What is the age requirement for applying for an A1 driver's license?

1 Answers
DelLucille
07/28/25 5:16pm
The age requirement for applying for an A1 driver's license is between 26 and 50 years old. Other requirements are as follows: Height must be at least 155 cm; visual acuity must be at least 5.0 on the logarithmic visual acuity chart (either naked or corrected vision); no red-green color blindness; ability to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork; both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement function; both lower limbs must be intact with normal movement function, with a length difference not exceeding 5 cm and no movement dysfunction. An A1 driver's license can only be obtained through license upgrading and cannot be applied for initially like a C1 or B2 license. The most common path is to start with a C1 license, then upgrade to an A3, B1, or B2 license before upgrading to an A1 license. Applicants must have held an A3, B1, or B2 license for at least five years and must not have accumulated 12 penalty points in the current scoring cycle or the last five consecutive scoring cycles to upgrade to an A1 license. For those upgrading from an A2 license to an A1 license, the requirements are: having held the A2 license for at least two years and not having accumulated 12 penalty points in the previous scoring cycle. According to Article 12 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," applicants must meet the following requirements: For small cars, small automatic transmission cars, small automatic transmission cars for the disabled, and light motorcycles, the age requirement is between 18 and 70 years old. For low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the age requirement is between 18 and 60 years old. For city buses, large trucks, trolleybuses, or trams, the age requirement is between 20 and 50 years old. For medium-sized buses, the age requirement is between 21 and 50 years old. For tractor-trailers, the age requirement is between 24 and 50 years old. Students undergoing full-time driving vocational education who apply for large buses or tractor-trailers must be between 20 and 50 years old. The permitted vehicle types for an A1 license include: large buses with a capacity of 20 or more passengers, as well as passenger vehicles with a body length exceeding 6 meters. Other permitted vehicle types include: A3 (city buses), B1 (medium-sized buses), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled vehicles), and M (wheeled self-propelled machinery).
Was this review help?
16
3
Share
More Forum Discussions

Differences Between Lamborghini Aventador and Huracan?

The specific differences between Lamborghini Aventador and Huracan are as follows: 1. Different powertrains: The Lamborghini Aventador is equipped with a 6.5L V12 engine with a maximum power of 566KW, maximum torque of 720N·m, and 770Ps horsepower; while the Lamborghini Huracan is equipped with a 5.2L V10 engine with a maximum power of 470KW, maximum torque of 600N·m, and 640Ps horsepower. 2. Different sizes: The Lamborghini Aventador measures 4943mm in length, 2098mm in width, 1136mm in height, and has a wheelbase of 2700mm; the Lamborghini Huracan measures 4520mm in length, 1933mm in width, 1165/1180mm in height, and has a wheelbase of 2620mm. From this, it can be seen that the Aventador is larger in size than the Huracan, but at the same time, its body height is lower, which optimizes aerodynamics better. 3. Different steering assistance methods: The Lamborghini Aventador uses an electro-hydraulic power steering system that provides clearer feedback on road feel. The Lamborghini Huracan, on the other hand, uses the most common electric power steering system. 4. 0-100km/h acceleration: The Lamborghini Aventador SVJ accelerates from 0 to 100km/h in 2.8 seconds; while the Lamborghini Huracan EVO accelerates from 0 to 100km/h in 2.9 seconds, and the Huracan EVO Spyder in 3.1 seconds.
12
2
Share

What Engine Does Baojun Use?

Baojun's engines are produced by SAIC Liuji, independently developed by SAIC-GM-Wuling, utilizing General Motors' technology and quality management systems. Therefore, Baojun uses domestically produced engines. Baojun has two engine models: the L2B and the LJO. The L2B engine has a maximum horsepower of 105 HP, a maximum power output of 77 KW at 5600 rpm, and a peak torque of 135 N.m. The LJO engine has a maximum horsepower of 147 HP, a maximum power output of 108 KW at 5200 rpm, and a peak torque of 250 N.m. For daily maintenance of Baojun's engines, the following methods can be used: Use lubricating oil of appropriate quality. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, select CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent failures, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass the filter and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
18
2
Share

What does the A button in a sedan mean?

Sedan A button refers to the Auto Hold system. When this switch is turned on, after the vehicle is braked to a stop during driving, even if the brake is released, the vehicle will not continue to move. It will only resume driving when the accelerator is pressed, and can only be turned off manually. The Auto Hold system is a technological application that enables automatic handbrake function during vehicle operation. This technology allows drivers to avoid prolonged braking when the vehicle is stationary, and prevents unnecessary vehicle slippage when the automatic electronic parking brake is engaged.
18
4
Share

Can You Start the Car Directly in P Gear?

You can start the car directly in P gear. The correct practice is to ignite the engine in P gear. In fact, many car models are now designed to only allow ignition in P gear for safety considerations. The function of P gear is to disconnect the engine from the wheel transmission system. When in P gear, a mechanical lever locks the output shaft, preventing the vehicle from moving to avoid rolling. P gear is a common gear in automatic transmission vehicles, usually located at the foremost position of the gear shift console, in front of the R gear. Its purpose is to lock the axle when the car is stationary on a slope.
10
3
Share

What is the spark plug model specification for the Kia K3?

The spark plug model specification for the Kia K3 is the NGK 1RSILZKR7B11 iridium-platinum alloy spark plug. Spark plugs, commonly known as sparkers, function by discharging the pulsed high voltage sent from the high-tension lead, breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder. The Kia K3 has a body length, width, and height of 4600mm, 1780mm, and 1445mm respectively, with a wheelbase of 2700mm. Its tiger-nose front grille features a new black mesh treatment, and the connected headlights have a sleeker design with an updated internal structure.
6
5
Share

Does Replacing the Clutch Require Removing the Transmission?

Replacing the clutch does require removing the transmission. To replace the clutch, the half-shafts on both sides of the transmission must first be removed, the transmission fluid drained, and then the clutch can be replaced. Symptoms indicating that the clutch needs replacement include: for manual transmission vehicles, if the vehicle does not stall or stalls with a delay when starting on a slope after releasing the clutch, it indicates severe wear of the clutch disc, which should be replaced immediately to prevent safety hazards. Daily precautions for the clutch disc include: 1. Do not coast in neutral with an automatic transmission vehicle to avoid damaging the transmission and clutch; 2. For manual transmission vehicles, fully depress the clutch when shifting gears to prevent wear on the clutch disc.
15
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.