What is the actual measured fuel consumption of the Lynk & Co 05?

3 Answers
OBeckett
07/24/25 3:01pm
The official MIIT fuel consumption of the Lynk & Co 05 is 9.5L per 100 kilometers. Here is some related information about the Lynk & Co 05: 1. Lynk & Co 05: It is a compact SUV under the Lynk & Co brand, with a wheelbase of 2734mm, and dimensions of 4592mm in length, 1879mm in width, and 1628mm in height. 2. The Lynk & Co 05 is equipped with: A 2.0-liter turbocharged engine. Its maximum power is 187kW, and the maximum torque is 350 Nm. The engine's maximum torque is achieved between 1800 and 4800 rpm, and the maximum power is reached at 5500 rpm. 3. The front suspension of the Lynk & Co 05: Uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link independent suspension is an improvement based on the double-wishbone suspension, where the two wishbones are replaced with separate links.
Was this review help?
20
3
Share
McJoel
08/10/25 7:14am
As a veteran SUV driver who has test-driven the Lynk & Co 05, I can say that actual fuel consumption heavily depends on driving habits. During my daily urban commute in traffic, consumption reaches about 10L/100km, while highway driving brings it down to around 7L. On average, it works out to 8.5L/100km - slightly higher than the official 7.2L rating. The reasons? Frequent acceleration from stops in city driving demands more engine response, and air conditioning use adds to consumption. I recommend using cruise control more often and avoiding sudden braking - this approach saved me 100-200 yuan monthly in fuel costs. For accurate measurement, use an app to track fuel fill-ups and mileage over at least 100km. While not the most fuel-efficient, its consumption is acceptable given the performance. Key maintenance points: regular tire checks and air filter replacements.
Was this review help?
10
3
Share
Expand All
MacValeria
09/25/25 7:10am
As a tech-savvy car enthusiast who frequently tinkers with automotive apps, I've tested the fuel consumption of the Lynk & Co 05 and found it quite realistic. Using OBD tools and mobile apps to record data several times, I observed urban commuting during peak hours reaching 11 liters per 100 km, while highway cruising dropped to just over 6 liters. Actual measurements averaged around 8.8 liters, slightly higher than the WLTP test values, indicating that real-world driving conditions are more demanding. Among the influencing factors, traffic congestion is the biggest issue – engine load increases significantly at low speeds, causing fuel consumption to spike. I've compared it with other SUVs like the Honda CR-V, which showed similar real-world performance. I recommend activating Eco mode while driving, as my tests showed it can reduce consumption by about 0.5 liters. After long-term tracking, I noticed higher fuel consumption in low temperatures, possibly due to changes in oil viscosity. Overall, this car isn't a gas guzzler, but you should rely on your own measurements rather than just trusting the official website figures.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

What is the difference between Pirelli P1 and P6?

The differences between Pirelli P1 and P6 are as follows: 1. The rolling resistance of P6 is lower than that of P1, and lower rolling resistance means better fuel efficiency. 2. Pirelli P1 is a high-performance tire that offers safety and wear resistance. It uses high-performance hybrid materials and an asymmetric tread pattern design, which not only improves the tire's wear resistance and grip but also enhances its drainage capability to some extent. Additionally, the new Pirelli P1 features a five-layer crown structure, consisting of two layers of steel wire, two layers of polyester fiber, and one layer of IKEA polyamide (nylon), while the sidewall has two layers of polyester fiber, effectively preventing severe wear caused by tire bulging. 3. Pirelli P6 is a high-performance tire that prioritizes comfort and fuel efficiency. It employs a unique tread compound combined with a new vulcanization process to reduce rolling resistance, significantly improving the vehicle's fuel economy. Furthermore, its specially designed audio tuning pattern effectively reduces tire noise during driving, providing a more comfortable driving experience.
16
5
Share

What are the considerations for applying a gecko sticker to the rear of a car?

