What is the actual fuel consumption of the Wuling Xingchen?

1 Answers
HadleyMarie
07/29/25 10:09pm
Wuling Xingchen's actual measured average fuel consumption is around 8.5L per 100 kilometers. Methods to determine fuel consumption: You can determine fuel consumption through the car's dashboard, where F=full (represents full); E=empty (represents empty). When the fuel tank's red light comes on, record the mileage, then note how much fuel is added. When the fuel is next exhausted, record the mileage again. Subtract the initial recorded mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In relative terms, the size of a car's engine displacement does not directly correlate with fuel consumption. Besides engine displacement, factors such as the car's shape, weight, and engine technology also significantly affect fuel consumption. Among vehicles with the same displacement, those with more advanced engine technology tend to be more fuel-efficient.
Was this review help?
6
3
Share
More Forum Discussions

How to Check the Engine Oil Level of Lynk & Co 02?

Here is the method to check the engine oil level of Lynk & Co 02: 1. The engine oil level of Lynk & Co 02 is displayed on the dashboard. Press and hold the start button for ten seconds without stepping on the brake, and the oil condition will be shown on the dashboard. 2. When checking, make sure the car's four wheels are parked on the same level surface without any tilt. If the car body is tilted, the oil level in the oil pan will change, resulting in inaccurate measurements. Additional Information: Here is an introduction to the Lynk & Co 02: 1. Exterior Design. The urban skyline front grille, with integrated headlights and grille design, makes the front end appear wider. The split-type headlights are the most distinctive feature of Lynk & Co models, integrating the turn signal function. 2. Body Dimensions. The Lynk & Co 02 measures 4448mm in length, 1890mm in width, and 1528mm in height, with a wheelbase of 2702mm. It has a ground clearance of 201mm, ensuring SUV-level passability.
3
4
Share

Can You Take Subject Four After Passing Subject Two?

You cannot take Subject Four after passing Subject Two. Below is an introduction to Subject Two: Introduction: Subject Two, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test. Small vehicle C1/C2 Subject Two test items: Include five mandatory tests—reverse parking, parallel parking, hill start, right-angle turn, and curve driving (some regions have a sixth item—highway toll card collection). Large vehicle A1/A2/A3/B1/B2 Subject Two test items: Include pole test, hill start, parallel parking, single-plank bridge crossing, curve driving, right-angle turn, passing through a narrow gate, passing continuous obstacles, bumpy road driving, narrow road driving, and emergency handling.
13
4
Share

How to reset the tire pressure light on the 2020 Geely Vision X6?

Method to reset the tire pressure light on the 2020 Geely Vision X6: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "ding" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid overinflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and valve core are not properly aligned, have protrusions, depressions, or other defects, it may be difficult to inflate or measure the pressure. Ensure cleanliness when inflating. The air being pumped in should not contain moisture or oil to prevent deterioration and damage to the inner tube rubber. Do not exceed the standard pressure too much when inflating and then release air, nor inflate excessively due to prolonged inability to inflate while traveling. Overinflation beyond the standard can cause excessive stretching of the cords, reducing their strength and affecting the tire's lifespan.
16
1
Share

Why can't I check my score after passing Subject 4?

After passing the Subject 4 exam, the test concludes and the driver's license issuance process begins. All examination records are archived, making it impossible to check individual test scores. Below is relevant information about the driver's license examination: 1. Test content: The examination consists of three subjects - traffic regulations and related knowledge, field driving, and road driving. 2. Sequence: The examination subjects proceed in the order of traffic regulations and related knowledge, field driving, and road driving. During the examination process, if a candidate fails any subject, subsequent subjects will not be administered. Each subject has two attempts, and if both attempts fail, the entire examination process will be terminated.
17
5
Share

How many kilometers can a 60V 50Ah lithium battery run?

60V 50Ah lithium battery can run about 60 kilometers. The following is the relevant introduction about automobile battery: Function: The battery plays an important role in the use of the car. If it cannot supply power normally, the engine will have problems or stop. Factors affecting battery life: vehicle condition, road condition, driver's habit. Generally, the newer the car, the more battery saving, because the motor is easy to use and saves battery, the generator is easy to use, and the battery can be fully charged. After the car is old, especially when the original engine parts are replaced and cannot reach the original level, the probability of battery problems will greatly increase.
16
4
Share

Can the maintenance light of Zotye z300 be reset?

The method to reset the maintenance light of Zotye z300: Turn off the ignition switch and long press the two long buttons on the instrument panel; Turn on the ignition switch to make all the indicator lights on the instrument panel light up; Press the two long rod buttons on the instrument panel until the maintenance light goes out; After the maintenance light goes out, release the two long rod buttons; Restart the car, and the maintenance light reset is completed. The following is the relevant content: Benefits of daily maintenance: Timely replacement of excessively dirty engine oil can effectively protect the engine or transmission, etc. Sometimes problems that cannot be found during driving can be detected in time through maintenance inspections, eliminating potential hazards. Make the vehicle run more smoothly, reduce engine wear, and extend the vehicle's lifespan. Daily vehicle maintenance: In addition to the specified mileage that requires maintenance at the 4S store, the car also needs maintenance during daily use. Daily maintenance mainly includes the following five items: Clean the car body, windows, lamp glass, etc., remove dust and sand spots to prevent paint corrosion; Check whether the tire tread is deep enough, whether the tire pressure is normal, and whether the screws are tightened; Check the sealing condition of the engine intake pipe and whether the filter has problems; Check whether the battery electrolyte is sufficient, whether the terminal connections are tight, and whether the ventilation holes are blocked; Check whether the dashboard, wipers, and lighting system have faults.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.