What is the actual fuel consumption of the Peugeot 4008?

1 Answers
AllisonMarie
07/29/25 4:09pm
The comprehensive fuel consumption of the Peugeot 4008 is 6.2-6.4L/100km. There are currently 6 models of the Peugeot 4008 on sale: the Creation Edition, Technology Edition, Technology Edition, Strength Edition, and Sharp Edition, with a comprehensive fuel consumption of 6.2L/100km. The Ultimate GT Edition has a comprehensive fuel consumption of 6.4L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 7.0-10.5L/100km. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits in the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. If the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and send incorrect information to the engine control unit, causing incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in older vehicles, various faults may inevitably occur.
Was this review help?
15
4
Share
More Forum Discussions

How to Remove the Headlight of a Teana?

The method to remove the headlight of a Teana: Open the engine hood, remove the bumper, unscrew the bolts connected to the fender, and then the headlight assembly can be taken out. Be careful to protect the headlight wiring harness. Car headlights are sealed, and generally, the assembly is sealed with adhesive, which comes in two types: cold adhesive and hot adhesive. The Teana is a mid-size car under Nissan. Taking the 2021 Teana Fashion Edition as an example, its body dimensions are 4901mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2825mm. In terms of power, the 2021 Teana Fashion Edition is equipped with a 2.0L inline four-cylinder naturally aspirated engine, with a maximum power of 115kW and a maximum torque of 197Nm, paired with a continuously variable transmission.
15
5
Share

What is the foam pad under the car trunk called?

The panel under the trunk lid is called a trunk mat, which integrates functions such as water absorption, dust absorption, stain removal, sound insulation, and protection of the trunk carpet. The trunk mat can protect the car trunk, preventing dirt or liquids from entering and eroding the trunk surface. It also prevents items in the trunk from sliding, reducing the likelihood of interior contamination and damage. The thick base material can block noise from the chassis and tires, improving driving comfort. Here are some key points for selection: 1. Check the pattern: The anti-slip feature of the trunk mat comes from its surface texture, which fits well with the car surface to prevent slipping and ensure the safety of items, especially important for storing glass products. 2. Consider environmental friendliness: When purchasing a trunk mat, always check for any unpleasant odors. Avoid buying cheap products with strong odors, as they can pollute the air inside the car, harbor bacteria, and harm the owner's health over time. 3. Assess comfort: A good trunk mat also has sound insulation and noise reduction capabilities, is resistant to cold, high temperatures, and moisture, making it suitable for year-round use without frequent replacement.
8
0
Share

How to Check the Tire Pressure Monitoring on Toyota Prado?

Toyota Prado's tire pressure monitoring can be found on the instrument panel. There is a car icon in the center of the instrument panel, which displays the tire pressure of all four tires. With the tire pressure monitoring system, you can ensure that the tires always operate within the specified pressure and temperature range, thereby reducing tire damage. Uneven tire pressure can also lead to braking deviation, increasing wear on the suspension system. The Prado is a mid-to-large SUV under FAW Toyota. Taking the 2019 Prado 3.5L Automatic TX-L Premium Edition as an example, it is powered by a 3.5L V6 engine with a maximum power of 206 kW and a maximum torque of 365 Nm. In terms of dimensions, the 2019 Prado 3.5L Automatic TX-L Premium Edition measures 5010 mm in length, 1885 mm in width, and 1890 mm in height, with a wheelbase of 2790 mm, featuring a 5-door, 7-seat SUV layout.
10
1
Share

What gear should be used when driving a manual transmission car uphill?

What gear to use when driving a manual transmission car uphill depends on the vehicle's displacement and the steepness of the slope. 1. For high-displacement vehicles on gentle slopes, you can use 2nd or 3rd gear for climbing. 2. For low-displacement vehicles on gentle slopes, 2nd gear is usually sufficient, while 3rd gear may not be suitable for some slopes. 3. For very steep slopes, it's recommended to use 1st gear regardless of the vehicle's displacement. Additional information about uphill driving: 1. Don't use too high a gear when going uphill because climbing requires power. Using too high a gear may result in insufficient power, making the vehicle struggle to ascend. 2. Understand your vehicle's climbing capability. For most ordinary cars, 3rd gear is usually adequate for climbing. When carrying passengers, 2nd gear should be sufficient.
15
0
Share

Does the Teramont belong to FAW-Volkswagen or SAIC Volkswagen?

The Teramont is an SUV model produced by SAIC Volkswagen, similar models include the Tiguan and Tiguan L. SAIC Volkswagen and FAW-Volkswagen are two independent companies, and the models they produce are completely different. Below is more information about SAIC Volkswagen and FAW-Volkswagen: 1. SAIC Volkswagen: Hatchback models include the POLO series, Gran Lavida series, and Santana hatchback series; Sedan models include the Santana, Lavida, Lamando, Passat, and Phideon; In the SUV and MPV segment, there are the Teramont, Tiguan, and Touran L. 2. FAW-Volkswagen: Hatchback models include the Golf and POLO; Sedan models consist of the Bora and Lavida, Sagitar and Lamando, Magotan, CC, and Passat; The MPV model is the Golf Sportsvan; SUVs include the T-Roc.
15
0
Share

What Causes the Abnormal Noise in the 10th Generation Civic's Air Conditioning System?

There may be several reasons for the abnormal noise in the 10th Generation Civic's air conditioning system: 1. Dirty air conditioning filter: A dirty filter can cause excessive noise and abnormal sounds. 2. Debris in the blower fan blades: Foreign objects in the blower fan blades can lead to abnormal noise. You can test this by turning on the blower fan without starting the engine to see if the noise occurs. If it does, the issue is likely with the blower fan. 3. Fan problems: Deformed fan blades or a damaged fan motor in the car's air conditioning system. 4. Worn clutch bearing: A worn clutch bearing in the air conditioning pump can cause the engine noise to increase when the air conditioning is turned on. This component cannot be replaced separately and requires the replacement of the entire air conditioning pump assembly.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.