What is the actual fuel consumption of the Toyota RAV4 2.0?

1 Answers
McPiper
07/29/25 5:07pm
Toyota RAV4 fuel consumption is 8.1L/100km. Here is the relevant introduction: RAV4 Introduction: The Toyota RAV4 is the basic model in Toyota's compact multi-purpose off-road vehicle family. Its name comes from the abbreviation of Recreational Active Vehicle with 4-wheel drive, meaning a four-wheel-drive recreational sports vehicle. The RAV4 was introduced in Japan in 1994, with sales twice Toyota's expectations. It was exported to the United States in January 1996. The RAV4's unitized body structure is unique among multi-purpose off-road vehicles. On August 26, 2013, the new Toyota RAV4 was launched in China. Vehicle Positioning: The RAV4 is positioned as a city SUV. As a leader in city SUVs, the RAV4 combines high quality and performance with driving comfort and excellent off-road capability, meeting the needs of diverse lifestyles, making it a high-performance city SUV that adapts flexibly.
Was this review help?
10
4
Share
More Forum Discussions

What is the difference between the front and rear wiper symbols?

Car front wiper symbol is a fan-shaped icon with a diagonal line on the left and a water spray line in the middle, while the rear wiper symbol is a rectangular icon with a diagonal line on the left and a water spray line in the middle. More details are as follows: 1. The wiper, also known as the windshield wiper, is a device used to remove raindrops and dust attached to the vehicle's windshield to improve the driver's visibility. 2. The worm gear mechanism serves to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into a left-right oscillating motion. The wiper motor adopts a 3-brush structure for easy speed change. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a certain cycle. 3. The wiper blade rubber is the tool that directly removes rainwater and dirt from the glass. The blade rubber is pressed against the glass surface by a spring strip, and its lip must match the angle of the glass to achieve the required performance.
14
2
Share

What is the difference between LT and C on tires?

The difference between LT and C on tires lies in their meanings. LT refers to the tire type, indicating Light Truck tires, while C is a speed symbol, representing a maximum speed of 60 km/h. Below is more information about tires: 1. Tires are one of the most important components of a vehicle, serving several key functions: supporting the entire weight of the vehicle and bearing its load; transmitting traction and braking torque to ensure adhesion between the wheels and the road; absorbing shocks and vibrations during driving to prevent excessive wear and early damage to vehicle components; adapting to high-speed performance while reducing driving noise; and ensuring safety, handling stability, comfort, and fuel efficiency. 2. Tires can be classified into approximately 7 types based on vehicle application: PC - Passenger Car tires; LT - Light Truck tires; TB - Truck and Bus tires; AG - Agricultural Vehicle tires; OTR - Off-The-Road (Engineering Vehicle) tires; ID - Industrial Vehicle tires; MC - Motorcycle tires.
10
5
Share

What are the penalty points for Subject 2 of the driving test?

The penalty points for Subject 2 of the driving test include: not wearing a seatbelt deducts 100 points, failing to use the turn signal during parallel parking or uphill parking deducts 10 points, stalling the engine once deducts 10 points, exceeding 210 seconds for reversing into the garage deducts 100 points, failing to fully reverse into the garage deducts 100 points, and the vehicle body crossing the line deducts 100 points. More information about Subject 2 is as follows: 1. Subject 2, also known as the small road test, is the first practical driving test among the four exams for students. The specific test items for Subject 2 include: right-angle turns, curve driving, hill-start parking, parallel parking, and reversing into the garage (some regions may have additional items). The total score is 100 points. For large buses, tractors, city buses, medium-sized buses, and large trucks, a passing score is 90 points, while other vehicle types require a score of 80 points to pass. 2. According to Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" (Ministry of Public Security Order No. 123), the content of the Subject 2 test includes: 1) For large buses, tractors, city buses, medium-sized buses, and large trucks: pile test, hill-start parking, parallel parking, single-plank bridge, curve driving, right-angle turns, limited-width gate, continuous obstacles, bumpy road driving, narrow road U-turns, and simulated highway, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling; 2) For small cars, small automatic transmission cars, small automatic transmission cars for disabled people, and low-speed trucks: reversing into the garage, hill-start parking, parallel parking, curve driving, and right-angle turns; 3) For three-wheeled cars, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and light motorcycles: pile test, hill-start parking, and single-plank bridge; 4) The test content for wheeled self-propelled machinery, trolleybuses, and trams is determined by the provincial traffic management department of the public security authority.
3
1
Share

What Causes a Sudden Change in Car Horn Sound?

Car horn sound suddenly becoming muffled is usually caused by poor contact of the horn plug, especially the contacts around the steering wheel, which are prone to wear due to frequent use. The car horn is an audio signal device during driving, ensuring traffic safety. Here are the details: 1. When the driver presses the horn switch, current passes through the contacts, generating magnetic force through the coil, causing the diaphragm to move and the soundboard connected to the diaphragm to produce sound. 2. Car horns are divided into air horns and electric horns based on sound power, and into high-pitch and low-pitch horns based on frequency. Air horns produce sound by vibrating diaphragms through compressed air, while electric horns generate sound through electromagnetic attraction vibrating the diaphragms. Electric horns are widely used in cars, while air horns are commonly found in buses and heavy trucks.
15
2
Share

What does a circle with an exclamation mark mean on the car?

The "circle with an exclamation mark" indicator on the car dashboard is the brake warning light, also known as the handbrake warning light. This light may illuminate if the handbrake is not fully released or if it is partially engaged. Even if the handbrake is lowered, it may not be completely disengaged, causing the light to remain on. More details are as follows: 1. If the handbrake is fully released but the issue persists, it could indicate severely worn brake pads or low brake fluid levels, which require immediate inspection. Dashboard warning lights are crucial signals reflecting the working conditions of various car systems and should not be ignored. Common indicators include the fuel warning light, brake fluid warning light, engine oil warning light, washer fluid warning light, seatbelt warning light, etc. 2. Take the engine warning light as an example: when it lights up yellow, it indicates an engine fault that does not affect normal operation but still requires prompt inspection. If the engine warning light turns red, it signifies a severe engine malfunction, and the vehicle should be stopped and turned off immediately for repairs. If stopping is not possible due to special road conditions, the engine's working condition should be closely monitored.
1
4
Share

What are the reasons for no response and no power when pressing the one-button start?

The following are the reasons why the one-button start does not respond or power on: 1. The steering wheel was not straightened when parking, and when the angle exceeds 30°, the steering wheel will automatically lock, preventing ignition; 2. The vehicle is not in P gear. For automatic transmission vehicles (AT, CVT, AMT), manufacturers preset the ignition to ensure the gear is in the P position; 3. Malfunctions in components such as the fuel pump, starter, and crankshaft position sensor can all cause failure to start; 4. Excessive carbon buildup in the throttle body. When the accelerator is not pressed, the throttle body leaves only a small gap for air to pass through. If carbon buildup blocks this gap, air cannot pass through, leading to failure to start. Alternatively, try pressing the accelerator slightly during the ignition process to see if the car starts smoothly. 5. If the dashboard also does not light up, first check if the key has power. If the key is fine, the steering column lock is likely the issue. If the steering column lock is broken and does not unlock, the dashboard will not receive power. It is recommended to seek a mechanic as soon as possible to resolve the issue to avoid other unnecessary losses.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.