What is the actual fuel consumption of the old Magotan?

2 Answers
DeMolly
07/24/25 4:24am
The fuel consumption of the old Magotan is about 8.3L per 100 kilometers, which may vary depending on driving habits. Here are some methods to reduce fuel consumption: Check the air conditioning system: Air conditioning malfunctions are a significant cause of high fuel consumption. Poor cooling performance can lead to increased fan speed and lower temperatures to achieve a cooling effect. Frequent hard braking: Frequent hard braking is a major reason for consistently high fuel consumption. While ensuring safe driving, make full use of the vehicle's inertia. Small-displacement cars are not recommended to keep the air conditioning on all the time: For vehicles exposed to the sun, it is not advisable to turn on the air conditioning immediately after getting in. First, open the windows and set the fan to a higher speed without turning on the air conditioning to expel the hot air inside. Wait until the vehicle has cooled down moderately before turning on the air conditioning.
Was this review help?
6
3
Share
McKeira
08/11/25 12:01am
I've been driving an old Passat for many years, and the actual fuel consumption is generally around 8 to 10 liters per 100 kilometers. In city driving, it can rise to 10 to 12 liters due to frequent traffic lights and congestion, while on the highway, it drops to 6 to 8 liters, which is more economical. During daily use, I've noticed that sudden acceleration and braking can cause fuel consumption to spike, especially as the engine ages and performance declines, making regular maintenance crucial. Keeping tire pressure at the correct level and avoiding carrying heavy loads can also help reduce fuel consumption. If you frequently commute, I recommend sticking to smoother routes and avoiding unnecessary acceleration to keep fuel consumption within a reasonable range and save money.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Should You Shift to P Gear or Turn Off the Engine First When Parking an Automatic Car?

For an automatic car, you should shift to P gear before turning off the engine. The correct parking sequence is: press the brake pedal, shift to N gear, engage the handbrake, shift to P gear, release the brake pedal, and then turn off the ignition with the key. However, as transmission technology has become increasingly advanced, even if you turn off the engine before shifting to P gear, the impact on the car's transmission is minimal. It's important to note that whether you turn off the engine in P gear or N gear, you must firmly engage the handbrake before releasing the foot brake. Only by firmly applying the handbrake can you truly prevent the car from moving. The P gear functions similarly to shifting into first gear in a manual transmission to prevent the car from rolling. If you're parking for a short period, there's no need to shift to P gear. For example, when waiting at a traffic light, since the duration is brief, shifting to P gear would require restarting the car, which is time-consuming. In such cases, you can simply shift to N gear and engage the handbrake. When the light turns green, you can proceed directly from N gear. Additionally, if a car behind you collides with your car at this moment, the transmission may sustain some damage.
18
1
Share

What are the symptoms of poor contact in a car battery?

The symptoms of poor contact in a car battery include the battery terminals becoming hot to the touch or sparking. Poor battery contact can lead to unstable idling, damage to the battery, and may also harm the generator. The main grounding cable between the battery and the car body is a thick power ground wire, typically connected to the car's frame, which handles the current flow from various parts of the vehicle. Below is an introduction to car battery maintenance: 1. The electrolyte level should always be maintained between max and min. Check monthly and top up with distilled water (pure water) as needed, but never add acid. 2. When the battery voltage is low and the lights are dim or the engine struggles to start, perform an external charge promptly. 3. Avoid overcharging or prolonged undercharging of the battery. Overcharging can cause active material to shed, while undercharging can lead to plate sulfation. Ensure the regulator voltage is neither too high nor too low. 4. During use, regularly check that the vent holes are clear to prevent battery deformation or explosion. 5. Keep the battery away from heat sources and open flames. Ensure ventilation during charging and use to prevent burns or injuries. 6. Avoid prolonged high-current discharge. Each engine start should not exceed 5 seconds, with a 10-15 second interval between consecutive starts. 7. Secure the battery firmly in the car to minimize vibration. 8. Regularly inspect the battery connections for tightness. All live terminals must maintain good contact to prevent sparking, which could cause battery explosion. Remove any oxides or sulfates from the battery terminals and apply petroleum jelly to prevent further corrosion.
12
2
Share

Where is the reverse radar module located on the Envision?

The yellow circle indicates the reverse radar. The reverse radar is a safety assist device for parking or reversing, which can inform the driver of surrounding obstacles through sound or more intuitive displays. It eliminates the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, and helps the driver overcome blind spots and unclear vision. The functions of the reverse radar: The reverse radar is a safety assist device for parking or reversing, which can inform the driver of surrounding obstacles through sound or more intuitive displays. It eliminates the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, and helps the driver overcome blind spots and unclear vision. The main functions of the reverse radar include: Accurately measuring the distance between the rear of the vehicle and the nearest obstacle; emitting rapid warning sounds when reversing to the limit distance to remind the driver to brake; repeatedly emitting voice warnings to alert pedestrians.
17
0
Share

How many cylinders does the Boyue Pro 1.8T engine have?

Boyue Pro 1.8T is equipped with a four-cylinder engine, and it also offers another 1.5T three-cylinder engine option. Working principle of a four-cylinder engine: It generally converts chemical energy into mechanical energy. Sometimes, the term 'engine' can refer to both the power generation device and the entire machine including the power unit, such as gasoline engines and aircraft engines. The main component of an engine is the cylinder, which serves as the power source of the entire vehicle. Applications of four-cylinder engines: The main structure of a four-cylinder engine consists of components such as the cylinder block, crankcase, cylinder head, and cylinder gasket. Main applications: commonly used in car engines, motorcycles, chainsaws, and other small-power machinery.
5
3
Share

Where is the start-stop battery located in the Mercedes-Benz GLE?

The battery of a Mercedes-Benz is located under the cover panel in front of the windshield on the right side of the engine compartment. Simply open the hood to access the battery. Daily precautions to note: Avoid long-term outdoor parking: Avoid leaving the car parked in an open-air parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent damage from freezing. Pay attention to starting time: Car engines are harder to start in winter. Each attempt to start the engine should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. If the engine fails to start after multiple attempts, check other potential issues such as the electrical circuit, ignition coil, or fuel system. Avoid continuous, repeated starting attempts, as this can lead to battery damage due to excessive discharge.
13
0
Share

Where is the radar module of Mercedes-Benz C180?

The reversing radar module of Mercedes-Benz vehicles is generally located inside the rear trunk, on the left or right side. Alternatively, you can trace the wiring of the reversing radar to see where it ultimately leads. Function of the reversing radar: Accurately measures the distance between the rear of the car and the nearest obstacle; when reversing to the limit distance, it emits rapid warning sounds to alert the driver to brake; it can repeatedly emit voice warnings to remind pedestrians to pay attention. Working principle of the reversing radar: When reversing, the reversing radar uses ultrasonic principles. The sensor installed on the rear bumper sends ultrasonic waves that reflect off obstacles, then calculates the actual distance between the car body and the obstacle, providing this information to the driver to make parking or reversing easier and safer.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.