What is the actual range of the BAIC EC3?

2 Answers
AsherLee
07/25/25 6:45am
The BAIC EC3 has a comprehensive driving range of 261 kilometers under standard conditions and supports both fast and slow charging. Below is additional information about the BAIC EC3: 1. Exterior: The BAIC New Energy EC3 features a completely redesigned urban CROSS style, available in four exterior colors: blue, white, orange, and red. The lines around the front grille logo have been reworked, with extended lines that flow into the headlights, connecting with the LED daytime running lights. Each side is equipped with five vertically arranged LED lights. 2. Body dimensions: The length, width, and height are 3675mm * 1630mm * 1518mm respectively, with a wheelbase of 2360mm.
Was this review help?
14
5
Share
OBryce
08/10/25 6:16pm
I bought a BAIC EC3 last year, mainly for commuting in the city. The official range is about 270 kilometers, but the actual performance falls short. I've tested it several times with full charge and AC on—it managed just over 220 km in summer, and worse in winter, dropping below 200 km. Turning on the AC really drains the battery quickly. It's sufficient for daily commutes, but long trips require careful charging station planning. I recommend gentle driving and avoiding sudden acceleration to save power. Also, battery maintenance is crucial—regular checks and avoiding deep discharges can help extend the range. Overall, the real range is lower than advertised, roughly between 200-250 km, depending on driving habits and weather conditions.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How Long Does It Take to Replace a Driver's License?

If all requirements are met, the vehicle management office should reissue the motor vehicle driver's license within one day. Important notes for replacing a driver's license include: 1. Replacement locations: It can be processed at the vehicle management office, traffic police detachment, or driver's license service points, and can also be handled in a different location. Non-local individuals can go to the overseas management window of the vehicle management office. 2. Required documents: Application form for motor vehicle driver's license, lost certificate of motor vehicle driver's license, original and photocopy of ID card (only the photocopy is collected, the original is for verification), and two 1-inch photos. 3. Before applying for a replacement, ensure that: You have not accumulated 12 penalty points in a single scoring cycle; all traffic violation records have been properly handled, with no unpaid tickets.
6
5
Share

What is the recommended tire pressure in kPa for cars?

Standard tires: 2.4-2.5 bar. Reinforced tires: 2.8-2.9 bar. Maximum pressure: should not exceed 3.5 bar. Methods of tire pressure monitoring: 1. Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure, transmitting pressure information from inside the tire to a central receiver module via wireless transmitters, then displaying the pressure data for each tire. The system automatically alerts when tire pressure is too low or there's a leak. 2. Indirect tire pressure monitoring: The working principle of indirect tire pressure monitoring is: when a tire's pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller, making it rotate faster than other wheels. By comparing rotational speed differences between tires, it monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating tire rolling radius to monitor pressure.
14
0
Share

Why is the engine malfunction indicator light on?

There are various reasons that can cause the engine malfunction indicator light to illuminate: sensor malfunctions, spark plug issues, ignition coil problems, fuel pump failures, fuel line blockages, etc. When the engine malfunction light comes on, it can be categorized into three scenarios, each requiring a different response: 1. The car cannot start: This may be caused by a fuel pump or ignition component failure, and repair is recommended. 2. The malfunction light is on, but there are no noticeable abnormalities while driving: This might just be a sensor malfunction, and you can continue driving temporarily, but it's best to drive at low to medium speeds. 3. The engine malfunction light is on, and the vehicle can still be driven, but exhibits severe shaking, lack of acceleration power, etc.: In this case, you should not continue driving.
8
1
Share

What to Do When the Seat Belt Gets Stuck?

When the seat belt gets stuck, check the hinge or locking mechanism of the seat belt to see if there is any dust or foreign matter. Precautions for using seat belts: 1. Check the condition of the seat belt: If any damage or other issues are found, it should be replaced immediately. 2. One belt per person: The seat belt should be fastened across the hips and chest, spanning the pelvis and rib cage, and is for individual use only. Two people should not share one seat belt. 3. Avoid pressing on hard or fragile objects: The seat belt should not press against hard or fragile items, such as mobile phones or glasses. 4. Retract and store properly: When the seat is unoccupied, the seat belt should be retracted back into the retractor, and the buckle should be placed in the storage position.
15
5
Share

How many days in advance can I renew my driver's license?

Driver's license renewal can only be processed 90 days in advance. Please note the following points: 1. Prepare relevant materials in advance: Have all required documents ready, including original and photocopy of ID card, physical condition certificate, temporary residence permit for non-local residents, etc. 2. Processing hours: Monday to Friday. 3. Fee standards: A processing fee of 20 yuan is charged for driver's license renewal. 4. Whether proxy service is needed: If you are in another city, you can authorize someone else to handle the renewal. For proxy services, the authorized person's ID card and power of attorney are required.
1
4
Share

What Happens If You Sleep in a Car with the Engine Off and Windows Closed?

It can lead to oxygen deprivation. When a car is stationary, the air inside and outside the vehicle struggles to circulate. The carbon monoxide emitted by the prolonged operation of the engine may gradually accumulate inside the car. Additionally, the occupants' breathing consumes oxygen and releases carbon dioxide. Over time, the oxygen level inside the car decreases, and occupants may unknowingly suffer from poisoning and lose consciousness, which can be fatal in severe cases. Here are some precautions for sleeping in a car: 1. Switch to the external air circulation mode: Many car owners have the habit of using the internal circulation mode to maintain the temperature and air quality inside the car, which is not wrong. However, to ensure proper air circulation while resting, it is recommended to switch to the external circulation mode. 2. Neither the air conditioning nor the heater can replace an air purifier: While some vehicles are equipped with air purification functions, they are rare. The car's air conditioning and heater are not air purifiers. Therefore, do not assume that keeping the air conditioning or heater on while sleeping will prevent poisoning. Even if an air purifier has been installed, it is still advisable to ensure proper ventilation. 3. Open the windows for ventilation: If you want to maintain air circulation, opening the windows is the most straightforward method. Leaving a small gap can also facilitate air movement.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.