What is the actual fuel consumption of the Swift 1.3 manual?

How to Identify Car Tire Markings?

Methods for identifying car tire markings: These can be seen from the sidewall text of the tire. Currently, almost all passenger car tires are radial tires. The identification method for radial passenger car tire specifications follows the order of tire width, aspect ratio, compatible rim diameter, load index, and speed rating. Car tire markings refer to the meanings of various symbols on the tire, including the tire's specifications, ply rating, rim size, speed rating, etc. For example, 195/65R15 indicates a tread width of 195 millimeters, an aspect ratio of 65, R stands for radial tire, and 15 refers to the tire's inner diameter of 15 inches. Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling on the ground.

15

1

Share

How to One-Touch Power Window Control?

Method for one-touch power window operation: The window control switch equipped with one-touch function has two positions. The first position works like a regular power window - you need to hold the switch until the window reaches the desired position, then release to stop movement. The second position allows fully automatic operation - just press and release the button once, and the window will automatically open or close completely. One-touch power windows refer to a system where window glass can be fully opened or closed with a single button press. This feature is typically available in mid-to-high-end vehicles, designed mainly for convenience and to prevent drivers from being distracted while operating windows, thereby improving safety. One-touch windows usually come with anti-pinch protection - if any obstruction is detected between the glass and window frame during automatic closing, the window will automatically stop and reverse to its initial position to prevent potential pinching hazards.

11

4

Share

How to remove stickers on the car body?

The methods to remove stickers on the car body are: 1. Use a hair dryer to heat the sticker, wait until the adhesive on the sticker softens, and then peel it off; 2. After removing the sticker, residual adhesive may remain, which can be cleaned with an eraser; 3. Special tar remover or alcohol can also be used to clean the residual adhesive. Note that tar remover is somewhat corrosive, so gloves should be worn when handling; 4. Use alcohol to wipe the residual adhesive until it is completely removed; 5. Apply essential balm to the adhesive marks, wait for 1 to 2 minutes until it fully penetrates the marks, then gently scrape them off with a plastic card or fingernail to clean the adhesive marks thoroughly.

6

4

Share

What does it mean when the ABS light comes on?

When the ABS light comes on, it indicates an issue with the Anti-lock Braking System (ABS). ABS is a technology developed by Robert Bosch GmbH for use in motorcycles and automobiles. It helps prevent loss of vehicle control and generally increases braking distance to enhance vehicle safety. The function of ABS is to automatically control the braking force during vehicle braking, preventing the wheels from locking up and ensuring maximum traction between the wheels and the road surface. In vehicles without ABS, emergency braking in critical situations can easily lead to wheel lock-up, meaning the steering wheel cannot be turned, which significantly increases the risk of severe consequences.

5

2

Share

How to Check if the Antifreeze is Low?

Methods to check if the antifreeze is low: Observe the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze, though it could also be caused by excessively high cylinder temperatures. Alternatively, you can directly open the engine hood to inspect the antifreeze reservoir. If the fluid level is below the minimum mark, do not continue driving—promptly add antifreeze. Antifreeze prevents the coolant from freezing in cold winter conditions, which could otherwise cause the radiator to crack or damage the engine cylinder block. Besides its anti-freezing properties, antifreeze also offers corrosion protection and aids in heat dissipation.

19

3

Share

When to Use the L Gear in a Car?

Car L gear is used when going down or up long slopes. L stands for low gear, which can fully utilize the transmission's engine braking to control the vehicle speed, reduce the burden on the brakes, and improve driving safety. When climbing a steep slope, selecting the L gear can make the vehicle more powerful in climbing and also protect the transmission. Automatic transmission usually refers to the car's automatic gear-shifting mechanism, where the automatic transmission's control system selects the appropriate gear based on the engine's speed and load during driving, replacing the driver's subjective judgment of timing and gear-shifting operations. Generally, automatic transmission cars have six gears, from top to bottom: P, R, N, D, S, L.

10

5

Share

What is the actual fuel consumption of the Swift 1.3 manual?

How to Identify Car Tire Markings?

How to One-Touch Power Window Control?

How to remove stickers on the car body?

What does it mean when the ABS light comes on?

How to Check if the Antifreeze is Low?

When to Use the L Gear in a Car?

How many kilometers does a car need to be serviced?

What colors are available for the Haval H6?

Where is the Changan Honor Fuse Box Located?

How to reset the maintenance light of Changan Suzuki SX4?