What is the age limit for a C-class driver's license?

How Soon Should the First Oil Change Be for a New Car?

The first oil change for a new car is typically recommended at 5,000 kilometers or 6 months, but this is not absolute. The specific interval can be checked in the vehicle's maintenance manual. The first oil change is necessary because the engine of a new car needs a break-in period, during which some impurities may be generated, hence requiring an earlier oil and oil filter replacement. Below is a tutorial on changing car oil: 1. Run the engine until it reaches the required operating temperature. Then, use a jack to lift the vehicle, engage the handbrake, and secure the front wheels with wooden wedges. 2. Place a container for the old oil beneath the oil pan. Locate the oil pan drain plug and slowly unscrew it. Be careful not to come into contact with the hot oil and allow the oil to drain for a while. After the old oil has drained, inspect the drain plug and reinstall it. Avoid over-tightening the plug to prevent damage to the oil pan. 3. Move the oil container under the oil filter. Wear gloves and use an oil filter wrench to loosen the filter, then gently unscrew it. Don't worry about whether the filter is too tight or if it might get damaged during removal. Just ensure the interface screws and surrounding components are not damaged. 4. Select the appropriate oil filter for your vehicle based on the user manual. 5. Apply new oil to the gasket of the new filter. If the filter is installed vertically, you can pour some new oil into the filter to reduce dry friction during the next engine start.

20

3

Share

How to distinguish between dry and wet clutches?

Methods to distinguish between wet and dry dual-clutch systems: 1. The basic transmission principles of dry and wet dual-clutch systems are quite similar, with the key difference lying in the connecting medium between the clutch's driving plate and driven plate. This essentially refers to the different working environments of the clutch plates. 2. In a wet dual-clutch system, the clutch plates are immersed in transmission fluid, relying on the fluid for operation. In a dry dual-clutch system, the clutch plates are in direct contact with the engine flywheel, relying on air. 3. Since the clutch plates in a wet dual-clutch system operate in hydraulic oil, the fluid provides a certain cooling effect, making it more stable in use. Additionally, because it operates submerged in fluid, the friction occurs in a wet environment. The advantage of wet dual-clutch systems is their long service life, with most systems rarely experiencing faults. The downside is that wet dual-clutch systems have a more complex structure, and their power transmission efficiency is not as high as that of dry systems. 4. Dry clutches lack engine oil cooling and rely on exposed methods for heat dissipation, making their cooling efficiency inferior to that of wet dual-clutch systems. This is also why they are more prone to failure. Especially during traffic congestion, when the transmission frequently shifts between first and second gears, the wear is significantly greater.

1

Share

Reasons for Clicking Sound When Turning the Steering Wheel

Reasons for clicking sound when turning the steering wheel: 1. Friction between plastic components The steering wheel consists of various plastic parts. If the clearance is too small during rotation, abnormal sounds may occur, especially in new cars during the break-in period. If the sound persists after break-in, try reinstalling the steering wheel. 2. Friction between the steering column and floor mat Sometimes newly installed floor mats may be too large and come into direct contact with the steering column, causing friction during rotation. This is quite common and can be resolved by adjusting or replacing the floor mat. 3. Faulty clock spring inside the steering wheel Those who have disassembled the steering wheel should pay special attention - it might be caused by a broken clock spring or improperly connected clock spring plug. Replace the clock spring or secure the plug. 4. Worn steering tie rod end with play Replace the steering tie rod end, but remember to perform a wheel alignment afterward. 5. Leaking steering gear boot Replace the boot or reapply grease. However, greasing is only a temporary solution. 6. Steering gear malfunction If a "click-click" sound is heard when turning, it might indicate excessive gear clearance in the steering gear. Replace the steering gear to resolve this.

4

Share

The Relationship Between Power and Torque

Power and torque are related in that power is the product of torque and rotational speed; the greater the power, the greater the torque. Power and torque are aspects of a car's performance. Power refers to the work done by an object per unit of time, and maximum power is used to describe a car's dynamic performance, with maximum power expressed in kilowatts. Below is information about torque: 1. Torque refers to the moment output from the crankshaft end of the engine. In physics, it is the magnitude of the moment, equal to the product of force and the lever arm. 2. Under fixed power conditions, torque is inversely proportional to engine speed; the faster the speed, the smaller the torque, and vice versa, reflecting the car's load capacity within a certain range.

16

1

Share

How Many Days Will It Take to Receive a Text Message Reminder for Running a Red Light?

After running a red light, the text message notification for the violation is usually received within 3 to 7 days, with a maximum delay of around 13 days. However, some cities now offer "instant electronic police capture alerts," where the text message notification is received within 5-10 minutes of being captured. Note that this notification does not confirm the violation; it merely serves as a capture alert. The final determination of whether it is a violation takes 3-7 days. If it is indeed a violation, a follow-up text message will be sent. For traffic violations captured by surveillance cameras, vehicle owners generally do not receive the violation text message immediately. There is a delay, and the duration may vary. After the electronic camera captures the violation, the relevant violation information must be transmitted through a dedicated channel to the traffic police management center, where it is compiled and then verified by the relevant traffic police personnel. Once confirmed as a violation, the system automatically retrieves the vehicle owner's phone number based on the license plate information and sends the violation details via text message to the owner. After receiving the violation text message, the vehicle owner must visit the local traffic police department to handle the violation within one month before the annual vehicle inspection. Generally, if a vehicle owner suspects a violation, they can use 15 days as a benchmark. If no violation text message is received after 15 days, it is likely that no violation was recorded. Methods for Traffic Violation Queries: Traffic violation queries refer to checking motor vehicle violations of traffic regulations through online platforms or query terminals. There are five methods for vehicle violation queries: traffic branch terminal queries, vehicle violation website queries, phone queries, mobile text message queries, and mobile app queries. Website Query: Search for "vehicle violation query" and enter the vehicle information to check. Phone Query: Dial the local 114 (area code + 114) or 12580 to confirm traffic violations. Violations can only be processed at the location of the violation or the vehicle's license plate issuance office. For on-the-spot violations, such as those directly caught by traffic police, they must be handled at the violation location. Mobile Text Message Query: Open the text message interface on your phone, enter "WZ [license plate number] [license plate color]" in the message content, and send it to 1062650001. Mobile App Query: Open the Traffic Management 12123 app, select "Violation Query," and clear any unresolved violations.

17

5

Share

Car Won't Start Due to Dead Battery

Solutions for a dead battery are as follows: 1. Replace the vehicle's battery; 2. Use an emergency power source to start the vehicle; 3. Alternatively, start the vehicle by jump-starting it. Below is an introduction to the jump-starting method: 1. First, prepare two jumper cables. 2. Then, find a vehicle that can operate normally and position the front ends of both vehicles facing each other. 3. Secure the jumper cables to the batteries, connecting positive to positive and negative to negative, then start the functioning vehicle. 4. Next, start the vehicle that needs the jump-start, and quickly disconnect the cables once it starts to complete the jump-start process.

11

3

Share

What is the age limit for a C-class driver's license?

How Soon Should the First Oil Change Be for a New Car?

How to distinguish between dry and wet clutches?

Reasons for Clicking Sound When Turning the Steering Wheel

The Relationship Between Power and Torque

How Many Days Will It Take to Receive a Text Message Reminder for Running a Red Light?

Car Won't Start Due to Dead Battery

What to Do When Encountering Traffic Jams While Driving?

What is the meaning of the slow down sign?

Why is it difficult to shift gears when the car is hot?

How to open the front hood of an Audi A4?