There are no specific methods for applying a gecko sticker to the rear of a car. You just need to align the position first and then stick it directly. You can hold the gecko sticker to check the position. The reasons for applying a gecko sticker to the rear of a car are as follows: 1. Auspicious homophony. The homophonic meaning of 'gecko' in Chinese is 'protection' or 'avoiding misfortune,' hoping to gain protection or avoid misfortune. This is why people stick a 'gecko' on the rear of their cars, believing that traffic violations and accidents will stay away, which also benefits driving safety. 2. Mascot. The gecko is also known as 'Shou Gong' in Chinese, and in traditional Chinese culture, it is called 'Tian Long' (Heavenly Dragon). It is considered a mascot by the folk to ward off evil spirits and bring prosperity to the family. 3. Strong ground adhesion. Geckos walk on dangerous walls relying on the strong adhesion of their limbs. At the same time, the gecko emblem originally represented Audi's quattro all-wheel-drive logo on Audi cars, symbolizing the vehicle's strong ground adhesion similar to that of a gecko. 4. Reminder for the following car. Geckos are reptiles, and their crawling speed is slow. Using the crawling speed of a gecko to represent the vehicle's own driving speed is intended to remind the driver behind to pay attention to the speed and drive carefully.
3
3
Share

Can you drive on highways without ETC installed in 2021?

It is possible to drive on highways without ETC. According to the regulations of the State Council, starting from 2020, vehicles without ETC cannot enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they must be activated before normal use. During free holiday periods, highways can still be used. For users who have already installed ETC, passing through ETC lanes will not incur charges. ETC charging principle: There will be one or more ETC lanes on highways. Through microwave dedicated short-range communication between the vehicle's electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, the purpose of paying tolls without stopping at road and bridge toll stations is achieved. All of this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Cost-saving: Reduces expenses, decreases the frequency of vehicle starts and brakes, and lowers wear and fuel consumption. Improved efficiency: The theoretical efficiency of ETC lanes can be increased by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also explicitly set the goal of "achieving a 50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of the "13th Five-Year" comprehensive transportation development plan. More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC passenger vehicle usage rate, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with vehicle-to-vehicle communication, vehicle-road coordination, and other smart transportation development directions, providing comprehensive travel services for car owners. This means more application scenarios will support ETC applications.
17
4
Share

What is the solution for the Ford Focus transmission warning light coming on?

Ford Focus transmission warning light coming on solution is: 1. Computer diagnosis, replace damaged electronic components; 2. Repair damaged mechanical components; 3. Inspect and repair engine and ABS; 4. Clean transmission valve body, replace transmission fluid; 5. Check for transmission fluid leaks; 6. Inspect and repair sensor wiring connections. Taking the 2021 Ford Focus as an example, it is a compact car with body dimensions of: length 4647mm, width 1810mm, height 1468mm, wheelbase 2705mm, fuel tank capacity 53L, and curb weight 1245kg.
10
0
Share

How to Activate the Auto-Lock Function?

Auto-lock function activation method is: 1. Shift to P position; 2. Turn key to ON position with all doors closed; 3. Press the lock button; 4. Observe hazard warning lights flashing twice on instrument panel; 5. Auto-lock function activation completed. The auto-lock while driving (also called speed-sensing auto-lock) is an electronic device that automatically engages door locks when vehicle speed reaches a preset value, preventing accidental door opening. This security feature provides anti-theft protection by quickly locking doors after starting, helping prevent potential door-pull robberies during traffic jams or at traffic lights.
18
2
Share

How to Obtain a Motor Tricycle License?

Steps to obtain a motor tricycle license: Step 1: Undergo a medical examination at a hospital qualified by the Provincial Health Department. Step 2: Register at a driving school with the medical examination form. Step 3: Study traffic regulations and take the first subject test. Step 4: Train in field driving skills and take the second subject test. Step 5: Train in road driving skills and take the third subject test. Upon completing these steps and passing all tests, you will receive your driver's license. Additionally, motorcycle license applicants can take the first, second, and third subject tests on the same day, reducing the number of trips and waiting time for applicants.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.