What is the actual range of the Volkswagen ID4?

2 Answers
VonHayden
09/02/25 5:53am
The actual range of the Volkswagen ID4 is approximately 450 kilometers. Pre-departure vehicle inspection: Before setting off each day, conduct a comprehensive inspection of the vehicle, including checking for oil or water leaks, measuring tire pressure to ensure it is appropriate, inspecting the engine oil condition to verify its color is normal and the oil level is correct. Safe driving: Use seat belts correctly; their protective effect during a severe collision is no less than that of airbags. Avoid fatigue driving and take a break every 2 hours. Traffic rule compliance: Especially on highways, do not speed. Speeding not only risks traffic police penalties but, more importantly, is unsafe.
Was this review help?
4
4
Share
SpencerFitz
09/14/25 7:57am
I've been driving the Volkswagen ID.4 for over a year. The official claim is about 520 kilometers of range, but in actual use, it's far from achievable. For daily urban commuting, it's usually around 350-400 kilometers. On highways, especially at higher speeds or with strong wind resistance, the range can drop below 300 kilometers. In winter, using the heating system consumes a lot of electricity, reducing the range even more. To save power, I use the eco-driving mode, avoid sudden acceleration, and always maintain standard tire pressure, which helps extend the range a bit. Before weekend trips with my kids, I check the remaining range and charging points on the app to ensure safety. Overall, the actual range varies from person to person, but developing good driving habits makes it more practical.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

How to Remove the Rear Seat of the Nissan Sylphy Classic?

The method for removing the rear seat of the Nissan Sylphy Classic is as follows: 1. Reach under the seat cushion and forcefully lift the front part upward until the front hooks are released. This action needs to be performed once on both the left and right front sections; 2. After lifting the front part, insert your left hand under the side, push the seat cushion toward the backrest with your right hand, and while pushing it in slightly, use your left hand to lift the rear part. This action also needs to be performed once on both the left and right sides; 3. After removing the seat cushion, unscrew the three screws under the rear backrest, lift it upward, and the rear backrest can be removed.
9
0
Share

How to Replace the Rear Wiper on a Ford Kuga?

Ford Kuga rear wiper replacement steps: 1. First lift the wiper arm to engage its self-locking mechanism. 2. Then use your right hand to pinch the two dovetail clips. 3. Rotate the wiper blade at a certain angle and pull it upward to remove. 4. Install the new wiper blade by aligning its front notch with the small head of the wiper arm, then pull the blade downward while pinching the two dovetail clips. 4. Rotate the blade clockwise at a certain angle to secure it in position. 5. After confirming proper installation, gently place the wiper arm back onto the windshield. 6. Use the same method to replace the driver-side wiper blade.
6
3
Share

How to Install the Clutch Pedal Spring on a Ford Focus?

The clutch pedal spring of a Ford Focus cannot be installed by yourself and requires professional installation at a repair shop. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and transmission, thereby cutting off or transmitting the power input from the engine to the transmission. The Ford Focus is a compact car under the Ford brand. In terms of body dimensions, the car measures 4647mm in length, 1810mm in width, and 1468mm in height. In terms of power, the Ford Focus is equipped with two engines: a 1.0T and a 1.5T. The 1.0T engine has a maximum power output of 94kw, while the 1.5T engine has a maximum power output of 135kw.
14
3
Share

How to fold down the rear seats of a Volvo S60?

To fold down the rear seats of a Volvo S60, follow these steps: Open the trunk, pull the rear seat release lever labeled 'Release' located at the upper center of the trunk backward, then open the rear door and fold down the rear seats from inside the car. There are two ways to fold down the rear seats of a Volvo S60: 1. Split-folding: When folding down by proportion, the flexibility of the rear seats increases. You can fold down only half of the backrest to accommodate large items while the remaining part can still seat passengers. 2. Full-folding: When folding down entirely, the rear space expands, but it cannot seat passengers.
1
0
Share

Where is the radar switch for the eighth-generation Camry?

Shifting into reverse gear activates the reverse parking radar. The reverse parking radar utilizes ultrasonic principles during reversing. The sensors installed on the rear bumper emit ultrasonic waves that reflect off obstacles, calculating the actual distance between the vehicle and the obstacle, then providing feedback to the driver to make parking or reversing easier and safer. Below is relevant information about reverse parking radar: 1. Ultrasonic sensors: Their main function is to emit and receive ultrasonic signals. 2. Controller: Processes the signals to calculate the distance and direction between the vehicle and obstacles. 3. Display or buzzer: When the sensors detect that the vehicle is at a dangerous distance from an obstacle, the system alerts the driver through the display and buzzer.
15
4
Share

Does the Volkswagen Phideon have air suspension?

Volkswagen Phideon is equipped with air suspension. Working principle of air suspension: The air suspension system mainly consists of control computer, air compressor, pressure storage tank, pneumatic front and rear shock absorbers, and air distributor. Functions of air suspension: Body level control, body level adjustment, and ADS function are achieved by using the air compressor to generate compressed air, which is then delivered to the air chambers of springs and shock absorbers. Height sensors are installed near the front and rear wheels. Based on the output signals from these height sensors, the vehicle computer determines changes in vehicle height, then controls the compressor and exhaust valve to compress or extend the springs, thereby achieving shock absorption effects and altering the vehicle's height.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.