What is the actual fuel consumption of the Livina?

1 Answers
LeMichael
07/29/25 8:45pm
The official combined fuel consumption of the Livina is 6.3 liters per 100 kilometers, while the actual fuel consumption ranges between 6 to 7.5 liters per 100 kilometers. During actual driving, factors such as driving habits and road conditions can cause the real fuel consumption to differ from the theoretical value indicated. Here are some tips to reduce fuel consumption: 1. Avoid opening windows at high speeds: Driving with windows open on highways allows more wind to enter the car, increasing driving resistance. 2. Driving habits: Good gear-shifting habits can save a significant amount of fuel for the owner. 3. Maintain proper tire pressure: If the tire pressure is too low, the vehicle's friction resistance increases, leading to higher fuel consumption. 4. Use fuel cleaners: Cleaners can remove gum and dirt from the fuel system, saving fuel, reducing exhaust emissions, and preventing component corrosion and rust. 5. Avoid overloading: Long-term overloading can damage car components.
Was this review help?
7
2
Share
More Forum Discussions

How to switch the four-wheel drive of the Envision?

The four-wheel drive switching method of the Envision is: the vehicle will automatically switch according to road conditions, and no manual intervention by the driver is required. Taking the Envision 2021 532T two-wheel drive leading model as an example, it is a medium-sized 5-door 5-seat SUV with dimensions of length 4694mm, width 1839mm, height 1686mm, and a wheelbase of 2750mm. The Envision 2021 532T two-wheel drive leading model is equipped with a 1.5T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 124 kilowatts and a maximum torque of 250 Newton meters. Its drive mode is front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a multi-link independent suspension.
19
1
Share

Can the Passat continue to be driven when the EPC light is on?

Passat cannot continue to be driven when the EPC light is on. EPC: EPC is the abbreviation for the Electronic Throttle Control system, which assists in engine power control. It involves many components, including the engine control unit, electronic throttle body, accelerator pedal position sensor, brake switch, clutch switch, power steering switch, alternator load, wiring, etc. If any of these components malfunction and cause inaccurate power control by the engine control unit, the EPC warning light will activate. It is recommended to take the vehicle to a specialized repair shop for a comprehensive inspection of these components. Reasons for the indicator light and solutions: There may be a fault in the electronic throttle control system; the brake switch may be damaged. Clean carbon deposits in the throttle body area; after cleaning, use specialized diagnostic equipment to relearn and match the throttle position. The normal opening degree should not exceed 2.0%.
1
1
Share

Can Temporary License Plate 114 Check the Vehicle Owner?

Temporary license plate 114 can check the vehicle owner. Unregistered vehicles: Unregistered passenger vehicles that need to temporarily drive on the road should affix two temporary vehicle license plates simultaneously. One method is to paste it in the lower left or right corner of the front windshield inside the car, in a position that does not obstruct the driver's view. Another method is to paste it in the lower left corner of the rear windshield inside the car. Using fake temporary plates: Using fake temporary plates is considered using forged motor vehicle license plates, which is one of the serious illegal activities targeted by traffic management authorities. Traffic police can detain and tow away the motor vehicle and impose administrative detention of up to 15 days on the driver. For new vehicles on the road, checking whether the temporary plates are genuine and valid has become a routine task. On the back of the temporary plates, the vehicle's chassis number is indicated, along with the validity period, so trying to slip through is not feasible.
15
1
Share

What are the body dimensions of the Jetta VS5?

Jetta VS5 body dimensions: length 4419mm, width 1841mm, height 1616mm, wheelbase 2630mm. The Jetta VS5 features a Chinese armor-inspired grille paired with LED headlights and daytime running lights, highlighting its sporty feel while also outlining the ruggedness typical of SUV models. The Jetta VS5 is the first SUV model under the Jetta brand, with a front face incorporating Volkswagen's X design elements, extending bidirectionally to the hood and lower grille. The side body lines follow Volkswagen's design language, running through the entire body. The Jetta VS5 is powered by a 1.4-liter turbocharged engine (model code: EA211-DJS), delivering 150 horsepower and a maximum torque of 250 Nm. This engine reaches peak torque between 1,750 and 3,000 rpm and achieves maximum power output between 5,000 and 6,000 rpm.
5
3
Share

What Causes Loud Fan Noise When the Car Air Conditioner is On?

The reasons for loud fan noise when the car air conditioner is on are: 1. The air conditioner belt is loose or slipping; 2. The compressor is faulty; 3. There are foreign objects inside the blower or ventilation ducts. The solutions for loud fan noise when the car air conditioner is on are: 1. Replace the car air conditioner filter and remove any foreign objects; 2. Adjust the tightness of the compressor belt to increase friction or replace the belt; 3. Remove and inspect the compressor. The maintenance methods for the car air conditioner are: 1. Regularly clean the surfaces of the condenser and evaporator; 2. Pay attention to the operation of the compressor; 3. Close the external air circulation when there is a lot of dust in the air to reduce pollution of the air conditioner filter; 4. Regularly clean the air ducts and replace the air conditioner filter to keep the air inside the car fresh.
18
3
Share

What to do when the ABS and anti-skid lights of Roewe RX5 come on simultaneously?

If they do not turn off or frequently illuminate, it is necessary to conduct a thorough inspection. It is recommended to visit a repair shop to use an automotive diagnostic computer to read the fault codes and perform a check. These two systems share sensor control units and related wiring, so the issue might be with a wheel speed sensor, the control unit, or the wiring. Below is an introduction to car maintenance: 1. Introduction to car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Scope of car maintenance: Modern car maintenance mainly includes the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. Purpose of car maintenance: The purpose of car maintenance is to keep the car clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.