As someone who often helps friends with car repairs, I recommend checking the owner's manual for the most accurate figure. Don't add antifreeze arbitrarily – when the engine is cold, the coolant level in the reservoir must be between the MIN and MAX marks. Antifreeze prevents freezing and boiling, and incorrect amounts can lead to engine overheating and costly repairs. The easiest way is to check it during every routine maintenance.