What is the air suspension value of the Mercedes-Benz S350?

2 Answers
LaAdrian
08/30/25 3:00am
The air suspension value of the Mercedes-Benz S350 can reach up to approximately 3 centimeters. Below is a related introduction to air suspension: 1. Introduction: A high-quality SUV must possess the comfort of a sedan while also maintaining the off-road capability of an SUV. The air suspension system is the best choice to achieve this goal. 2. Function: Based on road conditions and signals from distance sensors, the vehicle's computer determines changes in body height and then controls the air compressor and exhaust valves to automatically compress or extend the springs. This adjusts the chassis ground clearance to enhance high-speed stability or improve off-road capability in complex road conditions.
Was this review help?
2
5
Share
LeEmma
09/11/25 7:08am
I've been driving a Mercedes-Benz S350 for many years, and the air suspension values mainly refer to the height adjustment range. Generally, the height varies by about 20-30 mm between different modes. For example, during normal driving, the height remains fixed. When switching to Sport mode, the body lowers by 20 mm to enhance handling, while in Comfort mode or on uneven roads, it rises by up to 30 mm to improve cushioning. Additionally, the system includes stiffness settings divided into several levels, though it doesn't display specific numbers. Instead, it automatically adjusts the air pressure between approximately 1 to 1.5 bar to balance comfort and durability. Personally, I don’t pay much attention to these numerical details—the Mercedes adaptive system is very thoughtful and adjusts automatically based on speed and road conditions. For maintenance, I recommend owners check the suspension height alignment every six months. If the wheel arch-to-body distance varies too much, it could indicate an issue and affect the overall driving experience.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What are the symptoms of a faulty ignition coil in an old Jetta?

There are three main symptoms of ignition coil failure: short circuit, open circuit, or grounding of the ignition coil winding; surface discharge; and insulation aging. Here is a related introduction about the igniter: 1. Composition: The igniter is mainly composed of a power source, ignition coil, distributor, ignition switch, spark plug, additional resistor and its short-circuit device, high and low voltage wires, etc. 2. Identification method: When all the wiring of the igniter is connected, do not connect the power line (the charging end of the AC igniter) first, or disconnect the high-voltage output line of the magneto in advance. After ensuring that the ground wire of the igniter is well connected to the ground wire of the vehicle circuit, pull the high-voltage cap out of the spark plug and insert a spare spark plug to ground it on the vehicle body. Finally, connect the DC circuit of the motorcycle (the live wire is connected to the positive terminal of the battery) to the charging end of the igniter.
6
5
Share

Where is the Lexus Defogger Switch?

The Lexus defogger switch is located on the leftmost button in the center of the longest row of switches on the center console. Here is a related introduction to defogging methods: 1. Using the car air conditioner: Adjust the air vent to the windshield position, turn on the air conditioner, engage the compressor, and rotate the temperature knob to the warm air position. This method can both defog and provide warmth. 2. Using anti-fog spray: Spray "car glass anti-fog spray" (such as Fog Fighter) onto the inner surface of the car glass and wipe it clean. This not only removes dirt from the glass but also forms a thin transparent protective film on the surface, effectively preventing moisture from condensing into fog. One application can prevent fogging for about 10 days.
16
0
Share

Why does the Beidouxing's low beam not work while the high beam does?

The low beam of the Beidouxing car may not be working while the high beam does because the low beam filament might have burned out. Here is more information about high and low beams: 1. High beam: Adjusts the intensity of the light based on the distance of the filament. The high beam is at its focal point, emitting light that is parallel and highly concentrated, providing greater brightness and the ability to illuminate distant and high objects. When the high beam is beyond its focal point (between 1 and 2 times the focal distance), the emitted light diverges, illuminating a larger area of nearby objects. 2. Low beam: The low beam is designed for close-range illumination. Its design requirements include a wide coverage angle (160°) and short illumination distance, with no adjustable focus.
6
5
Share

What do ODO and TRIP mean on a car?

ODO is the abbreviation for odograph, which means odometer; TRIP represents the single-trip mileage, i.e., the distance recorded after manually resetting the odometer. Extended information about the car dashboard is as follows: 1. Introduction: The car dashboard is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights. 2. Odometer: The odometer is a digital instrument that operates through the meshing of the counter drum gear with the worm gear on the speedometer drive shaft, causing the counter drum to rotate. Its characteristic is that when the upper drum completes a full rotation, the lower drum rotates 1/10 of a turn. Like the speedometer, modern odometers also include electronic versions, which obtain mileage signals from speed sensors. The accumulated mileage data in electronic odometers is stored in non-volatile memory, preserving the data even when power is off.
9
0
Share

Where is the one-touch window lift for the 2021 Leiling Sport Edition?

Open the car door, press the one-touch start switch, raise the power window to the top, continue pressing the switch for 5 seconds, then lower the power window to the bottom, and keep holding the switch for another 5 seconds to complete the setup for one-touch window lift. Here is an introduction to the one-touch start feature: 1. Introduction: The car one-touch start is a part of smart car devices, a button mechanism designed to simplify the ignition process, which can also be used to turn off the engine. The car one-touch start can be installed at the original key lock position or as an independent panel modification. 2. Functions: The functions of the one-touch start intelligent system include: automatic unlocking, automatic locking, automatic window closing, automatic anti-theft, one-touch start, one-touch shutdown, automatic locking before driving, automatic unlocking when parking and turning off the engine, and a trunk opening function.
1
3
Share

How Many Years Until the Wuling Hongguang is Mandatorily Scrapped?

There is no mandatory scrapping period for the Wuling Hongguang; it only needs to pass the annual inspection. Additional information is as follows: 1. Introduction: The Wuling Hongguang is the first self-developed crossover product between commercial vehicles and passenger cars launched by SAIC-GM-Wuling. This product features a sleek exterior design, a versatile and practical spacious cabin. 2. Exterior: The Wuling Hongguang adopts the currently very popular double-U front face design and a three-dimensional vertical waterfall-style chrome grille, which not only makes the front look more stylish and dynamic but also inherits some characteristics of the GM series. The striking eagle-eye crystal diamond headlights and feather-shaped crystal diamond front fog lights further enhance the vehicle's premium feel.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.