What is the age range for a driver's license test?

1 Answers
VanElizabeth
07/30/25 12:12am
According to Article 12 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Age requirements: 1. To apply for small cars, small automatic transmission cars, small automatic transmission passenger cars for the disabled, or light motorcycles, the applicant must be between 18 and 70 years old; 2. To apply for low-speed trucks, three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, the applicant must be between 18 and 60 years old; 3. To apply for city buses, large trucks, trolleybuses, or trams, the applicant must be between 20 and 50 years old. 4. To apply for medium-sized passenger vehicles, the applicant must be between 21 and 50 years old.
Was this review help?
15
1
Share
More Forum Discussions

How to Slow Down and Downshift for Beginner Drivers

Downshifting methods for beginner drivers: Downshift after slowing down, and brake before intending to slow down. In daily driving, downshifting one gear at a time is not very effective; generally, it involves skipping a gear. Common downshifting sequences are 5-3, 3-1, or 3-2-1. For example, shifting from 5th to 3rd is straightforward—remove from 5th gear, release the clutch, and gently push up to engage 3rd gear. Here are some additional details: Notes on gear shifting: In the transmission, gears with smaller numbers are called lower gears. The smaller the number, the higher the gear ratio, the greater the traction, and the lower the speed. For instance, 1st gear has the lowest speed but the highest traction.
19
5
Share

What does ARS mean on a car?

ARS on a car should refer to the ASR system, which stands for Acceleration Slip Regulation system. 1. Principle: The system is equipped with wheel speed sensors. When the vehicle's tires start to slip, the sensors can quickly detect this and transmit the wheel slip signal to the ASR system processor. The processor then sends a braking signal to the ABS (Anti-lock Braking System), preventing the wheels from spinning in place. 2. Function: Its main purpose is to prevent the driving wheels from slipping during acceleration. Especially on special road surfaces with reduced friction, such as rain, snow, hail, or icy conditions, it controls the slip ratio within a certain range during acceleration to prevent rapid slipping of the driving wheels. One of its functions is to improve traction.
5
3
Share

Does it matter if the car maintenance is delayed by two months?

If the car is driven normally, there is not much impact. Because maintenance is mainly to confirm whether the vehicle has any abnormalities and to replace certain parts or engine oil, as long as the parts are in good condition, the engine oil used is of good quality and high grade, and the oil is not black when checked, a slight delay in maintenance is not a big issue. However, if the car has not been driven for one or two months and the maintenance period has passed, it is recommended to go for maintenance as soon as possible. Here are some related introductions: 1. Only regular maintenance can keep the vehicle in good condition. If maintenance is not done properly, the failure rate will increase accordingly. Generally, vehicle maintenance can be delayed for up to about three months; 2. Due to significant differences in road conditions, fuel quality, altitude, temperature, air conditions, and other factors in different regions, the actual condition of the vehicle may deviate from the manufacturer's preset general conditions. Therefore, it is best to follow the vehicle maintenance manual for regular maintenance or, if conditions permit, to perform maintenance appropriately in advance as needed.
17
0
Share

Which is the external circulation in car AM?

In car circulation, 'A' stands for automatic control of the car's internal and external circulation, while 'M' represents the external circulation. When the 'A' button is pressed, the air conditioning system will automatically determine whether internal or external circulation is needed based on the air quality outside the car. When the 'M' button is pressed, the car is in internal circulation when the light is on, and in external circulation when the light is off. Below are the functions of internal and external circulation in cars: 1. Function of external circulation: External circulation mainly serves the purpose of ventilation. When the air inside the car is relatively polluted, the car needs to turn on the external circulation to replace the air inside. 2. Function of internal circulation: When the car turns on internal circulation, the air inside the car does not flow, and the air current circulates in a closed environment.
9
5
Share

How Many Points Does a Crew License Have?

Crew members have a total of 15 points within a scoring cycle. Below is extended information regarding crew licenses: 1. Points for Violations: The point deductions for crew violations are categorized into five levels: 15 points, 8 points, 4 points, 2 points, and 1 point. 2. Classification of Crew Licenses: Crew licenses are classified into Class A, Class B, Class C, and Class D competency certificates. The classifications are as follows: (1) By Navigation Area: Divided into unlimited navigation areas, near-sea navigation areas, coastal navigation areas, and near-shore navigation areas (i.e., Class A, B, C, D). Deckhands and engine room personnel are only classified under Class B and C. (2) By Vessel Grade: Divided into First-Class, Second-Class, and Third-Class competency certificates.
7
4
Share

What is the difference between low gear and high gear in a car?

The difference between high gear and low gear lies in their different purposes. Low gear provides slower speed but greater torque, making it suitable for climbing hills or hauling heavy loads. High gear offers less torque but higher speed, making it ideal for highway driving. Introduction to manual transmission gears: A standard manual transmission car has 5 forward gears, one reverse gear, and a neutral position in between. 1st gear is used for starting; 2nd gear is used at speeds between 20-40 km/h; 3rd gear is used at speeds between 40-60 km/h; 4th gear is used at speeds between 60-75 km/h; 5th gear is used at speeds above 75 km/h; Reverse gear is used for backing up; Neutral is used for temporary parking, during which the brake pedal must be pressed or the handbrake must be engaged to prevent the car from rolling. Introduction to automatic transmission gears: L gear: This is the low gear, used when climbing hills, maintaining high RPM in a low gear state. S gear: This is the sport mode, where the transmission shifts freely based on current speed and the driver's throttle input, but with a slight delay in shifting. D gear: This is the drive gear, used when moving forward. N gear: This is the neutral position, used for temporary stops, such as waiting at a traffic light. P gear: This is the parking gear, used when parking to engage the parking brake and prevent the car from rolling. R gear: This is the reverse gear, used when backing up. It should only be engaged when the car is completely stopped to avoid severe damage to the transmission. B gear: This is the brake gear, used when descending long slopes. Engaging B gear activates engine braking, preventing overheating of the brake pads from prolonged use of the service brakes and avoiding potential accidents.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.