What is the actual urban fuel consumption of the RAV4?

1 Answers
McElijah
07/30/25 6:22am
The RAV4 has a total of 10 models currently on sale. Among them, seven models such as the 2021 2.0L CVT two-wheel-drive Urban Edition and the 2021 2.0L CVT two-wheel-drive Fashion Edition, equipped with a 171 horsepower engine, have an NEDC fuel consumption of 5.8L per 100 kilometers. The other three models, including the 2021 modified Hybrid 2.5L CVT two-wheel-drive Elite Edition and the 2021 modified Hybrid 2.5L CVT four-wheel-drive Elite PLUS Edition, equipped with a 178 horsepower engine, have an NEDC fuel consumption of 4.7L per 100 kilometers. The fuel tank capacity of different RAV4 models varies, and the distance that can be covered with a full tank of fuel is as follows: Models equipped with a 171 horsepower engine have a fuel tank capacity of 55L, and the distance that can be covered with a full tank of fuel is 55/5.8*100=948KM. Models equipped with a 178 horsepower engine have a fuel tank capacity of 55L, and the distance that can be covered with a full tank of fuel is 55/4.7*100=1170KM. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when approaching a red light, can increase fuel consumption. The car itself: Cars with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
10
2
Share
More Forum Discussions

Why Does the Car Door Squeak?

Door squeaking is caused by wear and deformation of the door hinges and limiters, as well as dust and dirt accumulation in the gaps. Here are some additional details: 1. Over time, hinges may rust or deform. After cleaning the grease and dirt from the door hinges, limiter arm, limiter pin shaft, and connecting bracket surfaces, you can apply specialized lubricating oil. 2. Loose or deformed window regulators inside the door can cause unusual noises. 3. Unsecured or detached door trim panel clips can also lead to squeaking. 4. Car doors are connected to the body via hinges, and it's normal for hinges to make noise after prolonged use. To ensure smooth and quiet operation of the pulleys, it's recommended to apply lubricating oil every 2-3 months for maintenance.
16
5
Share

What Lights Should Be Turned On Before Entering a Highway Tunnel?

Before entering a highway tunnel, you should turn on the low beam headlights. Here is a detailed introduction about car lights: 1. Headlights: The main purpose of headlights is to illuminate the road and objects in front of the vehicle to ensure driving safety. The high beam and low beam can be alternated as a signal for overtaking at night. Headlights are installed on both sides of the front of the car, with 2 or 4 per vehicle. The bulb power is 45-60W for high beam and 25-55W for low beam. 2. Fog lights: Fog lights are installed near the headlights or slightly lower than the headlights. In conditions of low visibility such as fog, snow, heavy rain, or dust, fog lights are used to illuminate the road and provide signals to oncoming vehicles. The light is mostly yellow. Yellow light has a longer wavelength and good fog-penetrating performance. The bulb power is generally 35W.
4
3
Share

Does the DSG dry dual-clutch transmission require oil change?

dsg dry dual-clutch transmission requires oil change, here are the specific details about dsg dry dual-clutch: Oil change standard: dsg dry dual-clutch transmission requires oil change, it should be replaced every 4 years or 60,000 kilometers, with 2L of gear oil needed for each change. Gear oil: Gear oil mainly refers to the lubricating oil for transmissions. It differs from engine oil in terms of usage conditions, composition, and performance characteristics. Gear oil primarily functions to lubricate gears and bearings, prevent wear and corrosion, and assist in heat dissipation for gears. Automotive gear oil is used in gear transmission mechanisms such as vehicle steering gears, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays crucial roles in lubrication, anti-wear, cooling, and heat dissipation for gears.
15
3
Share

What brand is the Taurus car?

The Taurus car is a brand under Ford. Here is some information about Ford: 1. Introduction: Ford (Ford Motor Company) is one of the world's most renowned automobile companies and a brand under the American Ford Motor Company, founded in 1903 and headquartered in Dearborn, Michigan. 2. History: In 1913, Ford Motor Company developed the world's first assembly line, a groundbreaking innovation that enabled the production of 15 million Model T cars, setting an unprecedented world record. 3. Development: On February 4, 1922, Ford acquired the Lincoln brand. On December 1, 1989, it acquired Jaguar Cars. On January 28, 1999, Ford purchased Volvo's global car business. On June 2, 2021, Ford was ranked 21st on the Fortune 500 list of the largest American companies.
10
5
Share

What are the reasons for the Mazda 3 not responding when starting?

The Mazda 3 may not respond when starting due to the following reasons: 1. Check the battery charge, fuel pressure, and fuses in the fuse box. Issues with the starter and its wiring, especially the starter's solenoid switch, and then the ignition switch. 2. Observe if the dashboard lights dim when starting. If they dim, the battery may be dead; if there's no change, the starter might be faulty, or the ignition switch below the key slot could be defective. Below are the correct methods to start the Mazda 3: 1. Without pressing the brake, press the start button twice or use the mechanical key to power on. Wait for the instrument panel to light up and for the electrical system self-check to complete (airbag light turns off), then press the brake to start the car. 2. When shifting gears, you can directly move from P to D, but avoid pausing at R. The car can be started in either P or N gear.
13
0
Share

What Causes the Brake Lights on a Ford Mondeo to Stay On Constantly?

In most cases, the reason the Mondeo's brake lights stay on constantly is due to a burnt-out bulb. If replacing the bulb doesn't resolve the issue, check the fuse, wiring, and switch. For the headlights, you can visually inspect the color inside the bulb—if there's no discoloration or debris, the bulb is generally good. If both lights fail to work simultaneously, it's usually a switch-related problem. Additional Information: Automotive design includes three brake lights at the rear of the vehicle: left, right, and center (high-mounted light). The circuit switches for these three brake lights are connected to the brake pedal and are independent of whether the car is started or turned off. When the brake pedal is pressed, all three lights illuminate; when the pedal is released, they turn off. If the lights remain on after releasing the pedal, the fault lies in the pedal connection mechanism. If you're unsure how to fix it, seek professional repair.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.