What is the adjustment method for Volkswagen rearview mirrors?

2 Answers
Bryce
07/25/25 2:34am
The adjustment method for Volkswagen rearview mirrors is: Locate the adjustment button on the left door armrest in the driver's compartment, which has L and R markings. Turning it to the left adjusts the left rearview mirror, and turning it to the right adjusts the right rearview mirror. Taking the 2021 Volkswagen Tharu as an example, it belongs to the compact SUV category, with body dimensions of: length 4453mm, width 1841mm, height 1632mm, wheelbase of 2680mm, and a fuel tank capacity of 51L. The 2021 Volkswagen Tharu is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
9
5
Share
MakaylaMarie
08/10/25 4:38pm
Adjusting the rearview mirrors on a Volkswagen is quite straightforward. I remember spending some time figuring it out when I first started driving. Usually, there's a button panel on the driver's door marked with L and R, representing the left and right side mirrors. Press the L button to adjust the left mirror and the R button for the right, then use a four-way controller to move the mirror angle up, down, left, or right. Before adjusting, it's recommended to sit properly in the driver's seat and adjust the seat position for an accurate view. The interior rearview mirror can be adjusted manually to ensure a full view of the rear window. For the side mirrors, it's best to position them so you can see a slight outline of your car's rear and the surrounding blind spots, making lane changes or reversing safer. I've noticed slight variations in placement across different Volkswagen models—for example, the controls are on the door armrest in the Golf or Passat, while in the Polo, they might be positioned lower. Developing a habit of checking the mirrors before driving is crucial; improperly adjusted mirrors can be hazardous at night or in rainy conditions, especially when changing lanes, as you need to be extra vigilant about approaching vehicles from behind.
Was this review help?
15
3
Share
Expand All
More Forum Discussions

Is it necessary to install a tire pressure monitoring system?

It is necessary to install a tire pressure monitoring system. As a pre-warning safety system, the tire pressure monitoring system can alert the driver when abnormal tire pressure is detected, prompting timely action to prevent serious accidents. Under the same driving distance, insufficient tire pressure will consume more fuel. By using a tire pressure monitoring system to keep track of tire conditions, you can prevent tire blowouts, save fuel, and protect the environment. Excessive tire pressure reduces the shock absorption effect of the tires, thereby increasing the burden on the vehicle's suspension system. If the tire pressure is insufficient or uneven, it can easily cause braking deviation, increasing wear on the suspension system. Tire pressure monitoring systems are divided into three types: direct tire pressure monitoring, indirect tire pressure monitoring, and composite tire pressure monitoring.
13
1
Share

How to Start a Vehicle with a Key?

Methods to start a vehicle with a key: 1. After getting into the car, insert the key and turn it to the ON position. At this point, the vehicle's electrical system is activated, and all onboard computer chips and sensors receive power. It takes approximately 6 to 10 seconds for all sensors to complete a self-check. 2. If no issues are detected after the self-check (i.e., when all dashboard indicators turn off), turn the key further to start the engine. It is advisable to store the car key separately and avoid hanging it together with other keys or accessories. Otherwise, when the key is inserted into the ignition and swings back and forth while driving, it may affect the keyhole, causing the gap to widen over time and leading to potential starting issues. If the key is carried at the waist, be particularly cautious to avoid bending or pressing it forcefully when bending over, as excessive pressure may bend the key.
11
4
Share

How to Open the Hood of a Corolla?

To open the hood of a Corolla: Gently press the hood release button, and the hood will pop up slightly. Then, pull the latch located under the hood to fully open it. Once the hood is open, locate the support rod and insert it into the designated slot to keep the hood in the open position. The Corolla is a compact car produced by Toyota, with body dimensions of 4540mm in length, 1760mm in width, and 1490mm in height, and a wheelbase of 2700mm. In terms of power, the Toyota Corolla is equipped with a 1.2T turbocharged engine paired with a CVT transmission. This engine delivers a maximum power of 85kW and a maximum torque of 185Nm.
17
3
Share

How Many Years Are Car Tires Under Warranty?

Car tires are typically under warranty for 3 years, calculated from the date of sale, with the tire warranty period usually being 1 year. The specific duration for which tires can be stored is largely dependent on the storage environment. Tires should be stored in a cool, dry, and dark indoor area to prevent moisture accumulation inside the tires, which can be hazardous. Tires are circular elastic rubber products mounted on various vehicles or machinery for ground rolling. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance, while also requiring high wear resistance, flex resistance, and low rolling resistance and heat generation.
14
0
Share

Can Water Be Added to Antifreeze?

Antifreeze can be mixed with an appropriate amount of soft water. About 95% of antifreeze is ethylene glycol-based water coolant. Ethylene glycol is a colorless, slightly viscous liquid that can be mixed with water in any proportion. After mixing, the vapor pressure of the coolant changes, significantly lowering the freezing point. Do not add tap water to antifreeze, as tap water tends to produce scale. You can add an appropriate amount of distilled water or soft water, but only in moderation. Adding too much will increase the freezing point of the antifreeze. The primary purpose of antifreeze is to transfer heat to the radiator during engine operation and dissipate the heat to maintain the engine's normal working temperature. When replacing antifreeze, it is advisable to have it done at a 4S shop or a professional repair shop. When topping up antifreeze, try to use the same product as the vehicle to avoid chemical reactions.
13
4
Share

What Impact Does Tire Size Have on a Car?

Tire size's impact on a car: Under conditions such as high-speed cornering with significant lateral forces, tires with larger sizes exhibit less deformation compared to standard wheels, thereby enhancing handling responsiveness. However, excessively large rims result in a lower tire aspect ratio, reducing comfort. Additionally, when driving on rough roads, insufficient tire cushioning can lead to rim deformation or damage due to impact. For tires with the same tread pattern, a wider tread typically provides better grip, but it also increases fuel consumption and tire noise. Tires with a higher aspect ratio offer better cushioning capability but have poorer road feedback and weaker lateral resistance during turns. Conversely, tires with a lower aspect ratio endure greater pressure, provide very sensitive road feedback, and exhibit strong lateral resistance during turns, significantly improving handling performance.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.