···
Log in / Register

What is the actual fuel consumption of the Mazda CX-30?

1 Answers
DeLucille
09/01/25 6:49am
The Mazda CX-30 has a total of 8 models currently on sale. Among them, the 2020 2.0L X Spark Ignition Premium model is equipped with a 180-horsepower engine, with an NEDC fuel consumption of 5.5L per 100km. The seven models of the 2021 2.0L automatic series—Basic Comfort, Elegant Comfort, Premium Comfort, Shining Comfort, Noble Comfort, Classic Comfort, and Manual Classic Comfort—are equipped with a 158-horsepower engine, with an NEDC fuel consumption of 6.1L per 100km. The fuel tank capacity of the Mazda CX-30 is 51L. The distance that different models can travel on a full tank of fuel is as follows: Models equipped with the 180-horsepower engine can travel 51/5.5*100=927km on a full tank. Models equipped with the 158-horsepower engine can travel 51/6.1*100=836km on a full tank. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline to burn for work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline is less likely to vaporize during a cold start, requiring more gasoline to burn, which increases fuel consumption. Additionally, at low temperatures, the engine's computer controls higher RPMs to warm up the car, which also increases fuel consumption.
Was this review help?
19
3
Share
More Forum Discussions

How to Start a Passat When the Battery is Dead?

If your Passat's battery is dead, you can jump-start the vehicle using another car's battery. Here are the detailed steps: 1. When the Passat's battery is dead, you can either jump-start it or use a portable car jump starter. If the battery is drained or leaking, it should be replaced; otherwise, the vehicle may fail to start, and electrical components inside the car may lose power. 2. When the battery gauge indicates low charge, recharge it promptly. If you run out of battery while driving and the engine stalls, as a temporary solution, you can seek help from another vehicle. Connect the negative terminal of the dead battery to the negative terminal of the working battery, and the positive terminal to the positive terminal to jump-start your Passat.
17
1
Share

What does the small wrench indicator light on the dashboard mean?

The small wrench is a maintenance indicator light, not a sign of vehicle malfunction. It simply serves as a maintenance reminder. This light typically appears during the self-check when turning the ignition key, and can be reset after completing the maintenance service. The purpose of the maintenance indicator is to remind drivers to service their vehicles after reaching certain mileage intervals. Key information about vehicle maintenance includes: 1. Vehicle maintenance refers to periodic preventive work involving inspection, cleaning, replenishment, lubrication, adjustment or replacement of certain components. 2. Generally, maintenance intervals are set between 5,000 to 8,000 kilometers. 3. Regular maintenance helps maintain optimal vehicle performance, while neglecting it may cause unnecessary damage and compromise driving safety.
10
0
Share

How to Solve the Problem of a Car Not Starting?

The reasons and solutions for a car not starting are as follows: 1. The steering wheel is locked: When parking, if the steering wheel is not straightened, it can easily get locked, making it impossible to turn the key and start the car. Solution: Straighten the steering wheel. 2. Insufficient fuel: When the fuel level is close to the warning mark, it's necessary to refuel in time. Solution: Refuel the car. 3. The car battery is dead: The car battery is a consumable item, and it's recommended to replace it every 2-3 years. Solution: Use a jump start to solve the problem. 4. The fuel filter is clogged. Solution: Clean the fuel filter.
4
0
Share

How to Check if a Car Meets China 5 or China 6 Emission Standards?

To determine whether a car meets China 5 or China 6 emission standards, you can use the following methods: 1. Check the vehicle's factory certificate; 2. Refer to the vehicle's environmental standard list; 3. Examine the vehicle conformity certificate. China 5, officially known as the National Fifth Stage Motor Vehicle Pollutant Emission Standard, and China 6, the National Sixth Stage Motor Vehicle Pollutant Emission Standard, both regulate the permissible levels of harmful gases emitted from vehicle exhaust, including carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. The differences between China 5 and China 6 standards are: 1. Different carbon monoxide emission requirements: China 5 allows 1000 milligrams per kilometer, while China 6 reduces this to 500 milligrams per kilometer. 2. Different particulate matter emission requirements: China 5 permits 5 milligrams, whereas China 6 lowers this to 3 milligrams.
14
1
Share

What Are the Gear Shifting Techniques for Beginner Drivers?

Here are the gear shifting techniques for beginner drivers: 1. Remember the principle of "accelerate before upshifting, decelerate before downshifting" when changing gears. Before upshifting, press the throttle to increase the speed first, and before downshifting, release the throttle to reduce the speed first. 2. Upshifting. When shifting gears, use the "double-clutching method". For upshifting, follow the principle of "press (clutch), shift (to neutral), press (clutch), shift (to higher gear)". Quickly press the clutch pedal twice to easily shift to a higher gear. 3. Downshifting. When downshifting, follow the principle of "press (clutch), shift (to neutral), release (clutch), rev (throttle), press (clutch), shift (to lower gear)". Press the clutch twice, and after the first press, rev the engine briefly before pressing the clutch pedal a second time to shift to a lower gear.
10
5
Share

How Often Should a Mazda's Battery Be Replaced?

Mazda batteries typically last 3-6 years. Here are methods to prevent car battery discharge: Start the battery periodically: Car batteries gradually discharge when left unused for extended periods. Vehicles parked long-term should be started at regular intervals to recharge the battery. Recharge an insufficient battery promptly: If the ammeter shows insufficient charge while driving, recharge immediately. If the battery dies mid-trip and the car won't start, seek assistance from passing vehicles for a jump start by connecting both batteries' negative to negative and positive to positive terminals. Drivers are advised to carry jumper cables.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.