What is the actual fuel consumption of the Wrangler?

1 Answers
VonViolet
07/30/25 6:09am
The comprehensive fuel consumption of the Wrangler is 8.9-9.9L/100km. There are currently 7 models of the Wrangler on sale: the High Altitude four-door version, High Altitude Alaska Aurora Green Special Edition, Sahara four-door version, and 80th Anniversary Edition, all with a comprehensive fuel consumption of 9L/100km. The Sahara two-door version has a comprehensive fuel consumption of 8.9L/100km. The Rubicon two-door version has a comprehensive fuel consumption of 9.6L/100km. The Rubicon four-door version has a comprehensive fuel consumption of 9.9L/100km. The above figures are NEDC comprehensive fuel consumption, which are the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than these values, ranging from 10.0-12.6L/100km. The fuel consumption of a vehicle is directly related to five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a vehicle's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The vehicle itself: Vehicles with larger displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier vehicles also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the vehicle's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
10
5
Share
More Forum Discussions

Where is the fuel tank button on the Mercedes-Benz C260?

The Mercedes-Benz C260 does not have a fuel tank button switch; pressing the fuel tank cover will open it. Here is a brief introduction about Mercedes-Benz: 1. Basic Information: Mercedes-Benz is a world-class luxury car brand, considered one of the most premium automobile brands globally. It is renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe styles. Internationally, the brand is commonly referred to as Mercedes, while in mainland China, it is called "Benz" (hence the term Mercedes-Benz). In Taiwan, it is translated as "Benz," and in Hong Kong, it is called "Ping Zhi." 2. Brand History: Mercedes-Benz is a world-famous luxury car brand. In January 1886, Karl Benz invented the world's first three-wheeled car and obtained a patent (Patent No.: DRP-37435-[1]), earning him the title "Inventor of the Automobile." At the same time, Gottlieb Daimler, another founder of Mercedes-Benz, invented the world's first four-wheeled car.
12
5
Share

Why does the idle speed fluctuate after cleaning the throttle valve?

After cleaning the throttle valve, it needs to be reset. If not reset, the idle speed may fluctuate. It is recommended to have it reset at a 4S shop. More information about the throttle valve is as follows: 1. The throttle valve is a controllable valve that regulates the air entering the engine. The air mixes with gasoline in the intake pipe to form a combustible mixture, which then burns to perform work. 2. The throttle valve is connected to the air filter at the top and the engine block at the bottom, and is known as the throat of the car engine. 3. The throttle valve needs to be replaced regularly, with the interval depending on factors such as the quality of the air filter, the quality of the engine oil, and the driving conditions of the vehicle. 4. There are four types of electronic throttle valves: electro-hydraulic, linear solenoid, stepper motor, and DC servo motor.
13
1
Share

What Causes Abnormal Noise in the Mercedes-Benz 276 Engine?

Possible causes of abnormal noise in the Mercedes-Benz 276 engine are as follows: 1. Engine idle speed is too high. 2. Improper adjustment of the throttle cable or throttle position sensor, resulting in excessively high main oil circuit pressure. 3. Delayed upshifting. 4. Cracked or loose vacuum hose of the vacuum-type throttle valve. 5. Faulty main oil circuit pressure regulator, causing excessively high main oil circuit pressure. 6. Damper piston stuck, unable to function as a damper. 7. Missing one-way valve steel ball, causing shift actuators (clutch or brake) to engage too quickly. 8. Slipping shift actuators. 9. Oil pressure solenoid valve not functioning. 10. Faulty computer.
10
4
Share

Foggy Windows on Rainy Days: Should You Use Hot or Cold Air Conditioning?

When dealing with foggy windows on rainy days, whether to use hot or cold air conditioning depends on the season, with two scenarios: 1. In summer, the air conditioning cooling method can be employed. Utilize the air conditioning's cooling and dehumidifying function to reduce air humidity and eliminate fog. During summer, especially when multiple people enter the car without promptly turning on the air conditioning, the exhaled air has high humidity, quickly causing the windshield to fog up. At this point, you can turn on the air conditioning to blow cold air toward the windshield, using its dehumidifying function to remove the fog. 2. In winter, the air conditioning heating method is suitable. This involves reducing the temperature difference to eliminate fog. In winter, directing warm air onto the glass quickly raises the temperature of the front glass, reducing the temperature difference between the inner and outer surfaces of the window. This can promptly prevent excessive fogging on the windshield. However, the rear and side windows warm up more slowly, so it takes longer to completely remove all the fog.
1
4
Share

What is the service life of platinum spark plugs?

The service life of platinum spark plugs is 20,000-30,000 kilometers. Below is detailed information about automotive spark plugs: 1. Overview: Automotive spark plugs, commonly known as sparking plugs, function by discharging the pulsed high-voltage electricity sent from the high-tension leads (spark plug wires), breaking down the air between the two electrodes of the spark plug to generate an electric spark, thereby igniting the air-fuel mixture in the cylinder. They can be broadly categorized into standard spark plugs and insulator-protruding spark plugs. 2. Additional Information: The fundamental requirements for a high-performance engine include a stable high-energy spark, a uniformly mixed air-fuel mixture, and a high compression ratio. The key component of a spark plug is the insulator. The insulator of a spark plug must possess excellent mechanical properties, high voltage resistance, high-temperature impact resistance, and chemical corrosion resistance. Ordinary spark plugs are typically made of alumina-based ceramics.
9
3
Share

What items need to be replaced during a major 60,000-kilometer car maintenance?

Major 60,000-kilometer car maintenance includes replacing engine oil, oil filter, air filter, built-in cabin air filter, external cabin air filter, fuel filter (fuel pump-filter assembly), brake fluid, automatic transmission fluid, spark plugs, and other items. Introduction about car maintenance: Definition of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. Scope of car maintenance: Modern car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas. Extending service life: The purpose of car maintenance is to maintain vehicle cleanliness, eliminate potential hazards to prevent failures, slow down the deterioration process, extend the service life, and keep the technical condition normal.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.