···
Log in / Register

What is the actual fuel consumption of the Leiling?

1 Answers
MacMichael
07/23/25 8:45pm

Leiling consumes 5.1 liters per 100 kilometers. Methods to reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly stepping hard on the accelerator, as this can multiply fuel consumption. Extra items increase the vehicle's weight, thereby increasing fuel consumption. Driving with windows open increases wind resistance; the greater the wind resistance, the more resistance the car faces, requiring more power, which also increases fuel consumption. Leiling Engine: The Leiling engine model is 4ZR, a new 1.2T engine with a maximum power of 85 kW (116 PS)/5200 to 5600 rpm and a maximum torque of 185 Nm/1500 to 4000 rpm. Compared to the previous 1.6L engine, the maximum power has decreased, but the maximum torque has significantly increased.

Was this review help?
7
0
Share
More Forum Discussions

What Do the Numbers on Motor Oil Mean?

The numbers on motor oil represent the following meanings: 1. Winter: Winter oil grades are: 0W, 5W, 10W, 15W, 20W, 25W. The symbol W stands for Winter, and the smaller the number before W, the lower the low-temperature viscosity, the better the low-temperature fluidity, and the lower the applicable minimum temperature. 2. Summer: Summer oil grades are: 20, 30, 40, 50. The larger the number, the higher the viscosity and the higher the applicable maximum temperature. 3. All-season: All-season oil grades are: 5W/20, 5W/30, 5W/40, 5W/50, 10W/20, 10W/30, 10W/40, 10W/50, 15W/20, 15W/30, 15W/40, 15W/50, 20W/20, 20W/30, 20W/40, 20W/50. The smaller the number representing the winter part, and the larger the number representing the summer part, the higher the viscosity and the wider the applicable temperature range.
5
0
Share

Does driving resistance increase or decrease in rainy weather?

Driving resistance decreases in rainy weather. The main factors affecting safe driving on rainy days include the following aspects: 1. Impaired visibility. 2. Slippery road surfaces. 3. Reduced traction. 4. Decreased friction. Here are some additional details: 1. If a heavy rain has just stopped and the road has been dried by the sun, this provides the best friction performance. 2. During rainy weather, impaired visibility and slippery road surfaces cause the wheel traction to decrease sharply as speed increases, making the wheels prone to skidding. At high speeds, vehicles are also susceptible to hydroplaning, so it is essential to control the speed appropriately.
9
1
Share

What does the red exclamation mark in the car mean?

Red exclamation mark (specifically a circle with an exclamation mark inside parentheses), this represents a warning for the braking system, mainly indicating a braking system malfunction or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark representing braking system faults, other exclamation marks on the car are yellow, indicating general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a general performance or component and function fault in the car. Main issues include parking sensor faults, fuel cut-off system intervention or faults, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant below the normal range. Transmission oil should be replaced promptly. Abnormal Tire Pressure: A horizontal line under parentheses with an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator light, indicating a fault in the car's lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem.
17
1
Share

Can a 92 Octane Engine Use 95 Octane Gasoline?

An engine designed for 92 octane gasoline can use 95 octane gasoline, but there may be certain impacts. Below is relevant information about 92 octane gasoline: 1. Fuel Introduction: "Motor Gasoline" (GB17930—2013) was jointly drafted and revised by the Petrochemical Research Institute of China Petroleum & Chemical Corporation, the Petrochemical Research Institute of China National Petroleum Corporation, and the China Automotive Technology and Research Center. Previous versions include GB17930—1999, GB17930—2006, and GB17930—2011. 2. Specification Indicators: "Motor Gasoline" (GB17930—2013) for the first time specifies a density index, set at 720~775kg/m³ at 20℃, to further ensure relatively stable fuel economy for vehicles. Compared with GB17930—2011, the most significant changes can be summarized as "three reductions, two adjustments, and one addition."
9
2
Share

What is the fuel consumption of the second-generation Eado?

The fuel consumption of the second-generation Eado ranges between 6.3-8.7L per 100 kilometers. Below is a related introduction to the second-generation Eado: 1. Power: It is equipped with a 1.4T high-pressure direct injection engine, with a peak power of 116kW and a peak torque of 260N·m. The transmission part is paired with a 7-speed wet dual-clutch gearbox, offering excellent power response and commendable gear shift smoothness, meeting the needs of most people. 2. Compliant with China VI standards: The 35MPa high-pressure direct injection system and the AGILE efficient ultra-clean combustion system ensure more complete combustion compared to other models in the same class, with a thermal efficiency of up to 40%. Most importantly, this vehicle also meets the China 6 emission standards.
16
0
Share

What's the Difference Between 6-Seater and 7-Seater?

Here are the specific differences between 6-seater and 7-seater vehicles: 1. Space: Generally, 6-seater vehicles adopt a 2+2+2 seating arrangement, while 7-seater vehicles use a 2+3+2 layout. Since 6-seaters don't have a seat in the middle of the second row, they feature a larger central aisle, making it more convenient for passengers to access the third row. 2. Annual Inspection: According to regulations, vehicles with six or fewer seats enjoy an exemption from inspection for the first six years, with inspections required every two years thereafter. Vehicles with seven or more seats are not eligible for this exemption and must undergo regular inspections as scheduled. 3. Insurance Costs: Insurance premiums are calculated based on the number of seats in the vehicle, with one standard for vehicles with six or fewer seats and another for those with six to ten seats. Therefore, insurance costs for 7-seater vehicles are generally higher than those for 6-seaters.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.