What is the actual fuel consumption of the Tiguan L 330?

1 Answers
DeKinsley
07/30/25 6:33am
Around 8L. The all-new Tiguan L is equipped with Volkswagen Group's latest EA888 series 2.0T turbocharged engine, with a maximum power output of 132kW and a maximum torque of 300Nm. It is paired with a 7-speed wet dual-clutch transmission. Compared to its peers, this vehicle demonstrates excellent fuel efficiency. Below is more related information: Actual measured fuel consumption: The Volkswagen Tiguan L 380TSI 4MOTION Top Flagship version, still in its break-in period, was tested under conditions of 50% urban and 50% suburban driving with one passenger onboard. The test covered a total distance of 107 kilometers (specifically 107.6 km) at an average speed of 29km/h. The test included highway driving, urban ring roads, and congested city evening rush hours. The actual fuel consumed was 9.021L, resulting in a measured fuel consumption of 8.4L/100km, meeting expectations. During the Tiguan L test, the air conditioning was not used at all. The vehicle traveled a total of 107.6 kilometers, consuming 9.02L of fuel, with an average fuel consumption of 8.38L/100km. This result is very impressive, indicating that the powertrain system has high transmission efficiency and excellent performance in terms of fuel economy. The measured data closely aligns with the official fuel consumption figures.
Was this review help?
2
4
Share
More Forum Discussions

What is the weight of the Mercedes-Benz G-Class?

The weight of the Mercedes-Benz G-Class is 2.5 tons. General weight of cars: A small car weighs 1.5 tons, generally family cars are between 1.2 tons and 1.3 tons, mid-to-high-end cars are around 1.4 tons to 1.6 tons, and heavier ones are between 1.8 tons and 2.0 tons. Excessive body weight can lead to higher fuel consumption, poor handling, slower acceleration, and increased braking distance. Methods to reduce car weight: In terms of materials, use lighter materials such as aluminum alloy and carbon fiber; in design, optimize structural design to reduce the use of excess materials while ensuring structural rigidity, thereby reducing weight and saving costs.
3
5
Share

How to Check the Fuel Gauge on the 10th Generation Accord?

There is a square button at the lower right corner of the steering wheel in the 10th Generation Accord to check the fuel gauge. Below are the relevant instructions for checking the fuel gauge: 1. Check when the vehicle is cool: It must be done when the vehicle is cool. If you have just driven the car or the engine is running, checking at this time is useless. 2. Operation: After pulling out the dipstick for the first time, wipe it clean with a clean tissue, then reinsert it. When you pull out the dipstick for the second time, you can see the oil level on the dipstick. If the oil level is between the upper and lower limits, it means the oil level is normal. The so-called upper and lower limits are usually marked with scales, making it easy to identify.
17
4
Share

Is it okay to be one liter short of transmission fluid?

It is not okay to be one liter short of transmission fluid. If the fluid level is low, it can affect the lubrication and cooling of the transmission, and in severe cases, it may even prevent the transmission from shifting gears. The transmission is a crucial component in a car, responsible for changing speed and torque. Without a transmission, a car cannot operate properly. There are three common types of automatic transmissions in cars: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). A dual-clutch transmission essentially adds an extra set of clutches and gear-shifting control mechanisms compared to a manual transmission. One set of clutches controls the odd-numbered gears, while the other set controls the even-numbered gears. CVT transmissions offer smoother gear shifts. AT transmissions are structurally complex but represent a mature and reliable automatic transmission technology.
2
0
Share

Where is the diagnostic connector of Peugeot 2008?

The diagnostic connector of Peugeot 2008 is located under the cover below the steering wheel, which can be accessed by opening the cover. The car's diagnostic connector, also known as the OBD interface, is the vehicle's self-diagnostic system. When a fault occurs in the car, the onboard computer generates a fault code stored in the OBD. At this time, repair personnel can read it out with professional tools, facilitating the diagnosis of car faults. The Peugeot 2008 is a compact SUV produced by Dongfeng Peugeot. This car offers a choice between a 1.6L naturally aspirated engine and a 1.2L turbocharged engine, and comes with either a 5-speed manual or a 6-speed automatic transmission.
8
4
Share

Where is the diagnostic port located on the Peugeot 307?

The diagnostic port of the Peugeot 307 is located behind the panel under the left side of the driver's dashboard, and this panel is marked with 'OBD'. If you see this panel, simply pull it out to reveal the vehicle's OBD interface. Every car is equipped with an OBD interface, which can be connected to a diagnostic computer. When certain faults occur in the car, technicians can use the diagnostic computer to connect to the car's OBD interface to read fault codes. This model is equipped with a 2.0-liter naturally aspirated engine across the entire lineup, delivering 140 horsepower and a maximum torque of 200 Nm. The maximum torque is achieved at 4,000 rpm, and the maximum power is reached at 6,000 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block.
19
5
Share

Where is the reset button for the Mercedes-Benz interior temperature sensor located?

Mercedes-Benz interior temperature sensor reset button is located on the inner side of the main driver's side air duct. Principle of temperature sensor: The resistance value of a conductor changes with temperature. By measuring its resistance value, the temperature of the measured object can be calculated. Sensors constructed using this principle are called resistance temperature sensors. This type of sensor is mainly used for temperature measurement within the range of -200 to 500 degrees Celsius. The sensor usually consists of three parts: a sensitive element, a conversion element, and a measurement circuit. Function of temperature sensor: Used for automatic control of indoor ambient temperature during heating or cooling. During heating, it is used to control the operation of auxiliary electric heaters.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.