What is the actual fuel consumption of the URV 2.0T?

2 Answers
Cupid
07/24/25 8:53am
The fuel consumption of the URV 2.0T is 9.8 liters per 100 kilometers. The fuel consumption of a car varies slightly depending on each person's driving habits and skills. If driving habits are smoother, fuel consumption will be lower. If you usually prefer aggressive driving, overtaking, and other high-RPM operations, fuel consumption will increase appropriately. Here are some methods to reduce fuel consumption: 1. Check the air conditioning system in summer: Air conditioning malfunctions are a significant cause of high fuel consumption. If the cooling effect is poor, it will increase fan speed and lower the temperature to achieve a cooler effect. 2. Frequent sudden braking: Frequent sudden braking is the main reason for persistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. 3. Avoid excessive air conditioning in small-displacement cars: For vehicles exposed to the sun, do not turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait for the vehicle to cool down moderately before turning on the air conditioning.
Was this review help?
18
4
Share
StephenLynn
08/11/25 4:24am
I've been driving a Honda UR-V 2.0T for two years, mainly for city commuting and weekend trips. The official claimed combined fuel consumption is about 9.5L/100km, but in my actual driving, the combined value fluctuates significantly between 11 to 13L. In city traffic jams, it can soar to 15L, while highway cruising can drop it to around 7.5L. It largely depends on how aggressively I drive; by trying to start and decelerate smoothly, I can control the fuel consumption to around 10L. Factors affecting consumption include air conditioning use—using it more in summer adds about 1L—and tire pressure maintenance; underinflation increases rolling resistance. Maintenance is also crucial, as changing the air filter and engine oil improves efficiency. I recommend paying attention to daily driving habits and trying to avoid peak hours. This car has strong power but relatively high fuel consumption, making it suitable for family use but don't expect it to save money.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What does it mean when the engine automatically shuts off after stepping on the brake at a red light?

When the engine automatically shuts off after stepping on the brake at a red light, it is the engine auto start-stop function, not a malfunction. The engine auto start-stop function automatically shuts off the engine when the vehicle comes to a temporary stop (such as at a red light) during driving and automatically restarts the engine when it's time to move forward again. This system is suitable for stop-and-go urban driving conditions and can achieve up to 15% fuel savings in city driving. Precautions for the engine auto start-stop function include: 1. It will not activate when the engine temperature is insufficient, avoiding frequent engine starts when the engine is cold to prevent damage; 2. It will not activate when the battery voltage is not fully sufficient, ensuring a smooth restart without affecting the engine due to insufficient voltage.
8
1
Share

What Causes the Brake System Warning Light to Illuminate?

Reasons for the brake system warning light to illuminate: 1. ABS function failure; 2. Severe wear or complete failure of brake pads; 3. Non-compliant brake fluid. Abnormalities in the brake system manifest as poor or ineffective braking, unilateral braking deviation, braking noise, brake drum overheating due to brake drag, or parking brake failure. The automotive brake system refers to a series of specialized devices that apply a certain force to specific parts of the vehicle (primarily the wheels) to enforce a certain degree of braking. The functions of the brake system are: to forcibly decelerate or even stop a moving vehicle as required by the driver; to ensure a stationary vehicle remains stable under various road conditions (including on slopes); and to maintain a stable speed for a vehicle moving downhill.
8
4
Share

How to Apply for a Temporary License Plate for a New Car?

New car temporary license plate application procedures: The applicant needs to present a company introduction letter, vehicle origin certificate, compliance certificate, and other relevant documents to the vehicle management office for processing. During the application, the applicant must specify the start and end locations of the vehicle's travel and the duration of temporary plate usage. After review by the management staff and a successful vehicle inspection, a temporary license plate will be issued, with the validity period and travel locations specified. The temporary license plate is a paper license plate that allows the vehicle to be driven temporarily on public roads. It serves as a temporary driving permit issued by the vehicle management department before the new car is officially registered. The temporary license plate must not be used for more than 15 days, and the owner should promptly apply for a permanent license plate from the vehicle management authority.
14
5
Share

Can You Still Drive with a Broken Car Clutch Plate?

You cannot drive with a broken car clutch plate. In most cases, the clutch plate is either worn thin or burnt out. Symptoms include the engine revving up when you accelerate sharply but the car not responding, or in severe cases, the car failing to move after engaging a gear and releasing the clutch. Continuing to drive with a damaged clutch plate is highly dangerous, so it is recommended to have it inspected at a nearby repair shop. The clutch plate is a wear-prone component in a vehicle's drivetrain. Special attention should be paid to avoid keeping your foot on the clutch pedal while the engine is running. Develop good driving habits from the start—only press the clutch when starting, shifting gears, or braking at low speeds. Avoid unnecessary clutch usage and keeping your foot on the pedal at other times.
2
5
Share

Which company manufactures the transmission for the Audi S4?

Audi S4's transmission is produced by ZF Friedrichshafen AG. Below are the relevant details: Audi S4 Transmission: The Audi S4's transmission is manufactured by ZF Friedrichshafen AG and utilizes an 8-speed automatic manual transmission. Audi S4 Overview: The Audi S4 is equipped with a 3.0-liter V6 turbocharged engine, delivering a maximum power of 260 kW, 354 horsepower, and a peak torque of 500 Nm. It features direct fuel injection, permanent all-wheel drive, and can accelerate from 0 to 100 km/h in just 4.7 seconds. In terms of suspension, the front suspension is a multi-link independent setup, and the rear suspension also employs a multi-link independent design. The Audi S4 has body dimensions of 4749mm in length, 1842mm in width, and 1400mm in height, with a wheelbase of 2831mm.
11
3
Share

How to Repair Surface Cracks on a Car's Rear Bumper?

Methods for repairing surface cracks on a car's rear bumper: 1. Remove the bumper and identify the area that needs repair; 2. Use a plastic welding gun to heat and weld the backside of the crack; 3. Move along the crack while heating the plastic welding rod; 4. Once welded, allow it to cool to complete the repair. The front and rear ends of a car are equipped with bumpers, which not only serve a decorative function but, more importantly, act as safety devices to absorb and mitigate external impacts, protecting the vehicle body and ensuring the safety of passengers. The outer panel and cushioning material of the rear bumper are made of plastic, while the crossbeam is formed by stamping cold-rolled thin steel sheets, approximately 1.5 mm thick, into a U-shaped channel. The outer panel and cushioning material are attached to the crossbeam, which is then connected to the car frame's longitudinal beams with screws, allowing for easy removal when necessary.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.