What is the actual fuel consumption of the RAV4?

1 Answers
OJayla
07/30/25 8:11am
The actual fuel consumption of the RAV4 2.0L ranges between 8.2~10.61; the 2.4L model ranges between 10.13~11.30; and the 2.5L model has an actual fuel consumption of 10.07. Reasons for the RAV4's fuel efficiency: 1. Transmission: The RAV4 is equipped with a CVT transmission, currently the world's most advanced simulated 10-speed CVT, widely used for its economical and fuel-efficient characteristics. 2. Aluminum Alloy: The RAV4's front engine hood and trunk lid are made of aluminum alloy, reducing vehicle weight and enhancing torsional resistance. Below are the MIIT fuel consumption data for the 2.5L model: 1. 2.5L naturally aspirated engine: MIIT fuel consumption is around 8L. 2. 2.5L hybrid version: Its fuel consumption is only between 4.7-5L.
Was this review help?
17
0
Share
More Forum Discussions

How to Identify Flood-Damaged and Accident-Damaged Vehicles?

Here are the steps to check for accident-damaged and flood-damaged vehicles: 1. Open the hood and check whether the radiator, air conditioning condenser, and front radiator panel (viewed from below) have any residual mud. 2. Inspect small components near the engine, the alternator, starter motor, wiring sockets, and the seams around the wheel wells for mud. 3. Flip over the front and rear seats to check the springs and inner fabric linings for residual mud and musty odors. 4. Examine the hidden seams around the rear wheel wells in the trunk (spare tire compartment) for trapped mud. 5. Check the internal structure of the dashboard, wiring, and socket connectors for residual mud. 6. Look for a distinct mud line in the middle pillar between the front and rear doors (covered by plastic trim), indicating the flood water level (due to numerous hard-to-clean seams inside the pillar). 7. Pry open the rubber seals around the front and rear windshields (from inside the car) with a screwdriver. If mud is present inside, it indicates a fully submerged vehicle. If the water level exceeded the hood, it is considered a total loss (fully submerged).
16
1
Share

What are the instructions for using the NFC function in the Mercedes-Benz E-Class?

NFC function (Near Field Communication), which is the interconnection between the phone and the vehicle, enables the phone to function as a car key, allowing the opening of doors and starting the Mercedes-Benz E-Class, as well as back-to-back data transmission between electronic devices (without the need to turn on Bluetooth). 1. Introduction: NFC stands for Near Field Communication, a short-range wireless communication technology initiated by Philips and jointly promoted by renowned manufacturers such as Nokia and Sony. 2. Usage scope: NFC devices can be used as contactless smart cards, smart card reader terminals, and device-to-device data transmission links.
3
5
Share

What does the inspection validity period mean?

The inspection validity period refers to the validity period of the driver's license inspection. Below are the required documents for driver's license inspection: 1. Identification: Resident ID card (for those holding ID cards from other provinces or cities, a temporary residence permit is also required) and a copy. 2. Original driver's license: The original motor vehicle driver's license and the currently held driver's license. 3. Photos: Three recent 1-inch white-background color photos. 4. Medical report: A qualified medical examination report from a district or county-level hospital or above. Such hospitals usually have medical examination points near the vehicle management office or traffic police station. 5. Application form: The applicant should obtain the 'Motor Vehicle Driver's License Application Form' at the vehicle management office and fill it out according to the instructions.
18
4
Share

What Are the Hazards of Flood-Damaged Cars?

Flood-damaged cars have the following hazards: 1. Hazard one: The biggest hazard lies in the electrical circuits, which may malfunction at any time, even leading to the car breaking down and failing to start. These faults are troublesome to diagnose and repair, and the maintenance costs are relatively high. 2. Hazard two: After being soaked in water, interior components such as seat foam, carpets, and soundproofing materials can breed mold and bacteria, leading to unpleasant odors and even viruses that pose health risks to passengers. 3. Hazard three: The metal surfaces of the car body will accumulate mud and sand due to water immersion, and the absorbed moisture will cause rust over time, affecting the strength and rigidity of the car body and creating safety hazards.
6
5
Share

What is the position of the car gear lever called?

The position of the car gear lever is called the gear shift console. Here is a detailed introduction about it: 1. Introduction 1: The gear lever, also known as the operation lever, is used on the car transmission and its main function is to support the car's gear shifting. 2. Introduction 2: The gear lever is a rod-like component, commonly divided into 1-2 gear levers, 3-4 gear levers, and five-gear levers. 3. Introduction 3: From a technical perspective, electronic gear levers have a high degree of freedom, with flexible and varied positions and forms. Currently, representative types include BMW's electronic wiring type, Mercedes-Benz's column-mounted type, Land Rover's rotary knob type, and Lincoln's button type.
15
4
Share

What is the function of a car tachometer?

The functions of a car tachometer are as follows: 1. Display engine speed: It reflects whether the engine is operating at normal speed and serves as a barometer for the engine's working condition. When the engine is idling or in neutral, the speed should be stable and within a reasonable range. When pressing the accelerator pedal in neutral, the speed should change smoothly with the steady rise and fall of the pedal. When holding the accelerator pedal steady, the tachometer needle should remain fixed at a certain speed mark. 2. Serve as a reference for manual transmission gear shifting: Selecting the appropriate gear shifting timing allows the engine to always operate within the most economical working range. The engine's torque reaches its maximum only within a certain range. Beyond this range, the torque will drop significantly, resulting in insufficient engine power, sluggish car acceleration, or even gear dragging and stalling.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.