What is the actual fuel consumption of the Qin Plus-DM-i?

1 Answers
SanPaige
07/29/25 10:57pm
The actual fuel consumption of the Qin PLUS-DM-i is 1.46L. Below is a detailed introduction to the Qin PLUS-DM-i: 1. The exterior adopts a minimalist design style, with a very clean and angular front face that exudes confidence. The oversized front grille features a fashionable blackened treatment for a cooler look. 2. The Qin PLUS-DM-i measures 4765x1837x1495 mm in length, width, and height, with a 2718 mm wheelbase, offering a very spacious interior. The trunk is also quite large, and the rear seats can be folded down, further enhancing practicality. 3. The 2021 BYD Qin PLUS-DM-i Super Hybrid is quite innovative, with significant technological advancements. Previous BYD hybrid models were prone to transmission failures, but this model eliminates the transmission entirely, featuring only a differential and a gearbox. The 1.5L 4-cylinder naturally aspirated engine delivers 110 horsepower.
Was this review help?
1
2
Share
More Forum Discussions

Are All New Energy Vehicles Charged?

New energy vehicles include some that do not require charging, but the majority of them do. Introduction to new energy vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of onboard power devices), integrating advanced technologies in vehicle power control and driving to form vehicles with advanced technical principles, new technologies, and new structures. Disadvantages of new energy vehicles: Charging is relatively difficult. In the context of incomplete charging infrastructure in China, charging is a major challenge for electric vehicles. The lack of public charging stations significantly impacts the mobility of electric vehicles. Charging is relatively slow. Although fast-charging stations are now available, it still takes about 2-3 hours to fully charge a new energy vehicle.
12
3
Share

Where is the oil dipstick for the Mercedes-Benz C260?

The oil dipstick for the Mercedes-Benz C260 engine is located next to the engine, identifiable by a yellow circular handle. This is the vehicle's engine oil dipstick. Concept of the oil dipstick: In automobiles, the oil dipstick is a commonly used measuring tool to check the oil level in the lubricant reservoir. Due to the curved path of the dipstick insertion hole, the dipstick must be able to deform upon insertion and rebound to its original shape when pulled out. Below are the prerequisites for checking the oil level: 1. The vehicle should be parked on a level surface; 2. If the engine is at normal operating temperature, it should be turned off for at least 5 minutes; 3. If the engine is not at operating temperature (i.e., the engine has been briefly started), it should be turned off for at least 30 minutes.
4
2
Share

At what speed does the car lane change assist activate?

Car lane change assist function requires the vehicle speed to reach 60 before it activates. Meaning of lane change assist: Lane change assist can also be called blind spot monitoring. This system is implemented through hidden sensors at the rear of the car and corner lights below the A-pillar or other methods to alert the driver of approaching vehicles from behind. Function of lane change assist: When changing lanes, if there is a vehicle approaching from behind, the lane change assist will issue an alarm to warn the driver, ensuring safe lane changing. However, there is a common misconception about lane change assist—it is only a warning device and cannot perform the lane change for you. Lane change assist alerts the driver of approaching vehicles from behind during lane changes, eliminating blind spots and improving driving safety, which is particularly helpful for novice drivers. The principle of lane change assist is similar to radar. When preparing to change lanes with the turn signal on, if the driver fails to notice other vehicles in adjacent lanes, the LED on the rearview mirror will flash to warn the driver to pay attention to safety.
16
3
Share

What is the reason for the pinko gear jam in the motorcycle speedometer?

Motorcycle speedometer pinko gear jam may be due to lack of lubrication in the bearings. Introduction to the speedometer: The function of the motorcycle speedometer is to display changes in driving speed, including the instantaneous speed of the vehicle, the engine speed, as well as the accumulated mileage. Driving speed is usually indicated by a pointer that constantly changes while driving. Other information is typically displayed using rolling numbers similar to those on an electric meter. Working principle of the speedometer: When the vehicle is in motion, the drive shaft rotates the permanent magnet, whose magnetic field induces eddy currents in the aluminum cup. The interaction between the eddy currents and the magnetic field of the permanent magnet generates torque that overcomes the spring force of the spiral spring, causing the aluminum cup to deflect in the direction of the permanent magnet's rotation. As a result, the aluminum cup turns the pointer by a certain angle.
6
1
Share

Where is the OBD Port on Nissan Sunny?

Nissan Sunny's OBD port is located beneath a storage compartment on the left side of the driver's cabin. Below is relevant information about Nissan Sunny: 1. The Sunny replaces its peanut-shaped headlights with sharp triangular streamlined ones, integrating twin-star arranged light clusters and inline embedded turn signals, exuding a crystal-clear fashionable charm that delivers a sharp visual impression. 2. Nissan Sunny employs an EFI dual-mode dual-port multi-point fuel injection system, which can provide precise and appropriate fuel injection based on different road conditions and engine load levels. Therefore, it offers more reliable air-fuel mixture and responsiveness compared to conventional electronic fuel injection systems. 3. The Sunny's suspension system adopts a front MacPherson and rear multi-link setup, balancing cornering tracking and straight-line stability. When maneuvering through traffic, the body maintains excellent stability, with steering wheel feedback being just right, allowing very precise control over the car's direction.
8
3
Share

What is the fuel tank capacity of the Hitachi 330 in liters?

The fuel tank capacity of the Hitachi 330 is 630L. The engine model of the Hitachi excavator: The engine model is Isuzu ISUZUAA-6HK1XQA, with a rated power (Kw/rpm) of 184/2000, a displacement (L) of 7.79, 6 cylinders, bore × stroke (mm×mm) of 115×125, water-cooled, and features direct injection, turbocharging, and an intercooler. Main dimensions of the Hitachi excavator: Overall transport length (mm) is 10970, overall transport width (mm) 3190, overall transport height (mm) 3230, full cab height (mm) 3140, counterweight ground clearance (mm) 1160, track contact length (mm) 3730, total track length (mm) 4640, track shoe width (mm) 600, total track width (mm) 3190.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.