What is the actual range of the Han EV?

Should the Clutch Be Fully Depressed for Hill Start?

Hill start requires fully depressing the clutch. Below is relevant information about the clutch: 1. Definition: The clutch is installed between the engine and the transmission, serving as the assembly component in the vehicle's drivetrain that directly connects to the engine. Typically, the clutch is mounted together with the engine crankshaft's flywheel assembly, acting as the component that cuts off and transmits power between the engine and the vehicle's drivetrain. 2. Working Principle: When the diaphragm spring is installed between the clutch cover and the pressure plate, it creates a pre-compression deformation that generates pressure on the pressure plate, pressing the clutch's driving and driven parts together, meaning the clutch is in the engaged state. 3. Function: Ensures smooth vehicle start-up and gradually synchronizes the speed of the meshing parts of the new gear pair.

9

2

Share

What is the effect of car crystal coating?

Car crystal coating has the following effects: 1. A protective layer is formed on the surface through the action of high molecular polymers, which has functions such as UV resistance, oil resistance, low surface energy, and hydrophobicity. 2. Car crystal coating provides reliable paint surface sealing technology, offering efficient and long-lasting protection to the car paint, preventing environmental factors from affecting the color of the paint. A water droplet experiment showed that after 6 months of use, the car paint surface remained perfectly intact. 3. Compared to ordinary car paint with a hardness of 2H, car crystal coating can prevent most minor scratches and has an elastic recovery function, protecting the vehicle from daily minor scratches and reducing paint surface scratches by more than 70% compared to ordinary coatings.

2

5

Share

Do You Need to Turn on AC When Using the Heater in Winter?

No, you don't need to turn on the AC because the car's heating system utilizes the engine's own heat to produce warm air for heating purposes. Here's the proper way to use the car heater: 1. When the engine has just started in winter, the coolant temperature is still low. Turning on the air conditioning at this point won't quickly warm up the cabin but will instead increase the engine's workload and delay its normal temperature rise. 2. After starting the car, wait approximately 8-15 minutes until the coolant reaches normal operating temperature (typically around 70°C), then you can turn on the heater. 3. There's no need to activate the AC switch when using the heater as this would engage the compressor (which provides cooling).

17

5

Share

What engine is used in the BYD G5?

BYD G5 is equipped with a 1.5-liter turbocharged engine across the entire lineup. More details about the BYD G5 are as follows: 1. The 1.5-liter turbocharged engine in the BYD G5 delivers 154 horsepower and a maximum torque of 240 Nm. It can output maximum power at 5200 rpm and maximum torque between 1750 and 3500 rpm. 2. The engine of the BYD G5 features variable valve timing technology and uses an aluminum alloy cylinder head and block. This engine is paired with either a 6-speed manual transmission or a 6-speed dual-clutch transmission. The dual-clutch transmission offers high transmission efficiency and fast gear shifting, making it suitable for use with small-displacement turbocharged engines.

9

2

Share

Should Wheel Balancing Be Done on Two or Four Wheels?

Wheel balancing is typically performed on two wheels. Below is relevant information about wheel balancing: 1. Definition: Wheel balancing refers to dynamic balancing, a concept in rotor dynamics not exclusive to automobiles. All rotating components face dynamic balancing issues. The process of eliminating this imbalance by identifying deviation values and adding counterweights is called wheel balancing. 2. Effects: If front wheel balancing is poor, tires may oscillate laterally during high-speed driving, causing steering wheel vibration that can make palms feel numb in severe cases; If rear wheel balancing is problematic, it may cause vehicle body sway at high speeds, creating safety hazards; Poor wheel balancing generally results in significantly more intense vibration during driving compared to normal conditions.

10

5

Share

What is the proper oil level on the dipstick?

The most ideal oil level is when it is between the MIN and MAX marks on the dipstick, indicating that the engine has just the right amount of oil. Here’s how to check the oil level using the dipstick: 1. First, locate the dipstick handle in the engine compartment and prepare a piece of tissue. 2. Pull out the dipstick and use the tissue to wipe off as much oil as possible from the dipstick head. Then, check the position of the oil mark on the dipstick (usually marked with MIN and MAX). 3. Reinsert the cleaned dipstick all the way back into its place, ensuring it is fully seated, then pull it out again. 4. Observe the oil mark on the dipstick to determine the highest oil level in the engine.

4

3

Share

What is the actual range of the Han EV?

Should the Clutch Be Fully Depressed for Hill Start?

What is the effect of car crystal coating?

Do You Need to Turn on AC When Using the Heater in Winter?

What engine is used in the BYD G5?

Should Wheel Balancing Be Done on Two or Four Wheels?

What is the proper oil level on the dipstick?

Differences between Koleos and X-Trail?

What are the hazards of stalling a manual transmission car?

Where is the engine oil pump installed?

What are the body dimensions of the 2020 Honda City?