What is the actual fuel consumption per kilometer for the Haval M6?

2 Answers
MaddoxLee
07/24/25 9:48am
The Haval M6 has a total of 9 models currently on sale. Among them, the 2021 PLUS-1.5T manual Liu Yan co-branded edition, manual Elite Smart Connect, manual Luxury Smart Connect, and manual Comfort models, equipped with a 150 horsepower engine, have an NEDC fuel consumption of 7.1L per 100 kilometers. The Haval M6-2021 PLUS-1.5T-DCT Elite Smart Connect, DCT Luxury Smart Connect, DCT Comfort, DCT Liu Yan co-branded edition, and DCT Premium Smart Connect models, also equipped with a 150 horsepower engine, have an NEDC fuel consumption of 6.9L per 100 kilometers. The fuel tank capacity of the Haval M6 models is the same. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 150 horsepower engine, the fuel tank capacity is 55L, and the distance that can be covered with a full tank is 55/7.1*100=775KM. For models equipped with a 107 horsepower engine, the fuel tank capacity is 55L, and the distance that can be covered with a full tank is 55/6.9*100=797KM. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
11
0
Share
LeBethany
08/11/25 5:03am
I've been driving a Haval M6 manual transmission for almost two years now, and it averages around 9.5L/100km in city driving, which works out to just over 7 cents per kilometer. This car is particularly fuel-efficient on highways—last time I reset the data and drove 300 kilometers on the highway, the display showed only 7.2L. But honestly, fuel consumption really depends on road conditions. During rush hour traffic, it can spike to 11L, but on weekends when driving in suburban areas, it can drop to 8.5L. I recommend using 92-octane fuel; there's no need for higher grades. Regularly checking tire pressure can also save some fuel costs. If you want to save even more, try anticipating traffic lights and avoid sudden braking.
Was this review help?
8
3
Share
Expand All
More Forum Discussions

What is the situation when the rear charging port of Jetour X90 has no power?

There are two situations when the rear charging port of Jetour X90 has no power: connecting the phone through the USB port, but the phone shows no charging display; connecting the phone through the USB port, the phone shows a charging display, but it just doesn't charge. No charging display on the phone: The vehicle USB port fuse is blown (find the corresponding fuse through the vehicle manual, and replace the spare fuse in time if there is a blown phenomenon). The phone charging port spring is loose, causing poor contact. The phone shows a charging display, but it doesn't charge: If this happens, it means that the USB port is only for reading U disk data, not for charging the phone. You can check the application range of the USB port through the vehicle manual.
8
2
Share

Does the Chery 484 engine VVT pulley need timing alignment?

Chery 484 engine VVT pulley requires timing alignment. Issues with the VVT timing pulley may cause timing belt skipping, leading to symptoms such as unstable idle speed and poor acceleration in the engine. Nature of VVT: The technology employed in VVT engines, namely Continuous Variable Valve Timing technology, can continuously adjust the engine's valve opening/closing timing and air intake volume, thereby improving engine power, optimizing torque curves, and reducing fuel consumption. Working principle of VVT: The working principle of VVT is that the crankshaft drives the camshaft through timing belts, gears, or chains. The profile and position of camshaft lobes are typically optimized for specific engine speeds, which usually reduces torque at low RPM and power at high RPM. VVT technology enables adjustments based on engine operating conditions, enhancing engine efficiency and power output.
18
4
Share

Where is the OK button on the Besturn B70?

The OK button on the Besturn B70 is located on the control panel. This button is used to operate the trip computer. Press lightly to confirm (OK), press and hold to reset (RESET). Function of the trip computer: The trip computer is a high-tech electronic product that uses advanced technology. It is used to read vehicle data. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If the vehicle's emissions exceed standards, it will immediately issue a warning. Function of OK/RESET: OK/RESET is a multifunctional button. It serves as a confirmation button when adjusting the clock; when in the short-distance mileage/total mileage function, it is used to toggle display/reset.
17
2
Share

What are the functions of the central control DISP button?

The function of the central control DISP button in a car is: it can adjust vehicle information such as mileage, fuel consumption records, remaining fuel quantity, remaining range, etc. It can display information like fuel consumption and mileage, and a long press can reset these values. More details about the central control DISP are as follows: 1. DISP refers to screen display: The disp button in a car is usually located on the steering wheel and stands for screen display. It is used to change the content displayed by the trip computer, such as fuel consumption, remaining range, etc. 2. Specific functions: It can display instantaneous fuel consumption, average fuel consumption, etc. The lever above is the steering gear indicator light, which will illuminate when the key is turned on without starting the engine. If it remains lit after starting the engine, it indicates a problem with the steering gear system, such as difficulty in turning the steering wheel.
11
2
Share

What does the SRS display on the Mercedes R350 dashboard mean?

The SRS on the Mercedes dashboard is an abbreviation for the vehicle's service reminder light in English. Since 'service' is too long to display on the dashboard, it is replaced with SRS, which serves as a warning light to remind the driver of regular maintenance. If the maintenance has already been performed, this reminder can be reset directly. Mercedes maintenance intervals: The maintenance cycle for Mercedes is one year or 10,000 kilometers for an oil change. For new cars, the first oil change is recommended at six months or 8,000 kilometers, and the brake fluid should be replaced every two years. How to reset the Mercedes maintenance light: First, start the vehicle, then press the button on the left side of the dashboard twice and turn off the engine. Keep holding the button, then start the vehicle again. Wait a few seconds until you hear a beep, then release the button.
14
4
Share

What's the reason for BMW X4's non-responsive reverse radar and central control?

It is highly likely due to poor line contact. It is necessary to promptly check the wiring and the connection points of the entire vehicle's installation to see if there are any loose connections. The following are other possible causes: Aging of the video power cable: You can try replacing it with a new power cable. If the issue is resolved, it indeed indicates a problem with the video power cable. Prolonged use of the car camera: Extended use of the car camera can lead to poor chip photosensitivity, resulting not only in a snowy screen but also potential black screen issues. Such chip abnormalities and design defects are beyond the owner's ability to resolve and require inspection, repair, or direct replacement at a repair shop.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.