What is the actual fuel consumption of the Xingrui?

How to Turn Off the Ambient Light?

The method to turn off the car's ambient light is as follows: the first button on the left side of the steering wheel, when pushed downward, can adjust the light to its dimmest setting. Ambient lighting in cars has now become a key selling point for many vehicle models and is favored by numerous consumers. Relevant information about car ambient lighting is as follows: 1. Definition of Ambient Light: Car ambient lighting is essentially an interior light used to enhance the atmosphere inside the vehicle. It allows users to set the color, brightness, temperature, and direction of the light as needed, making the interior more vibrant at night, enhancing the mood, and creating a specific ambiance. 2. Function: Typically, car ambient lights are mainly red, blue, green, etc., similar to common decorative lights, and the colors can be freely chosen. However, it is important to note that the color of the ambient light should not interfere with normal safe driving. After all, its primary purpose is to enhance the atmosphere, soothe the driver's mood, and alleviate fatigue.

18

4

Share

What does the dAppen car sticker mean?

Dappen is a car sticker for modified cars without any special meaning. It is merely a label and symbol for modified vehicles, serving as a trendy and personalized decoration for the car body. Below is some related information about car modifications: 1. Modification Projects: Car modifications include engine modifications, chassis modifications, electrical equipment modifications, body modifications, interior modifications, and entertainment and information system modifications. 2. Engine Modifications: For engine modifications, such as intake system, exhaust system, fuel supply system, crankshaft and connecting rod mechanism, valve train, compression ratio, and turbocharging system. In the intake system modification, try to avoid large bends in the intake pipe, use heat insulation materials to separate the engine compartment and the air filter (commonly referred to as the 'mushroom head'). It is important to note that cars with more thorough modifications may require a larger throttle body.

17

0

Share

How many liters of transmission oil does an Aisin 6AT require?

The amount of oil used varies depending on the oil change method. During maintenance, there are two modes to choose from: 1. Approximately 10 liters can be replaced with a flushing machine oil change. The effect of flushing oil change is better, as it can remove impurities at the bottom and make the machine interior cleaner. 2. Gravity oil change requires about 4-6 liters. This method is similar to changing the vehicle's engine oil. Below are some additional tips: 1. It is recommended to change the transmission oil once every 60,000 kilometers. 2. If the vehicle is used frequently, the transmission oil should be changed at around 40,000 kilometers. 3. When changing the transmission oil, it is important to use the specific oil designed for the vehicle to ensure normal operation and extend the transmission's lifespan.

10

3

Share

What are the disadvantages of using a circulation machine to change transmission fluid?

The drawback of using a circulation machine to change transmission fluid lies in the increased usage of transmission fluid, leading to higher costs. Below is a related introduction: 1. Traditional manual transmission fluid change method: The traditional manual method only replaces the fluid in the transmission oil pan, leaving some ATF inside the transmission that cannot be removed. After the change, new and old fluids are mixed, resulting in an incomplete replacement that doesn't fully serve the purpose of changing the fluid. 2. Circulation machine transmission fluid change method: Using a circulation machine to replace ATF involves simultaneously extracting old fluid and injecting new fluid, using pressure to push out the old fluid with the new one. This ensures that the transmission is filled with new ATF, which can be visually confirmed on the equipment, achieving a complete replacement effect. Generally, using a circulation machine requires more than double the amount of new fluid compared to the traditional manual method. Although the cost increases, the effect is significantly better. A circulation machine generates pressure to dynamically replace automatic transmission fluid, achieving a replacement rate of over 90%. The operation process is simple but requires equipment support.

19

3

Share

Why Does the Engine Belt Make Abnormal Noises?

Abnormal noises from the engine belt may be due to a reduced friction coefficient on the belt surface or excessive belt wear, requiring immediate inspection and replacement by the owner. Below is relevant information about engine belts: 1. Replacement Interval: The replacement cycle for engine belts varies by vehicle model. Typically, the timing belt should be replaced every 60,000 to 80,000 kilometers. Some higher-quality belts may last up to 100,000 kilometers. 2. Precautions: During routine maintenance, it is advisable to regularly inspect the timing belt. If cracks are found, do not continue using it; replace it immediately to avoid potentially severe consequences.

9

5

Share

Is fingerprint recording required for the Theory Test?

Fingerprint recording is required for the Theory Test. Below is relevant information about the Theory Test: 1. Definition of the Theory Test: The Theory Test refers to the driver's theoretical examination conducted at the Vehicle Management Office, which is a mandatory licensing test for all driver's license applicants. The test content includes the most fundamental knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the Theory Test is arranged independently by local Vehicle Management Offices. 2. Purpose of the Theory Test: The Theory Test is part of the teaching and examination outline for motor vehicle driver training. This outline divides the examination into three subjects, organized by the traffic management department of the public security authority. The examination sequence proceeds in the order of Theory Test (Subject 1), Practical Driving Test (Subject 2), and Road Test (Subject 3). Candidates can proceed to the next subject only after passing the previous one; if a candidate fails a subject, they must retake that subject's examination.

1

5

Share

What is the actual fuel consumption of the Xingrui?

How to Turn Off the Ambient Light?

What does the dAppen car sticker mean?

How many liters of transmission oil does an Aisin 6AT require?

What are the disadvantages of using a circulation machine to change transmission fluid?

Why Does the Engine Belt Make Abnormal Noises?

Is fingerprint recording required for the Theory Test?

Why is the brake disc always making noise?

What is the fuel consumption of the Mustang 2.3t?

What kind of engine oil is best for Ford Mustang?

What Causes the Parking Brake Warning Light to Illuminate?