What is the actual fuel consumption of the Land Cruiser V6?

1 Answers
JudeFitz
07/30/25 9:52am
The Land Cruiser V6 version has a fuel consumption of 16 liters per 100 kilometers. Below is some relevant information about the Land Cruiser: 1. In terms of power, the Land Cruiser is equipped with two engines: a 4.0-liter V6 naturally aspirated engine and a 4.6-liter V8 naturally aspirated engine. The 4.0-liter V6 naturally aspirated engine has a maximum power of 202 kW and a maximum torque of 385 Nm. This engine reaches its maximum power at 5,600 rpm and its maximum torque at 4,400 rpm. The 4.6-liter V8 naturally aspirated engine has a maximum power of 228 kW and a maximum torque of 453 Nm. This engine reaches its maximum power at 5,500 rpm and its maximum torque at 3,400 rpm. 2. In terms of suspension, the Land Cruiser uses a double-wishbone independent suspension at the front and a four-link solid axle suspension at the rear.
Was this review help?
13
5
Share
More Forum Discussions

Is it normal for BYD batteries to degrade without needing replacement?

Replacement is necessary. The standard for BYD battery replacement due to degradation is as follows: If the battery capacity falls below 66% of the standard capacity, a new battery can be directly replaced. Below is an extended introduction: 1. Conditions for battery replacement: The core components of BYD new energy vehicles come with an 8-year or 150,000-kilometer warranty, while the battery cells are covered by a lifetime warranty. As long as the battery capacity drops below 66% of the standard capacity, a new battery can be directly replaced. 2. Introduction to the battery: The term "battery cell" is used instead of "battery" because a battery pack consists of multiple components such as the casing, wiring, power management system, cooling system, and battery cells. The battery cells are responsible for energy storage, while the other components are auxiliary. Other auxiliary components fall under the vehicle's three-guarantee policy. As long as the battery pack has not been manually disassembled, the entire battery will be replaced. After the warranty period expires, the battery cells can be replaced for free, but the costs associated with replacing the battery cells, including the repackaging of the battery pack, replacement of circuits and circuit boards, and labor costs, are borne by the user.
1
2
Share

How Long Does the First Car Maintenance Take?

If there is no need to queue, you can go to the 4S shop for maintenance. The first car maintenance takes about 1-2 hours. To avoid long waiting time, the car owner had better call the 4S shop to make an appointment for the first maintenance before going. Here is more relevant information: First maintenance time: The first car maintenance time is 3-5 months, and the first maintenance mileage is 3000 kilometers-5000 kilometers, and even some cars are as long as 8000 kilometers. The engine has a running-in period with the new car. Different brands and models of cars are equipped with different engines. Some engines adopt special technology and have strict requirements for engine oil; Some engine materials are special, with high precision, and the wear will be relatively small. Car owners must find out the first maintenance time or mileage of their cars, otherwise, if the first maintenance is done at the 4S shop beyond the first maintenance mileage or time stipulated by the manufacturer, it will affect the car owner's three maintenance rights.
15
3
Share

Where is the trunk opened?

The trunk button is located on the door next to the driver's seat or on the key fob. Here are the methods to open the trunk: 1. Open the door: Pull up the button below the door handle firmly, then push the trunk upwards to open it. 2. Press the button: Press the one-touch trunk opening button in the middle of the car key and hold it for about three seconds to open the trunk. Below is additional information on reasons why the trunk may not close: 1. Spring rod: The rear hatch uses overly stiff spring rods for the automatic lift switch. 2. Mismatch: The closing limit rubber block and the locking mechanism are not properly matched. 3. Malfunction: The trunk control circuit is faulty. 4. Support rod: The trunk hydraulic support rod is malfunctioning.
9
5
Share

Can You Stop and Wait While Changing Lanes?

You can stop and wait while changing lanes. Below are the standard procedures for lane changing: 1. Observe the situation before changing lanes: Before changing lanes, the driver should observe the traffic conditions behind, to the side, and in the lane they intend to change into using the interior and exterior rearview mirrors and side windows. 2. Use of turn signals: After confirming it is safe and meets the conditions for changing lanes, the driver should signal their intention to change lanes (e.g., turn on the left turn signal in advance when changing to the left lane) to alert other vehicles. 3. Lane changing technique: During the lane change, steer quickly but avoid excessive movement, aiming to merge into the adjacent lane along a smooth, curved path. Additionally, maintain acceleration throughout the maneuver while continuously monitoring the movements of vehicles ahead, behind, and to the sides. 4. Maintain straight driving after changing lanes: Once the vehicle has merged into the adjacent lane, immediately straighten the steering wheel to ensure the vehicle is centered in the lane and continues to drive straight.
1
4
Share

Which Button is the Car Air Conditioner?

In most cases, the car air conditioner is the AC button. Here is how to use the Civic's air conditioner: 1. Turn on the button: Press the ON/OFF button to start the air conditioner, and the compressor begins to work. When the compressor first starts, even if it is set to cooling, you may feel warm air blowing out. Wait until the water temperature normalizes. 2. Control the dual-zone air conditioner: There are AUTO buttons on both sides, which are for the dual-zone air conditioner, controlling the air conditioner's on/off and temperature settings for the driver and passenger. 3. Control the temperature: Use the knob to adjust the air conditioner temperature. Here is additional information on how to replace the air filter: 1. Choose the filter: Select the appropriate filter. 2. Open the filter: Unpack the new filter and check if it is intact. 3. Remove the filter: Take out the original car filter. 4. Remove the felt pad: Take off the felt pad covering the air vent. 5. Open the cover: After removing the felt pad, you will see a rectangular cover for the air filter. Pull the cover to the right to open it. 6. Replace the filter: Remove the old filter and install the new one.
7
0
Share

What to Do When the Car Key Won't Turn?

The reason the car key won't turn is that the automatic steering wheel lock function has been activated. Here are the relevant details: 1. The steering wheel lock is a car anti-theft feature designed to ensure vehicle safety. The solution is to insert the key, press the brake, and gently turn the steering wheel left and right. When the steering wheel is locked, it can be slightly moved. While turning the steering wheel, turn the key to complete the steering wheel unlocking process. 2. After turning off the engine, if you turn the steering wheel left or right or if the wheels are not aligned when parked, the applied force can cause the steering wheel to turn, triggering the self-locking function. This causes the steering lock pin and steering column to engage, preventing the steering wheel from turning. At this point, the vehicle's anti-theft system perceives a theft risk, thus locking the steering wheel to serve its anti-theft purpose.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.