What is the actual fuel consumption of the Volkswagen Bora?

2 Answers
NevaehFitz
07/24/25 4:07am
The actual fuel consumption of the Volkswagen Bora ranges from 5.3 to 8.8L/100km. Its combined fuel consumption is 5.3-5.9L/100km. Currently, there are 15 models of the Volkswagen Bora available for sale. The DSG Comfort Smart Link Edition and DSG Elite Smart Link Edition have a combined fuel consumption of 5.3L/100km. The DSG Elite Smart Link Edition and DSG Luxury Smart Link Edition have a combined fuel consumption of 5.5L/100km. The Automatic 30th Anniversary Edition, Automatic Comfort Smart Link Edition, Automatic Elite Smart Link Edition, Automatic Luxury Smart Link Edition, and Automatic Fashion Smart Link Edition have a combined fuel consumption of 5.7L/100km. The Manual Fashion Smart Link Edition, Manual Comfort Smart Link Edition, Manual Fashion Type China VI, and Manual Leading Type China VI have a combined fuel consumption of 5.8L/100km. The Automatic Fashion Type China VI and Automatic Leading Type China VI have a combined fuel consumption of 5.9L/100km. The above figures are the NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 5.3 to 8.8L/100km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle in advance when encountering a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn and perform work. Cars with greater weight also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low during cold starts, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at low temperatures, the engine's computer controls the engine to run at higher RPMs to warm up, which also increases fuel consumption.
Was this review help?
14
0
Share
OLucia
08/10/25 11:43pm
I've been driving a Volkswagen Bora for over two years now. In city traffic jams, the fuel consumption can soar to around 10 liters per 100 kilometers, which is quite fuel-intensive. However, on highways, it easily drops to 6-7 liters. During my daily commute of over 20 kilometers, I can clearly feel that driving smoothly and avoiding sudden acceleration can save a lot on fuel costs. In winter, turning on the air conditioning increases the fuel consumption a bit more. From my records, the average fuel consumption is between 7-8 liters, and with careful driving, a full tank can cover over 500 kilometers. Overall, the Bora handles well, but its fuel consumption is significantly affected by weather conditions. On slippery roads or during hot weather with the air conditioning on high, you'll need to budget for some extra fuel expenses.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

Can LED headlights be installed without lenses?

LEDs and lenses need to be installed together. Without a lens, the light scattering will be severe, which actually reduces the visibility of the LED. Therefore, when installing LED lights, a lens must also be installed. LED bulbs have good light concentration, and the light-shielding plate inside the lens is used to switch between high and low beams. The light pattern produced by a bi-xenon lens naturally forms a low beam with a clear cutoff line. However, without a lens, the light-shielding plate is absent, preventing the LED bulb's light concentration from being fully utilized, resulting in light scattering. Automotive lenses are divided into two types: 1. Single-beam lens: Only has a low beam, using halogen or xenon bulbs. 2. Bi-xenon lens: Achieves switching between high and low beams through an internal light-shielding plate. When the light-shielding plate is closed, it is the low beam; when opened, it is the high beam. If the bulb inside the lens remains unchanged, there will be no variation.
10
4
Share

Is installing a shark fin on a car useful?

Installing a shark fin on a car is useful, with the following main functions: 1. Aerodynamic effect: It helps overcome air resistance while driving, preventing interference with the car, thereby reducing fuel consumption. 2. The shark fin can enhance signal reception. Here are other considerations for installing a shark fin: 1. Installing a high-power shark fin is illegal, and if its appearance or other issues affect driving safety, it may result in penalties from traffic police. 2. If you wish to install a shark fin antenna legally, you can register and apply for approval at the vehicle management office. 3. Shark fins that come pre-installed on cars from the factory are legal, as products manufactured through legitimate and formal channels can be traced back to their source.
6
5
Share

How to Use the Foot Brake in an Automatic Car?

The foot-operated parking brake functions similarly to the hand-operated parking brake, both achieving parking brake functionality by tightening the brake shoes via steel cables. The foot brake simply replaces the hand lever with a pedal. The usage method for the foot brake in automatic cars is as follows: 1. Foot-operated parking brake: Operated by foot, commonly found in automatic transmission models. 2. Method to control the foot-operated parking brake: Press the left pedal all the way down to engage; then press it again firmly and release to disengage the parking brake. 3. For Mercedes-Benz vehicles with foot-operated parking brakes, manual assistance is required to release it. There is a handle on the left side of the steering wheel; pulling it will release the foot-operated parking brake.
20
3
Share

What is the actual fuel consumption test result for the fourth-generation Santa Fe?

The average actual fuel consumption of the fourth-generation Santa Fe is 8.9L/100km. The following is an introduction about Beijing Hyundai: 1. Introduction: Beijing Hyundai Motor Co., Ltd. (BEIJING-HYUNDAI AUTO, referred to as "Beijing Hyundai"). 2. Content: It is a Sino-foreign joint venture company engaged in the production and sales of automobiles, established on October 18, 2002, with its headquarters located in Beijing. Beijing Hyundai's product line covers sub-markets such as A0-class, A-class, B-class, and SUVs. 3. Development: In September 2018, the Passenger Car Association released the wholesale sales ranking of China's narrow passenger cars in August 2018, with Beijing Hyundai ranking 7th with sales of 71,006 units.
11
5
Share

What to Do If You Fail the Physical Exam for Driver's License Renewal?

Here are the solutions if you fail the physical exam for driver's license renewal: 1. You can only apply to downgrade to a suitable vehicle class. If you do not meet the physical requirements for any vehicle class, the license must be canceled. 2. If the driver's physical condition changes and no longer meets the requirements for the current vehicle class but meets the requirements for another allowable vehicle class, the driver must apply for a downgrade at the vehicle management office where the license was issued within 30 days. 3. According to regulations, drivers must apply for renewal at the vehicle management office where the license was issued within 90 days before the license expires. When applying, they must fill out an application form and submit their ID and driver's license.
13
2
Share

Which country is IPE exhaust from?

Ipe exhaust, with its full name being Innotech-Performance-Exhaust, was established in Taiwan, China. It is a brand manufacturer specializing in high-performance sports car exhaust systems. In its early development stage, it mainly focused on OEM production, manufacturing for many internationally renowned brands. After years of continuous development, it officially launched the IPE brand and independently developed variable-sound exhaust systems. Additional information: 1. Content one: IPE exhaust technology independently developed the JIM variable exhaust valve control system. At low RPM, the valve closes, and exhaust gases are discharged through a smaller pipe, enhancing backpressure. At high RPM, the valve opens, allowing smoother exhaust flow, thereby increasing horsepower. 2. Content two: Regarding the control system of the JIM system, the computer controlling its operation needs to be connected to the factory throttle position sensor, controlling the opening and closing based on the throttle depth parameter.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.