What is the age requirement for a B2 driver's license?

1 Answers
LeFelix
07/30/25 5:11am
The age requirement for obtaining a B2 driver's license is that applicants must be between 20 and 50 years old. For those who already hold a B2 license, they are not allowed to drive vehicles under this license type after reaching 60 years old. Below is relevant information about the B2 driver's license for vehicles: 1. Main vehicle types allowed: The B2 license permits the driving of heavy-duty, medium-duty trucks or large, heavy, and medium-sized special-purpose vehicles. Heavy-duty and medium-duty trucks are primarily trucks. Large, heavy, and medium-sized special-purpose vehicles refer to vehicles equipped with specialized devices or equipment, such as water sprinklers, concrete mixers, fire trucks, etc. 2. Other vehicle types allowed: The B2 license also allows driving other vehicle types, including C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery), which is the same as the B1 license.
Was this review help?
11
1
Share
More Forum Discussions

How to Check Someone Else's Traffic Violations?

First, open a browser on your computer, then search for 'traffic violation query' in the search box and select the official website to open. Next, on the navigation page's dropdown section, enter the location where the vehicle you want to check is registered in the required field and click 'Confirm'. Then, a new page from the traffic management bureau will pop up, where you simply need to click on 'Vehicle Violation Query'. Upon entering the motor vehicle violation query page, input the license plate type, number, the last 6 digits of the engine number, and the verification code, then click 'Query'.
5
0
Share

What is the fuel consumption per 100 kilometers for the Malibu?

The fuel consumption per 100 kilometers is 6.8 liters, which translates to 0.068 liters per kilometer. The Chevrolet Malibu is equipped with a 1.5T engine paired with a 6-speed automatic transmission, delivering a maximum power of 125kW (170PS). The maximum rated power (Kw/rpm) is 125/5600, with a displacement (ml) of 1490 and a maximum torque (Nm/rpm) of 250.3/2000-4000. Here is some related information: Fuel consumption: Generally refers to the constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the fuel consumption test under constant-speed driving conditions as stipulated by national standards. Product features: In terms of appearance, the Malibu integrates the headlights and the front grille, with the headlights adopting a combined high/low beam structure and xenon light sources. In terms of power, the Malibu is equipped with a 1.5T engine with a maximum power of 125kW (170PS), and the transmission system uses a 6-speed automatic transmission. The lowest comprehensive fuel consumption per 100 kilometers under standard driving conditions is 6.8L.
6
0
Share

What Causes the Engine Warning Light to Illuminate with Engine Shaking and Stalling?

When the engine warning light illuminates accompanied by vehicle shaking, the cause is typically poor combustion of the air-fuel mixture. Incomplete combustion leads to engine carbon buildup, which is the primary reason for vehicle shaking. Additionally, when the oxygen sensor detects this poor combustion and reports it to the ECU, the warning light activates as an alert. This explains why the engine warning light and vehicle shaking often occur simultaneously. Several issues can cause poor air-fuel mixture combustion, including faulty spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines. If the engine warning light illuminates, follow these steps: First, check if the engine is operating normally—look for symptoms like shaking, black smoke emissions, or difficulty starting. If present, avoid restarting the engine. Importantly, never restart the engine if the red warning light is on. If the engine runs normally and the vehicle is drivable, proceed to a service station promptly for diagnosis. Technicians can easily retrieve trouble codes using a portable diagnostic tool to pinpoint and address the issue. For normally functioning engines, owners may also try gently reseating all wiring harness connectors (as loose connections could be the culprit) or repeatedly turning the ignition key to the ON position to see if the warning resets.
5
5
Share

How to Adjust Brake Pulling to the Left?

Adjust and repair the braking system. During testing, if the brake marks are inconsistent, the brake pulling is caused by the braking system. Adjust and repair the steering system. If the brake marks are basically consistent but the vehicle still pulls, check whether the ball joints in the steering system are loose. Check whether the front axle suspension is loose. Focus on inspecting the shackle and spring pins, the height of the left and right springs, and whether the spring tension is consistent.
11
2
Share

What Causes Abnormal Noise During Gear Shifting in the Transmission?

Here are the main reasons for abnormal noise during gear shifting in the transmission: 1. Transmission bearings often operate under high-speed and heavy-load conditions, enduring significant alternating loads. As a result, the rolling balls or cylindrical rollers and raceways of the bearings may experience wear, spots, fatigue spalling, or burning, leading to increased axial and radial clearance, which causes impact noise. 2. During gear meshing transmission, sliding friction exists from the tooth top to the tooth root, making wear inevitable. Due to gear wear, the meshing clearance increases, resulting in impact noise during vehicle operations such as starting or shifting gears. 3. After bearing wear causes looseness, shaft deformation or housing deformation alters the center distance between meshing gears and causes misalignment of axes; wear in the sliding keyways on the shaft and internal spline grooves of sliding gears; loose fastening bolts in the control mechanism and wear or deformation of the shift fork can lead to gear displacement. 4. Improper driver operation, such as aggressive starting or poor hand-foot coordination during gear shifting, can cause significant impact loads in the transmission, leading to broken or shattered gear teeth and abnormal noise.
11
0
Share

What is the fuel tank capacity of the Malibu?

The 2022 Malibu comes in a total of 9 models. The 2022 Malibu 535T has 3 versions, all with a fuel tank capacity of 55 liters; the 2022 Malibu 550T has 6 versions, all with a fuel tank capacity of 60 liters. The Malibu features a MacPherson strut front suspension and a multi-link rear suspension, with all models being front-wheel drive. In the same class, the 2021 K5 KaiKu 270T CVVD Fashion Edition has a fuel tank capacity of 60 liters, and the 2020 Sonata Modified 270T GDi DCT GL Leading Edition also has a fuel tank capacity of 60 liters. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, with additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount may exceed the marked capacity. To check the remaining fuel, drivers can observe the fuel gauge on the right side of the dashboard, marked with E and F. When the needle is near E, it indicates low fuel, and when it is close to F, it means the tank is nearly full.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.