···
Log in / Register

What is the actual measured fuel consumption of the Edge?

3 Answers
LaCharlie
08/26/25 5:57am
The Edge currently has four models on sale: the 4WD Zongxiang Edition, 4WD Jiaxiang Edition, 4WD Yaoxiang Edition, 2WD Yaoxiang Edition, 2WD Youxiang Edition, and 2WD Conghui Jiaxiang Edition. For the three 4WD models (Zongxiang, Jiaxiang, and Yaoxiang Editions), the NEDC fuel consumption is 7.6L per 100km. For the three 2WD models (Yaoxiang, Youxiang, and Conghui Jiaxiang Editions), the NEDC fuel consumption is 7.3L per 100km. All Edge models have a fuel tank capacity of 63L. The distance that can be covered on a full tank of fuel is as follows: For the three 4WD models (Zongxiang, Jiaxiang, and Yaoxiang Editions), the distance is 63/7.6*100=829km. For the three 2WD models (Yaoxiang, Youxiang, and Conghui Jiaxiang Editions), the distance is 63/7.3*100=863km. Vehicle fuel consumption is directly influenced by five main factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as rapid acceleration, frequent overtaking, and not easing off the throttle before stopping at a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel because larger displacements typically produce more power, requiring more gasoline to burn and perform work. Heavier vehicles also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine control unit may command higher idle speeds to warm up the engine, further increasing fuel consumption.
Was this review help?
7
0
Share
LaCorey
09/08/25 8:30am
I've been driving a Ford Escape for almost two years, mainly for daily commuting. The actual fuel consumption in the city is around 10L/100km, sometimes jumping above 11L when stuck in traffic or using AC in summer. It's much more fuel-efficient on highways, staying steady at 7-8L. There are many influencing factors, such as frequent traffic lights consuming fuel faster, and higher consumption from frequent short trips without warming up the engine. I make a habit of filling up the tank and recording the mileage to calculate the average. It's recommended to gently press the accelerator during the break-in period of a new car and avoid sudden acceleration; regular maintenance like changing engine oil and air filters helps maintain low fuel consumption. In fact, fuel consumption varies significantly with different configurations, with the 1.5T engine being slightly more economical than the 2.0T.
Was this review help?
16
5
Share
Expand All
MaximusAnn
10/22/25 8:37am
As a car enthusiast, I've conducted real-world tests on several configurations of the Edge. The 1.5T version averages 8.5-10.5L/100km in mixed conditions, while the 2.0T version is slightly higher, reaching around 11L in urban areas. On highways at steady speeds, it drops to 6.8-7.5L. Actual test data often exceeds the official claimed 7-8L due to real-world factors like traffic congestion and varying loads. Influencing factors include engine type, vehicle weight, and weather conditions. It's recommended to check tire pressure before each drive, as softer tires improve fuel efficiency; using eco mode and avoiding aggressive throttle inputs also helps. While test results vary significantly, an average of 8-9L is within a reasonable range.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What is the standard for the hanging sequence of safety warning signs?

According to Clause 9.5 of the Safety Signs and Guidelines for Use (GB2894-2008): When multiple signs are set up together, they should be arranged in the order of warning, prohibition, instruction, and prompt types, from left to right and from top to bottom. Relevant information about traffic signs is as follows: 1. Introduction: Traffic signs are road facilities that convey guidance, restrictions, warnings, or instructions through text or symbols. They are also known as road signs or road traffic signs. 2. Importance: In traffic signs, safety is generally prioritized. Setting up eye-catching, clear, and bright traffic signs is an important measure for implementing traffic management and ensuring road safety and smooth traffic flow.
10
3
Share

What Qualifications Are Needed to Install a Charging Pile?

Installation of a charging pile requires the following conditions: 1. A fixed parking space in the residential area and prior communication with the property management. 2. Submission of relevant materials to the local power company to apply for an electricity meter. 3. Verification of whether the parking space can be connected to the State Grid's power lines. The process for installing a home electric vehicle charging pile includes: 1. Confirming charging conditions: First, determine if there is a fixed parking space in the community and whether the property management agrees to the installation. 2. Applying for a power supply plan: After signing the car purchase contract, you or the 4S dealership can submit an electricity application to the local power company. Once the power company provides a power supply plan, complete the necessary procedures within the validity period. 3. Installation and construction: After the power supply plan is confirmed, charging facility construction can proceed. It is important to ensure that the charging pile model meets national requirements and to choose the most suitable charging equipment for your electric vehicle brand. 4. Applying for inspection: After the charging pile installation is completed, you can apply for an inspection with the power company. Upon passing the inspection, the power company will complete the meter installation and power connection.
7
4
Share

How many oil sensors does the Passat B5 have?

Passat B5 has two oil sensors. Introduction to oil sensors: The oil pressure sensor in a vehicle is a crucial device for monitoring the engine's oil pressure. The data collected helps ensure the engine operates normally. Classification of oil sensors: Generally, oil-related sensors include the oil temperature sensor, oil level sensor, and oil pressure sensor. The oil temperature sensor primarily transmits oil temperature signals to the ECU, allowing it to determine if the engine oil temperature is too high. The oil level sensor detects the quantity of oil, while the oil pressure sensor checks whether the engine oil pressure after startup is within the specified range. If the oil pressure deviates from the specified value, the warning light on the instrument cluster will illuminate.
4
1
Share

Can the rear seats of the new BMW 3 Series be folded down?

The rear seats of the new BMW 3 Series can be folded down. There are two levers in the trunk that control the folding of the left and right seats respectively. Seat Maintenance: Remove protective plastic bags promptly: The leather seats of new cars are protected by plastic bags. After taking delivery of the car and confirming that there are no issues during inspection, the plastic bags should be removed as soon as possible to avoid affecting the breathability of the leather seats. Be careful when removing them to avoid damaging the seats. Installation Precautions: Avoid installing car safety seats on front seats equipped with airbags. If installation is necessary, the passenger airbag must be deactivated, as deploying airbags may potentially harm children.
16
0
Share

Where is the compressor relay for the Mercedes-Benz C200 located?

The compressor relay for the Mercedes-Benz C200 is located in the front fuse box under the hood. Compressor relay main body: Also known as an intermediate relay, it is used in relay protection and automatic control systems to increase the number and capacity of contacts. Compressor relay characteristics: It can only be used in control circuits. It does not have main contacts due to its relatively low overload capacity. Compressor relay purpose: Used to transmit intermediate signals in control circuits. Control method: A simple control method involves connecting the control terminal of the air conditioning relay in series with the fan speed switch, AC switch, pressure switch, or temperature switch, and connecting the output terminal in series with the compressor engagement coil of the distributor.
2
0
Share

Can the headlights of Volkswagen Santana Vista be replaced with LED lights?

The headlights of Volkswagen Santana Vista can be replaced with LED lights. Benefits of switching to LED car lights: Long lifespan: Lasts 50,000 to 100,000 hours, generally no need for replacement during the vehicle's lifespan. Cost-saving: Original bulbs are incandescent, consuming 21 watts each; LED lights consume just over 1 watt each. The entire vehicle saves over 100 watts, reducing electricity consumption which translates to fuel savings, saving approximately 100 liters of fuel over five years. Proper use of LED lights: Proper use of LED lights (especially proper temperature control) can effectively extend their expected lifespan. Conversely, if the temperature is too high, LED lights can be easily damaged.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.