What is the actual fuel consumption of the Prado 4.0?

1 Answers
ArthurAnn
07/30/25 9:20am
The average fuel consumption of the Prado 4.0 is 7-10L/100km. Relevant information is as follows: 1. Avoid unnecessary idling: Generally, a car consumes more fuel by idling for more than one minute than by restarting. Therefore, if the parking time is long, the engine can be turned off. 2. The impact of the environment on the vehicle: In summer, the vehicle's fuel consumption increases significantly, mainly due to the air conditioning. The fuel consumption in urban areas during summer can be 20%-30% higher than in spring and autumn, especially when parked outdoors. Fuel consumption will also increase when used in winter or cold regions because, under low-temperature conditions, the fuel injector's atomization ability is relatively poor, and the vehicle's lubrication system is affected by temperature, resulting in greater driving resistance and correspondingly increased fuel consumption.
Was this review help?
4
1
Share
More Forum Discussions

What is the problem when the brake light does not work?

The main reasons why the brake light does not work are as follows: 1. The brake light bulb is damaged. Since the bulb is used frequently, you can replace it with a new brake light bulb. Alternatively, check for poor contact and adjust the bulb if necessary. 2. A faulty brake light switch can also cause the brake light not to work. By connecting the brake light switch with a wire, if the bulb lights up, it means the switch is damaged and should be replaced. 3. A blown fuse can also result in the brake light not working. However, some cars do not have a separate brake light fuse but share it with other electrical devices. You can check the non-working electrical devices in the vehicle and replace their fuses accordingly.
4
1
Share

What is the Difference Between Drum Brakes and Disc Brakes?

The main differences between drum brakes and disc brakes are as follows: 1. Different braking methods. Drum brakes use hydraulic pressure to push the brake shoes against the inner edge of the brake drum during braking, generating friction to inhibit the rotation of the tires and achieve braking. Disc brakes have flat brake pads on both sides of the brake disc. When hydraulic pressure from the master cylinder is delivered to the wheel cylinder, the brake pads clamp onto the brake disc to achieve braking. 2. Different components. Drum brakes consist of a brake backing plate, wheel cylinder, brake shoes, related linkages, springs, pins, and the brake drum. Disc brakes are hydraulically controlled, with main components including the brake disc, wheel cylinder, brake caliper, and hydraulic lines.
7
5
Share

Do You Need to See the Hood While Driving?

Drivers need to see the hood while driving. During the driving process, the shape of the hood allows drivers to effectively adjust the direction and form of reflected light, thereby reducing the impact of light on the driver and providing a clear field of vision. The functions of the hood are as follows: 1. The car hood serves as an air deflector for high-speed movement in the air. 2. The hood also provides protection. In the event of a traffic accident where the hood suffers a frontal impact, the lines on the hood increase its rigidity, making it less prone to deformation and wrinkles. 3. The lines on the hood can enhance the overall image of the car, improving its aesthetics. Many sports cars have very prominent hood lines, which not only enhance the car's appearance but also reduce resistance and increase speed.
8
5
Share

How to Spray Windshield Washer Fluid on Peugeot 308?

To spray windshield washer fluid on the Peugeot 308, press and hold the control button on the right wiper control lever of the steering wheel for a few seconds. The Peugeot 308 is a compact sedan with a body length of 4558mm, width of 1805mm, height of 1505mm, and a wheelbase of 2612mm. It has a trunk capacity of 450 liters, equipped with an NFP engine featuring natural aspiration intake, delivering a maximum power of 86kw and a maximum torque of 150nm. The fuel supply system is multi-point electronic injection, and the car adopts a front-engine, front-wheel-drive layout with MacPherson independent front suspension and torsion beam non-independent rear suspension.
7
3
Share

Is the Bora produced by FAW-Volkswagen or SAIC?

The Bora is a compact sedan produced by FAW-Volkswagen, with a body length of 4663mm, width of 1815mm, height of 1462mm, and a wheelbase of 2688mm. The body structure is a 4-door, 5-seat sedan with a trunk capacity of 506 liters. The Bora incorporates Volkswagen's new design language, including a streamlined body design, three-section rear styling, 16-inch alloy wheels, and wedge-shaped chrome fog lights, equipped with a new LED headlight assembly. The Bora has a fuel tank capacity of 50 liters, powered by the EA211DMB engine with a naturally aspirated intake system, inline cylinder arrangement, aluminum alloy cylinder head and block, and multi-point electronic fuel injection. It is paired with either a 5-speed manual transmission or a 6-speed automatic transmission.
18
2
Share

How to Connect Bluetooth for the 8th Generation Honda Accord?

Honda Accord 8th generation Bluetooth connection method: 1. Turn on the mobile phone Bluetooth and enable the phone's discoverable mode; 2. Start the car's power supply; 3. Enter the car's Bluetooth audio system and activate the vehicle Bluetooth; 4. On the phone, click to connect the corresponding vehicle Bluetooth device to complete pairing. The 8th generation Honda Accord is a B-segment sedan launched by GAC Honda, equipped with an inline 4-cylinder 16-valve i-VTEC DOHC engine and a 5AT transmission, with a displacement of 2354 ml, maximum power of 132 kW, maximum torque of 224 Nm, and front-wheel drive configuration.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.