What is the actual fuel consumption of the VV5?

2 Answers
LaAshley
07/25/25 1:53pm
VV5 has a comprehensive fuel consumption of 6.7L per 100 kilometers under standard driving conditions. Here is some relevant information about fuel consumption calculation: Simple calculation method: For example, if you fill up with 200 yuan worth of 95-octane gasoline, and the current price of 95-octane gasoline is 7.15 yuan per liter, and you have driven 500 kilometers, then you can calculate the fuel consumption per 100 kilometers by dividing the refueling amount by the unit price and the driving distance, resulting in a fuel consumption of 5.5 liters per 100 kilometers. Calculation of fuel cost per kilometer: If the fuel consumption per 100 kilometers is 5.5 liters and the gasoline price is 7.15 yuan per liter, then the fuel cost per 100 kilometers is 39.325 yuan. By dividing the fuel cost per 100 kilometers by 100 kilometers, you can get the fuel cost per kilometer.
Was this review help?
7
4
Share
McSawyer
08/11/25 8:54pm
I've been driving the VV5 for almost a year now. The official fuel consumption figures are quite low, but the real-world usage doesn't match that. In city driving with frequent stop-and-go traffic, the fuel consumption is usually around 9.5 to 11 liters per 100 kilometers, and it goes even higher when using air conditioning or carrying more passengers. Last week, I took a highway trip maintaining speeds between 80-100 km/h, and the fuel consumption dropped to just over 8 liters, which is pretty good. Driving habits also play a key role - when I tried aggressive acceleration by stomping on the gas pedal, the fuel consumption noticeably spiked. It's gotten slightly better now that I've learned to drive more smoothly. Keeping tire pressure at the recommended level and regularly changing the air filter can help prevent increased fuel consumption. Overall, for an SUV, the VV5's fuel efficiency is about average - not too thirsty but not particularly fuel-efficient either. For real-world usage, you should budget for around 10 liters per 100 kilometers.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Can Pickup Trucks Enter Urban Areas?

To drive a pickup truck into urban areas, a traffic permit is required. The permit can be obtained at the municipal convenience service center. The main restriction on pickup trucks in China is that they are not allowed on urban roads, and some regions may impose limits on load capacity, in which case pickup trucks can be driven. Below are specific details: 1. Some cities, in order to protect the urban environment, improve traffic efficiency, and alleviate traffic pressure, have implemented measures to restrict truck traffic during peak hours or in certain areas, in accordance with the "Road Traffic Safety Law" and based on local road and traffic conditions. 2. The urban traffic restrictions on pickup trucks involve factors such as urban transportation and motor vehicle industry development policies. According to national technical standards, pickup trucks are classified as multi-purpose trucks, hence they are subject to corresponding restrictions in some urban areas.
9
1
Share

What should be noted when a vehicle enters a tunnel?

The precautions for vehicles entering a tunnel are: 1. Carefully observe the height and width limit signs and instructions at the entrance. Vehicles that do not meet the requirements are strictly prohibited from entering the tunnel; 2. Carefully check for oncoming traffic and sound the horn appropriately or turn on the width indicator lights when passing through; 3. When entering a two-way tunnel, drive on the right side, turn on the lights, pay attention to oncoming vehicles, and avoid honking inside the tunnel; 4. Overtaking, reversing, turning around, and parking are not allowed in the tunnel. If the vehicle breaks down, turn on the width indicator lights and taillights, and try to move the vehicle outside the tunnel. A tunnel is an engineering structure buried in the ground, utilizing underground space.
9
2
Share

What brand is the Toyota transmission?

Toyota uses transmissions from the Aisin brand. Detailed information about Aisin transmissions is as follows: 1. Aisin offers a wide range of automatic transmissions, including 4-speed, 5-speed, 6-speed, and 8-speed options. They also provide 6MT, CVT, and ECVT transmissions specifically for Toyota. 2. The 6AT comes in small-torque and medium-torque versions, while the 8AT is available in front-wheel-drive and rear-wheel-drive versions. 3. The advantages of Aisin transmissions include fast shifting, intelligent shift logic, and fuel efficiency. 4. The Aisin 8AT transmission with the model code AWF8F45 can match higher-torque engines and is designed for front-wheel-drive vehicles, offering a more compact size compared to the rear-wheel-drive 8AT version.
9
4
Share

What are the differences between Jetour X70S and X70?

Jetour X70S and X70 differ in the following aspects: 1. In terms of exterior design, the Jetour X70S features a hexagonal grille with a starry design style, which gives it a more sporty appearance compared to the horizontal grille of the X70. Additionally, the front end design of the X70S is fuller and more dynamic than that of the X70. 2. For the interior, the X70S follows contemporary trends more closely than the X70, incorporating a floating central control screen and a continuous air vent design. It also comes with multimedia control and cruise control buttons to enhance driving safety. 3. Regarding the chassis, the X70S is tuned more towards a sporty driving style.
3
3
Share

What does Audi SYNC mean?

Audi SYNC is the function button for dual-zone synchronization control. Audi vehicles adopt dual-zone control, which means the driver and front passenger can independently adjust their own air conditioning temperatures. However, when there is no passenger, pressing this button allows the driver to control both temperature zones simultaneously. The specific operation steps are as follows: 1. Depress the brake pedal of the Audi vehicle. 2. Press the one-touch start button of the Audi vehicle. 3. The instrument panel of the Audi vehicle lights up, and the vehicle starts. 4. Press the AUTO button on the air conditioning panel to activate the automatic air conditioning system. 5. Press the SYNC button on the air conditioning panel to enable the dual-zone simultaneous control mode.
20
5
Share

How to Reset the Maintenance Light on a Peugeot 308?

The method to reset the maintenance light on a Peugeot 308 is: 1. Turn off the ignition switch; 2. Press and hold the trip meter reset button; 3. Turn on the ignition switch, and release the button when the odometer displays 0000.0. The Peugeot 308 is a 4-door, 5-seater compact sedan with body dimensions of 4590mm in length, 1820mm in width, 1488mm in height, and a wheelbase of 2675mm. It is equipped with a 1.2T turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum power of 85 kW and a maximum torque of 190 Nm. The drivetrain is front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.