What is the actual measured fuel consumption of the VV7?

1 Answers
DeRichard
07/30/25 9:46am
VV7 actual measured fuel consumption is 13.3L/100km. The real-time fuel consumption of the Great Wall VV7 is constantly changing, and the longer the idling time, the higher the fuel consumption, which can even reach 30~70L. Relevant information is as follows: 1. The VV7 is positioned as a high-end urban SUV. 2. Since the vehicle often experiences various working conditions such as acceleration, deceleration, braking, and engine idling during actual driving, the constant-speed fuel consumption is often lower and significantly different from the actual fuel consumption. This difference is even more pronounced for vehicles frequently used for short-distance urban driving. 3. The fuel consumption per 100 kilometers indicated in the manuals of domestic vehicles is generally the constant-speed fuel consumption.
Was this review help?
9
0
Share
More Forum Discussions

What are the reasons for the failure of the Verna camshaft sensor?

Verna camshaft sensor failure is caused by 1. improper sensor installation; 2. aging sensor components or poor-quality sensor parts. The function of the camshaft position sensor is to collect the position signal of the valve camshaft and input it to the ECU, so that the ECU can identify the top dead center of cylinder 1 compression, thereby enabling sequential fuel injection control, ignition timing control, and knock control. The camshaft position sensor is also called the cylinder identification sensor. It can accurately determine the position of each cylinder's piston. The role of the camshaft position sensor is to control the engine's ignition timing and fuel injection timing by collecting the camshaft's angle signal.
1
4
Share

Reasons for Malfunctioning Corolla Air Conditioning Control Panel?

There are two main reasons for the control panel not working: issues with the panel itself or problems with the control panel's circuit power supply. Panel-related issues: If the relevant modules inside the control panel assembly malfunction, the panel needs to be replaced. Control panel circuit power supply issues: If the power circuit of the control panel is open, the control panel will display nothing at all; if the power supply voltage is insufficient due to poor contact or oxidized wiring in the control panel assembly's power circuit, this phenomenon may also occur. In such cases, it is necessary to inspect and repair the areas with poor contact in the power circuit.
1
4
Share

What is the engine displacement of the Tianlong 450?

Tianlong 450 is equipped with an 11-liter engine. Introduction to automotive engines: The automotive engine is the power-generating device of a vehicle, serving as the heart of the car, determining its power performance, fuel efficiency, stability, and environmental friendliness. Reasons for warming up the engine: The primary reason for warming up the engine is that after prolonged parking, the engine oil flows back to the oil pan at the bottom of the engine. Therefore, warming up is essential. The correct method for warming up is to start driving 30 seconds to one minute after ignition, but avoid high-speed driving during this period. Maintain low speed with engine RPM not exceeding 3000-3500, generally keeping it around 2000 RPM.
5
4
Share

Does a 7-year-old car require annual inspection?

Annual inspection is required. 1. Non-commercial passenger vehicles: New vehicles within 6 years are exempt from on-site inspection, requiring only biennial inspection mark applications; Private cars registered after September 2012 that meet the requirements can enjoy the exemption policy, followed by annual inspections. Vehicles aged 6 to 15 years require annual on-site inspections, while those over 15 years need semi-annual on-site inspections. 2. Commercial passenger vehicles: Annual inspection is required for the first 5 years; Beyond 5 years, inspections are required every 6 months. 3. Trucks and large/medium-sized non-commercial passenger vehicles: Annual inspection is required for the first 10 years; Beyond 10 years, inspections are required every 6 months.
3
5
Share

Is there any place in Daqing that replaces catalytic converter substrates?

Daqing can replace catalytic converter substrates Symptoms of a clogged catalytic converter: If the catalytic converter is clogged, the rear oxygen sensor will detect insufficient oxygen content in the exhaust, mistakenly judging the mixture as too rich. This leads to reduced fuel injection, making the mixture too lean and causing symptoms like poor acceleration. In such cases, the engine malfunction indicator light usually illuminates. Timely repair for a clogged catalytic converter: A damaged catalytic converter significantly impacts the engine, so timely repair is essential. If it's just clogged, cleaning may suffice. However, if it's poisoned, failed, or broken, replacement is necessary.
10
5
Share

Do I need to report to the DMV for car wrap installation?

Invisible car wraps do not require reporting to the DMV, while color-changing films applied to the car body need to be registered with the DMV. Below are the required materials and procedures for registration: 1. ID card, vehicle license, and vehicle registration certificate: After applying the color-changing film or completing the paint job, bring your ID card, vehicle license, and vehicle registration certificate. 2. Traffic Management Office: Within 10 days, drive the vehicle to the local Traffic Management Office for registration. After filling out the vehicle registration form and completing other procedures, the DMV staff will conduct an on-site inspection of the vehicle and take photos. Once the inspection is passed and archived, a new vehicle license will be issued to the owner, completing the entire registration process.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.