What is the actual fuel consumption of the Polo 1.6?

1 Answers
Vicki
07/29/25 6:57pm
The actual fuel consumption of the Polo 1.6 is 5.5 liters per 100 kilometers. There are many factors that affect actual fuel consumption, and the actual comprehensive fuel consumption depends on the actual driving conditions. Method to determine fuel consumption: You can judge the fuel consumption through the car's dashboard, where F=full (representing full) and E=empty (representing empty). When the fuel tank warning light comes on, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial recorded mileage from the current mileage, then divide by the amount of fuel consumed to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but higher fuel consumption does not necessarily mean larger displacement. In a relative sense, the size of a car's engine displacement does not directly correlate with fuel consumption. Besides engine size, factors such as the car's shape, weight, and engine technology are also important factors affecting fuel consumption. Among models with the same displacement, the more advanced the engine technology, the more fuel-efficient the car will be.
Was this review help?
13
3
Share
More Forum Discussions

What does it mean for an off-road vehicle to have two locks?

Here is an introduction to the two locks in off-road vehicles: 1. The two locks in off-road vehicles refer to differential locks. 2. It is a special type of differential that can lock the differential housing and the half-shaft into one unit when one driving wheel slips, causing the differential to lose its differential function, thereby transferring all torque to the other driving wheel to achieve the best escape state. Below is extended information about differentials: 1. The differential is one of the components inside a car, and its function is to ensure the transmission of power to the left and right half-shafts while allowing them to rotate at different speeds. 2. The working principle and function of the differential lock are to lock the differential, allowing the vehicle to evenly distribute power to the front and rear drive axles and left and right half-shafts under any circumstances. Theoretically, when three wheels are stuck, as long as one wheel still has traction, the vehicle can usually escape forcefully on its own. 3. The number of differential locks on an off-road vehicle varies depending on the vehicle's positioning. Those designed for extreme off-roading are generally equipped with two differential locks on the front and rear axles as standard, hence the term "two locks." 4. Theoretically, the more differential locks an off-road vehicle has, the stronger its off-road capability.
9
1
Share

What to Do If 95 Gasoline Is Mistakenly Filled with 92?

Filling a car designed for 95 gasoline with 92 by mistake will not affect the vehicle, but the two types of gasoline should not be mixed for long-term use. Here is more information about gasoline: 1. Gasoline appears as a transparent liquid, is flammable, with a distillation range of 30°C to 220°C, and is classified into grades such as 90, 93, 95, and 97 based on octane ratings. 2. The mixtures of 92 and 95 gasoline are essentially the same, but the proportions of the mixtures differ. Long-term mixing of different grades of gasoline can reduce anti-knock performance, causing the engine to self-ignite before the designated ignition time, which may lead to confusion in the engine's ignition system, engine shaking, and in severe cases, damage to the car's engine.
3
1
Share

How to Identify the Manufacturing Date of Tires?

The manufacturing date of tires is marked on the outer side of the tire. You don't need to flip the tire over; there is a set of numbers on the sidewall of the tire. From the last four digits of this set of numbers, you can obtain the production date information. It consists of four digits, 'aabb', where the first two digits 'aa' indicate the week of the year, and the last two digits 'bb' indicate the year. Here is more information about car tires: 1. The 11-digit number and letters immediately following the 'DOT' letters on the tire sidewall represent the tire's identification number or serial number. 2. When replacing tires, always ensure that the replacement tires match the size specifications of the vehicle's original tires and that all four tires on the vehicle have consistent size specifications.
5
1
Share

What is the meaning of VIN code?

VIN code is the abbreviation of Vehicle-Identification-Number, which contains information such as the vehicle manufacturer, year, model, body type and code, engine code and assembly location. Here is more information about VIN code: 1. The VIN code is a 17-digit alphanumeric code, also known as the 17-digit identification code, chassis number or 17-digit number. 2. The VIN code is a code that identifies the vehicle. It is a set of characters assigned by the manufacturer to identify a vehicle. The generation of this number follows specific rules, corresponding to each vehicle one by one, and ensures that it will not be repeated worldwide within fifty years.
1
3
Share

What is the fuel consumption of the old Mazda6?

According to the comprehensive data from the Ministry of Industry and Information Technology, the fuel consumption of the old Mazda6 is 7.8L/100km. Here are some relevant details about the old Mazda6: 1. Body dimensions: The length, width, and height are 4670mm, 1780mm, and 1435mm respectively. The wheelbase is 2675mm. 2. Powertrain: Equipped with a 2.0L naturally aspirated 4-cylinder LFX engine, with a maximum horsepower of 147Ps, paired with a 6-speed manual transmission. 3. Chassis: The drivetrain is front-wheel drive, the front suspension is a double-wishbone independent suspension with a stabilizer bar, and the rear suspension is a multi-link independent suspension.
6
5
Share

What does the i-vtec engine mean?

i-vtec engine means Variable Valve Timing and Lift Electronic Control System. The following are the maintenance methods for the engine: 1. Use qualified engine oil. 2. Use qualified coolant. 3. Regularly clean the water tank scale. 4. Regularly remove carbon deposits from the engine. 5. Replace the vehicle's air filter, oil filter, and fuel filter on time. 6. Check the condition of the spark plugs. 7. Maintain normal engine speed. The following are extended notes on precautions when using a car engine: 1. Avoid driving in neutral gear. The engine itself has a fuel cut-off function during deceleration, and driving in neutral is not conducive to fuel economy. 2. Pay attention to observation when using the vehicle. If oil is found on the ground, determine whether there is an engine oil leak and communicate with the car 4S store in time to eliminate potential safety hazards. 3. For cars equipped with a turbocharger, do not turn off the engine immediately after high-speed driving or climbing. Let it idle for 10 minutes before turning it off. 4. When brake fluid is mixed with or absorbs water, or if impurities or sediments are found in the brake fluid, it should be replaced or carefully filtered in time.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.