What is the actual fuel consumption of the Lynk & Co 02?

1 Answers
Mike
07/29/25 11:35pm
1.5t engine consumes approximately 8.5 liters per 100 kilometers, while the 2.0t engine consumes about 9.0 liters per 100 kilometers. The Lynk & Co 02 is a compact SUV equipped with three engines: a low-power version of the 1.5-liter turbocharged engine, a high-power version of the 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine. Below are the detailed specifications of the Lynk & Co 02 engines: 1. Low-power version: The low-power 1.5-liter turbocharged engine delivers a maximum power of 115kw and a maximum torque of 245 Nm, with the maximum power achieved at 5000 rpm and the maximum torque available from 1450 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. High-power version: The high-power 1.5-liter turbocharged engine produces a maximum power of 132kw and a maximum torque of 265 Nm, with the maximum power achieved at 5500 rpm and the maximum torque available from 1500 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
Was this review help?
12
2
Share
More Forum Discussions

Is It Correct to Use the Left Foot for Braking and the Right Foot for Acceleration? What Is the Middle One?

Using the left foot for braking and the right foot for acceleration is correct, and the middle one is the clutch. Below is a brief introduction to smooth braking: 1. Light braking over a long distance: In the technique of light braking over a long distance, advanced braking skills ensure that passengers do not feel any impact. The prerequisite is correctly assessing the road and traffic conditions ahead. First, release the accelerator pedal, then perform the braking operation based on distance and speed. 2. Braking on dirt roads or loose sand surfaces: Braking on dirt roads or loose sand surfaces still poses risks. This applies not only to rural roads but also to urban asphalt roads. Due to urban construction, loose soil or sand particles may accumulate on both sides of the road, so it is essential to use emergency braking cautiously. 3. Preventing 'nodding' during braking: If the braking distance is sufficient, press the brake pedal slowly and continuously to decelerate evenly. As the vehicle is about to stop, gradually release the brake pedal until it comes to a complete stop. In short, control the force of your right foot. 4. Braking techniques on curves: When approaching a curve, brake before entering, slow down to enter the curve smoothly, and then accelerate out of the curve. While braking on a curve, steer the wheel and adjust the vehicle's posture according to the curve's arc. Avoid slamming the brakes, especially for vehicles in the outer lane, to prevent loss of control.
1
2
Share

How to Revive a Car Battery That Has Been Sitting for a Long Time?

How to revive a car battery that has been sitting for a long time mainly depends on whether the battery can still be charged. If it can still be charged normally, simply follow the standard charging procedure to fully charge the battery, and it should return to normal. If the battery cannot be charged, you can use the activation mode of a smart charger to revive the battery before charging it. A car battery, also known as a storage battery, is a type of battery that converts chemical energy into electrical energy. The commonly referred-to car battery is a lead-acid battery, which primarily uses lead and its oxides as electrodes and a sulfuric acid solution as the electrolyte. Tips for maintaining a car battery: 1. Clean the battery regularly; 2. Reduce electrical usage when the engine is off; 3. Replace the battery periodically; 4. Start the car regularly.
4
0
Share

Do Car Decals Need to Be Registered?

Decals on the exterior of a car generally do not require registration, but large-scale body advertisements do. Car decals, an earlier colloquial term now referred to as car stickers, originated from motorsports. Precautions for Car Decals: The ideal working environment for applying decals is between 15°C and 30°C. High temperatures can cause the film to expand and the wet solution to evaporate quickly, while low temperatures can affect the flexibility of the film, thereby impacting adhesion. Thoroughly clean the car's surface with water and a neutral cleaner. To ensure proper application of the decal, the car's surface must be free of dust, wax, and other contaminants. Car decals consist of three layers: the backing paper (white glassine paper), the PVC decal itself, and the transfer film with protective film (transparent). The top protective film should be removed only after the final application. During the process, avoid pulling the decal forcefully to prevent stretching and deformation. Points to Note for Vehicle Modifications: First, technical parameters such as the car's displacement must never be modified privately. For example, some people exploit loopholes by purchasing new cars with smaller displacements that have lower purchase taxes and then privately upgrade the displacement significantly. This is not only a serious legal violation but also poses significant safety hazards. Second, widening tires, modifying the intake system, or exhaust system is also prohibited. These modifications can alter the vehicle's performance and severely affect driving safety. If discovered, fines will be imposed, and the vehicle must be restored to its original condition. Third, for non-professional off-road competition vehicles, modifications that enhance off-road performance, such as raising the chassis, are not allowed.
15
3
Share

What are the requirements for installing a charging pile?

Automobile charging pile installation requirements include: consent from the residential property management and having a fixed parking space within the community. Steps for installing an automobile charging pile: Step 1: Apply for confirmation from the property management. Understand the community's charging pile installation policy, inspect the installation environment, and if additional technical equipment is required, apply to the community in advance. Generally, a fixed parking space is needed. Step 2: Determine the location of the parking space. Most communities have a power distribution room, and the distance between the parking space and the distribution room becomes a decisive factor in cost control—the closer the distance, the lower the cost. Step 3: Prepare materials and apply to the power company. Required materials include: a copy of the ID card, proof of parking space ownership, and an installation agreement signed by the property owner. Step 4: Inspection and installation. After receiving the application, the power company will conduct an on-site inspection, requiring the presence of the property engineer, charging pile company, power company, and the owner to finalize the construction plan. Depending on the distance between the parking space and the distribution room, the construction time varies, ranging from a few hours to a day. Step 5: Acceptance. After completion, the charging pile company needs to report to the power company. Upon passing the power company's inspection, they will stamp the approval and issue the corresponding electricity card.
6
3
Share

How Often Should a Sedan Be Topped Up with Water?

How often a sedan needs to be topped up with water depends on the scale of the car's radiator. When the coolant level in the radiator falls below the MIN mark, it indicates that water needs to be added. It's important to note that the water added here refers to antifreeze, not tap water. The full name of antifreeze should be called antifreeze coolant, which refers to a coolant with antifreeze properties. It prevents the coolant from freezing in cold winter conditions, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers multiple functions, including preventing freezing in winter, boiling in summer, and protecting against scale and corrosion throughout the year.
7
5
Share

How to reset the maintenance light on Dongfeng Citroen C5?

Dongfeng Citroen C5 maintenance light reset method: 1. Turn off the ignition switch and rotate the key to the S position to lock the steering wheel; 2. Press and hold the odometer reset button continuously; 3. Turn on the ignition switch, the odometer will display a countdown, release the button when 0 appears and the wrench symbol disappears; 4. After the operation is completed, wait at least five seconds to ensure the reset setting is fully stored. The Dongfeng Citroen C5 is a model launched by Dongfeng Citroen, with dimensions of 4825mm in length, 1860mm in width, and 1480mm in height, and a wheelbase of 2815mm.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.