What is the actual tested range of the Model Y Standard Range?

What are the B1 license test items?

B1 license test is divided into Subject 1, Subject 2, and Subject 3, as follows: Subject 1: The test content includes road traffic rules, traffic signals, traffic safety violations and accident handling, motor vehicle driver's license application and usage, motor vehicle registration regulations, and other road traffic safety laws, regulations, and rules. Subject 2: The test content includes large buses, tractors, city buses, medium-sized buses, and large trucks for pole tests, hill-start and stop, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, passing through width-limited gates, passing continuous obstacles, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnels, rainy (foggy) conditions, slippery roads, and emergency handling. Subject 3: The road driving skills test includes large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission passenger cars for the disabled. Test items include preparation before starting, starting, straight-line driving, gear shifting, lane changing, pulling over, passing straight through intersections, left turns at intersections, right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, U-turns, and night driving. Subject 4: Safety knowledge test. The total test time is 45 minutes, with a full score of 100, and a passing score of 90 or above. Those who fail can retake the test after 10 days. The B1 license allows driving medium-sized passenger vehicles, defined as vehicles not exceeding 6 meters in length, with a seating capacity of 10 (inclusive) to 19 (inclusive) passengers. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). Note that the B1 license does not include B2. If a B1 license holder wants to drive large trucks, they can upgrade their license to B1B2 (or A1, A2, A1A2, etc.). Application requirements: Height: Applicants for medium-sized passenger vehicles must be at least 150 cm tall. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Color vision: No red-green color blindness. Hearing: Must be able to distinguish the direction of sound sources with each ear 50 cm from a tuning fork. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement. Lower limbs: Both lower limbs must be intact with normal movement, and the length difference must not exceed 5 cm. Torso and neck: No movement dysfunction. B1 test precautions: Reverse from the starting point into the second bay and stop, then move forward and backward twice to shift into the first bay and stop correctly. Proceed forward through the second bay onto the road, reverse into the first bay and stop correctly, then exit and return to the starting point. Drive according to the specified route and sequence. The vehicle must start smoothly and must not stall or stop midway. Do not use clutch semi-engagement during vehicle movement. Do not extend the head or hands outside the vehicle or open the door to look during driving. After each start or stop, the vehicle must not roll. Do not turn the steering wheel while stationary. Strictly follow driving operation procedures. According to the "Motor Vehicle Driver's License Business Work Standards" issued by the public security department, motor vehicle driver's licenses are classified into 15 levels: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. The permitted vehicle types for each level are as follows: A1 license: Permitted to drive large passenger vehicles. A2 license: Permitted to drive tractors and heavy or medium-sized full or semi-trailer combinations. A3 license: Permitted to drive city buses with a seating capacity of 10 or more. B1 license: Permitted to drive heavy passenger vehicles. B2 license: Permitted to drive heavy or medium-sized trucks, etc. C1 license: Permitted to drive small or mini passenger vehicles, etc. C2 license: Permitted to drive

17

0

Share

What car shares the same oil filter model as the Haval M6?

Haval M6 shares the same oil filter model with Haval H2 and Haval H6. Here is the relevant information: 1. The oil filter, also known as the oil cleaner, functions to filter out impurities, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. To reduce friction between moving parts in the engine and minimize wear, engine oil is continuously supplied to the friction surfaces of moving components, forming a lubricating oil film for lubrication. 2. Engine oil inherently contains a certain amount of gum, impurities, moisture, and additives. During engine operation, metal particles, airborne contaminants, and oil oxidation products increase the impurities in the oil. If the oil is not filtered before entering the lubrication circuit, these impurities will be carried to the moving friction surfaces, accelerating part wear and reducing the engine's service life.

10

1

Share

What engine does the BYD Tang use?

BYD Tang is equipped with the BYD487QA engine. Here are the specific details: 1. The BYD Tang engine, codenamed BYD487ZQA, is a 2.0T engine independently developed by BYD. 2. The entire engine is independently produced with a vertical integration rate of up to 90%. It features exhaust gas turbocharging, an all-aluminum engine, dual variable valve timing, direct fuel injection, dual balance shafts, and an intercooler in the intake manifold. Many core components are supplied by top-tier brand suppliers such as BorgWarner and Bosch. 3. In terms of power parameters, the maximum power is 151 kW, and the maximum horsepower is 205 PS. The torque of this engine is also a highlight, reaching up to 320 N·m, and it can deliver full torque power at just 1750 rpm.

1

2

Share

What is the minimum ground clearance of the MG HS?

The minimum ground clearance of the MG HS is 175mm. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the car is fully loaded and stationary. It is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The MG HS is a compact SUV launched by SAIC Motor, with body dimensions of 4574mm in length, 1876mm in width, and 1664mm in height, and a wheelbase of 2720mm. The MG HS is equipped with 1.5T and 2.0T engines, with maximum power outputs of 169 horsepower and 231 horsepower respectively. The transmissions paired with these engines are a 7-speed dual-clutch and a 6-speed dual-clutch gearbox respectively.

5

4

Share

Where is the oxygen sensor located in the old Passat?

The oxygen sensor in the old Passat is located on the exhaust manifold, with one in front of the catalytic converter and another behind it. The front oxygen sensor detects the oxygen content in the exhaust, sending signals to the ECU, which then adjusts the air-fuel ratio. If the catalytic converter is damaged, a warning light will appear on the dashboard, indicating the need for replacement. The catalytic converter is a crucial component on the exhaust manifold, reducing pollutant levels in the exhaust, which benefits environmental protection. The old Passat is a mid-size car produced by SAIC Volkswagen, with body dimensions of 4870mm in length, 1834mm in width, 1472mm in height, and a wheelbase of 2803mm.

13

1

Share

Where is the cabin air filter located in the Peugeot 508?

The cabin air filter in the Peugeot 508 is located at the bottom of the center console next to the accelerator pedal, and it can be seen after removing the central cover. The cabin air filter is a filter installed in the car's air conditioning system, which can absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system. The Peugeot 508 has body dimensions of 4826mm in length, 1855mm in width, and 1465mm in height, with a wheelbase of 2815mm. The Peugeot 508 is equipped with either a 1.6T turbocharged engine or a 1.8T turbocharged engine. The 1.6T engine has a maximum power output of 125 kW and a maximum torque of 250 Nm, while the 1.8T engine has a maximum power output of 155 kW and a maximum torque of 300 Nm.

1

3

Share

What is the actual tested range of the Model Y Standard Range?

What are the B1 license test items?

What car shares the same oil filter model as the Haval M6?

What engine does the BYD Tang use?

What is the minimum ground clearance of the MG HS?

Where is the oxygen sensor located in the old Passat?

Where is the cabin air filter located in the Peugeot 508?

What brand is the transmission of the Mazda 8?

What are the body dimensions of the Land Cruiser?

Is the DS7 an imported car?

Is the Cadillac CT5 fuel-efficient?